Monessen Hearth MCUF42D SERIES Optional Equipment, Brass or Chrome Trim, Optional Wide Canopy

Page 14

OPTIONAL EQUIPMENT

BRASS OR CHROME TRIM

Optional brass trim kits can be used with unit when installed as a free standing fireplace with wood surround.

OPTIONAL WIDE CANOPY

The optional wide canopy can be installed. See installation instructions provided with kit.

FORCED AIR KIT (BLOTMC)

If you are installing the forced air kit, Model BLOTMC, on MCUF36D or MCUF42D models, see the installation instructions provided with the kit for electrical wiring requirements, or the blower installation section. The firebox must be connected to main power supply at time of firebox installation. The blower must be installed prior to the installation of the vent-free heater. The electrical connections must be made before the firebox is framed and enclosed in the finished walls.

WARNING WARNING

Electrical connections should only be performed by a qualified, licensed electrician, main power must be off when connecting to main electrical power supply or performing service.

The blower when installed, must be electrically grounded in accordance with local codes or in the absence of local codes, with the National Electrical Code ANSI Z..223.1/ NFPA 70.

This fireplace has a three-prong, grounded electrical plug. This plug helps protect you against electrical shock. Only connect plug to a properly grounded, three-prong receptacle. Do not cut or remove the grounded prong from this plug.

WARNING

Never attempt to service heater while it

 

 

is plugged in, operating, or hot. Burns

 

and/or electrical shock could result.

 

 

IMPORTANT: Always check local building codes. The installation must comply with local regulations as well as the national electric codes.

Any of the original wire as supplied with the fireplace must be replaced. Contact dealer for proper replacement wiring harness. (see parts list for part number). 120 volts, 60Hz, 1 amps.

Electrical power cord (plug) can be routed to exit the MCUF36D/MCUF42D on either the left side or the right side. Remove cord protector from side of unit, route power cord through hole opposite side. Reinstall cord protector.

 

 

 

Fan Switch

 

Thermostat

 

 

 

 

 

 

 

Control

110/115

OFF

 

 

 

 

 

Blower

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Motor

V.A.C.

Black

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

White

 

 

 

 

 

Black

Green

Figure 16 - BLOTMC Wiring Diagram

14

26D4720

Image 14
Contents Installation What to do if YOU Smell GAS Do not Install AN ApplianceDimensions Required for ModelsContents Owner Important Safety InformationInstaller Never connect unit to private Product Features Before YOU StartGeneral Installation Information Firebox DimensionsLocation of Firebox General Installation Information and Location of FireboxMinimum Hearth Dimensions Clearances and Height Requirements Clearance and Height RequirementsTOP View Corner Installation Fireplace FramingCustom Cabinet GAS Line Installation Canopy Installation Installing CanopyOptional Wide Canopy Optional EquipmentBrass or Chrome Trim Forced AIR KIT BlotmcIllustrated Parts List Accessories in KitsUsing Optional AK-4 Outside AIR KIT Combustion AIRModel AK-4 Combustion AIR Assembly Insulation Ring to Left Side of FireplaceInstalling Model 403 Duct Connector 26D4720 Five Year Warranty Basic Warranty

MCUF42D SERIES specifications

The Monessen Hearth MCUF42D Series is a remarkable line of fireplaces designed to offer both functionality and elegance, perfect for any modern home. These units are built to provide efficient heating while maintaining a sleek and stylish aesthetic. One of the standout features of the MCUF42D series is its heat output capacity, designed to ensure that even large spaces are effectively warmed. With a powerful heat output of up to 40,000 BTUs, the MCUF42D can easily become the central heating source for a living area.

One notable technology incorporated in the MCUF42D series is its advanced combustion system. This system enhances fuel efficiency, allowing the fireplace to burn cleaner and produce fewer emissions. This not only benefits the environment but also contributes to lower heating costs for homeowners. Additionally, the series is designed with a high-efficiency rating, which means that it maximizes the heat produced from every unit of fuel consumed.

Aesthetically, the MCUF42D series does not compromise on style. It features a contemporary design that appeals to modern sensibilities, with options for various finishes and trims. Homeowners can customize their fireplaces with different front styles, such as traditional doors or a sleek modern face. The generous viewing area of the fireplace, framed by elegant glass doors, provides a beautiful view of the flames, creating an inviting atmosphere in any room.

Another outstanding characteristic of the MCUF42D series is the ease of installation. The unit is engineered for flexible venting options, allowing it to be installed in a variety of settings, whether it's a new or existing structure. This adaptability makes it an ideal choice for renovations or new builds.

Furthermore, the MCUF42D series incorporates features for ease of use and safety. The remote control operation allows users to adjust the heat settings and flames at their convenience, offering modern functionality. Safety features such as tempered glass doors and an automatic shut-off system provide peace of mind for families.

In summary, the Monessen Hearth MCUF42D series combines powerful heating capabilities, advanced technology, and stylish design. With its efficient performance and customizable options, it stands out as an excellent choice for those looking to enhance their living space with a contemporary fireplace that warms the home while elevating its aesthetic appeal.