Napoleon Fireplaces GD45-P, GD45-N manual Operation / Maintenance, Operating Instructions

Page 19

19

OPERATION / MAINTENANCE

OPERATING INSTRUCTIONS

When lit for the first time, the fireplace will emit a slight odour for a few hours. This is a normal temporary condi- tion caused by the curing of the logs and the "burn-in" of internal paints and lubricants used in the manufacturing process and will not occur again. Simply open a window to sufficiently ventilate the room.

After extended periods of non-operation such as following a vacation or a warm weather season, the fireplace may emit a slight odour for a few hours. This is caused by dust particles in the heat exchanger burning off. Open a window to sufficiently ventilate the room.

Purge the gas line with the glass door open. assure that a continuous gas flow is at the burner before closing the door. Allow several minutes (5-15) for the flame to stabilize after ignition.

FOR YOUR SAFETY READ BEFORE LIGHTING:

A. This fireplace is equipped with a pilot which must be lit by hand while following these instructions exactly.

B. Before operating smell all around the fireplace area for gas and next to the floor because some gas is heavier than air and will settle on the floor.

C. Use only your hand to turn the gas control knob. Never use tools. If the knob will not turn by hand, do not try to repair it. Call a qualified service technician. Force or at- tempted repair may result in a fire or explosion.

D. Do not use this fireplace if any part has been under water. Immediately call a qualified service technician to inspect the fireplace and replace any part of the control system and any gas control which has been under water.

WHAT TO DO IF YOU SMELL GAS

Turn off all gas to the fireplace.

Open windows.

Do not try to light any appliance.

Do not touch any electric switch; do

not use any phone in your building.

GAS KNOB

 

Immediately call your gas supplier from a neighbour's phone. Follow the gas supplier's instructions.

If you cannot reach your gas supplier, call the fire de- partment.

LIGHTING INSTRUCTIONS

WARNING: The gas valve has an interlock device which will not allow the pilot burner to be lit until the thermocou- ple has cooled. Allow approximately 60 seconds for the thermocouple to cool.

When lighting and relighting, the gas knob cannot be turned from pilot to off unless the knob is depressed slightly.

1.Stop! Read the above safety information on this label.

2.Turn off all electric power to the fireplace.

3.Turn the gas knob clockwise to off.

4.Wait five (5) minutes to clear out any gas. If you smell gas including near the floor. Stop! Follow "B" in the above safety information on this label. If you don't smell gas go the next step.

5. Turn gas knob counter-clockwise to pilot.

6.Depress slightly and hold gas knob while lighting the pilot with the push button igniter. Keep knob depressed for one minute, then release. If pilot does not continue to burn, repeat steps 3 through 5.

7.With pilot lit, depress and turn gas knob counter-clock- wise to on.

8.If equipped with remote on-off switch/thermostat, main burner may not come on when you turn valve to on. Remote switch must be in the on position to ignite burner.

9.Turn on all electric power to the fireplace.

TO TURN OFF GAS

1.Turn off all electric power to the fireplace if service is to be performed.

2.For a complete shutdown procedure: push in gas con- trol knob slightly and turn clockwise to off. Do not force.

3.For a temporary showdown procedure: set thermostat to lowest setting or remote switch to off. Press and turn the gas knob clockwise to pilot.

W415-0100 / D / 01.13.04

Image 19
Contents GAS Direct Vent Millivolt System Table of Contents Napoleon GAS Fireplace Presidents Lifetime Limited Warranty General Information General InstructionsCare of GLASS, and Plated Parts Venting Lengths VentingVenting Option #2 Venting Option #1Venting Option #4 Venting Option #3AIR Terminal Installations Horizontal Installation Installation Wall and Ceiling ProtectionVertical Installation Horizontal AIR Terminal Installation Using Flexible Vent ComponentsFireplace Vent Connection Restricting Vertical VentsVertical Venting Installation Using Rigid Vent ComponentsFraming Installation / FramingInstallation Mobile Home InstallationFinishing GAS InstallationLOG Placement Door Opening L45 Louvre InstallationTrim Installation GDL45 Louvre InstallationOptional Blower Installation GD36 Thermostatic Sensor Control Optional FAN InstallationOperating Instructions Operation / MaintenanceVenturi Adjustment AdjustmentsMaintenance Pilot Burner AdjustmentReplacement Parts ReplacementsAccessories W415-0100 / D Symptom Problem Test Solution Trouble Shooting GuideDo not Clean Glass When HOT

GD45-N, GD45-P specifications

The Napoleon Fireplaces GD45-P and GD45-N are two standout models in the realm of contemporary gas fireplaces, beautifully integrating style with advanced technology and functionality. Designed to cater to modern living spaces, both models boast a sleek design that fits seamlessly into various home aesthetics, making them a popular choice among homeowners and designers alike.

One of the main features of the GD45-P and GD45-N is their impressive heating capability. With a robust output of up to 40,000 BTUs, these fireplaces are not only visually striking but also efficient in providing warmth during colder months. They are well-suited for large rooms, ensuring that family gatherings can be enjoyed in a cozy environment.

The Napoleon GD45 series employs cutting-edge technology to enhance usability and performance. One such technology is the advanced electronic ignition system, which ensures that starting the fireplace is as simple as pressing a button. The fireplaces also include a variable flame control option, allowing users to adjust the height and intensity of the flames for ambiance as well as heating needs. This feature provides a customizable experience, allowing homeowners to create the perfect atmosphere for any occasion.

Another significant aspect of the GD45-P and GD45-N is their emphasis on efficiency. Operating with an impressive 78% energy efficiency rating, these units are designed to minimize heat loss, keeping energy costs manageable while maximizing comfort. Furthermore, they are equipped with a unique dual burner system, which enhances flame realism and creates a mesmerizing effect that mimics the comfort of traditional wood-burning fireplaces.

Both models feature an extensive selection of decorative options, including a range of fire media like ceramic stones and crystal glass, which allow users to tailor the appearance of the fireplace to their personal taste. The glass front design also maximizes viewing area, ensuring the beauty of the flames can be enjoyed from various angles in the room.

Installation is streamlined with the GD45-P and GD45-N, thanks to their direct venting design. This means that venting can be executed easily through walls or ceilings, providing flexible installation options that accommodate various home layouts.

In summary, Napoleon Fireplaces GD45-P and GD45-N represent the perfect fusion of aesthetics, efficiency, and technological innovation. With exceptional heating capabilities, customizable flame options, and a variety of installation possibilities, these fireplaces are an inviting addition to any modern home. Their striking design paired with functional features ensures they stand out as both a heating solution and a stylish focal point within any living space.