Monessen Hearth MCUF42D SERIES dimensions Product Features, Before YOU Start

Page 5

PRODUCT FEATURES

WARNING

Do not attempt to burn solid wood fuels, vented gas log sets, or any other combustible in this unvented firebox. Also, do not install a vent-free gas log set in this firebox if the minimum clearance and height requirements of the log set are too large for the firebox.

The MCUF36D and MCUF42D Series are vent-free fireboxes. They feature a self contained heat-circulating system. This installation manual will enable you to obtain a safe, efficient and dependable installation of your vent-free firebox.

Do not alter or modify the firebox or its components under any circumstances. Any modification or alteration of the firebox system, including but not limited to the firebox and accessories, may void the warranty, listings and approvals of this system and could result in an unsafe and potentially dangerous installation.

BEFORE YOU START

Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately inform the dealer from whom you purchased the appliance. Do not attempt to install any part of the appliance unless you have all the parts in good condition.

MAKE SURE YOU HAVE RECEIVED ALL PARTS

Check your packing list to verify that all listed parts have been received. You should have the following:

1. Vent-Free Gas Firebox

4. Five (5) sheet metal screws for canopy

2.Canopy

3.Installation and Operating Instructions

WHAT YOU WILL NEED FOR INSTALLATION

TOOLS

 

BUILDING SUPPLIES

Phillips screwdriver

• Square

• Framing materials

Hammer

• Piping complying with local codes

• Wall finishing materials

• Saw and / or sabersaw

• Tee joint

• Caulking material (noncombustible)

Level

• Pipe wrench

• Fireplace surround materials (noncombustible)

Measuring tape

• Pliers

 

• Electric drill and bits

• Pipe sealant approved for use with propane/L.P.G. (resistant to sulfur compounds)

Refer to the installation instructions provided with the log sets for items required for log set installation.

NOTICE

Illustrations shown in this manual reflect “typical” installations with nominal dimensions and are for design and framing reference only. Actual installations may vary due to individual design preferences. However, always maintain minimum clearances to combustible materials and do not violate any specific installation requirements.

26D4720

5

Image 5
Contents Dimensions Required for What to do if YOU Smell GAS Do not Install AN ApplianceInstallation ModelsContents Owner Important Safety InformationInstaller Never connect unit to private Before YOU Start Product FeaturesFirebox Dimensions General Installation InformationLocation of Firebox General Installation Information and Location of FireboxMinimum Hearth Dimensions Clearance and Height Requirements Clearances and Height RequirementsTOP View Fireplace Framing Corner InstallationCustom Cabinet GAS Line Installation Installing Canopy Canopy InstallationBrass or Chrome Trim Optional EquipmentOptional Wide Canopy Forced AIR KIT BlotmcAccessories in Kits Illustrated Parts ListCombustion AIR Using Optional AK-4 Outside AIR KITInsulation Ring to Left Side of Fireplace Model AK-4 Combustion AIR AssemblyInstalling Model 403 Duct Connector 26D4720 Basic Warranty Five Year Warranty

MCUF42D SERIES specifications

The Monessen Hearth MCUF42D Series is a remarkable line of fireplaces designed to offer both functionality and elegance, perfect for any modern home. These units are built to provide efficient heating while maintaining a sleek and stylish aesthetic. One of the standout features of the MCUF42D series is its heat output capacity, designed to ensure that even large spaces are effectively warmed. With a powerful heat output of up to 40,000 BTUs, the MCUF42D can easily become the central heating source for a living area.

One notable technology incorporated in the MCUF42D series is its advanced combustion system. This system enhances fuel efficiency, allowing the fireplace to burn cleaner and produce fewer emissions. This not only benefits the environment but also contributes to lower heating costs for homeowners. Additionally, the series is designed with a high-efficiency rating, which means that it maximizes the heat produced from every unit of fuel consumed.

Aesthetically, the MCUF42D series does not compromise on style. It features a contemporary design that appeals to modern sensibilities, with options for various finishes and trims. Homeowners can customize their fireplaces with different front styles, such as traditional doors or a sleek modern face. The generous viewing area of the fireplace, framed by elegant glass doors, provides a beautiful view of the flames, creating an inviting atmosphere in any room.

Another outstanding characteristic of the MCUF42D series is the ease of installation. The unit is engineered for flexible venting options, allowing it to be installed in a variety of settings, whether it's a new or existing structure. This adaptability makes it an ideal choice for renovations or new builds.

Furthermore, the MCUF42D series incorporates features for ease of use and safety. The remote control operation allows users to adjust the heat settings and flames at their convenience, offering modern functionality. Safety features such as tempered glass doors and an automatic shut-off system provide peace of mind for families.

In summary, the Monessen Hearth MCUF42D series combines powerful heating capabilities, advanced technology, and stylish design. With its efficient performance and customizable options, it stands out as an excellent choice for those looking to enhance their living space with a contemporary fireplace that warms the home while elevating its aesthetic appeal.