Operation / Maintenance

GAS KNOB

OPERATING INSTRUCTIONS

When lit for the first time, the fireplace will emit a slight odour for a few hours. This is a normal temporary condi- tion caused by the curing of the logs and the "burn-in" of internal paints and lubricants used in the manufacturing process and will not occur again.

FOR YOUR SAFETY READ BEFORE LIGHTING:

A. This fireplace is equipped with a pilot which must be lit by hand while following these instructions exactly.

B. Before operating smell all around the fireplace area for gas and next to the floor because some gas is heavier than air and will settle on the floor.

C. Use only your hand to turn the gas control knob. Never use tools. If the knob will not turn by hand, do not try to repair it. Call a qualified service technician. Force or at- tempted repair may result in a fire or explosion.

D. Do not use this fireplace if any part has been under wa- ter. Immediately call a qualified service technician to in- spect the fireplace and replace any part of the control sys- tem and any gas control which has been under water.

After extended periods of non-operation such as following a vacation or a warm weather season, the fireplace may emit a slight odour for a few hours. This is caused by dust particles in the heat exchanger burning off. In both cases, open a window to sufficiently ventilate the room.

Purge all gas lines with the glass door of the fireplace removed. Assure that a continuous gas flow is at the burner before installing the door.

WHAT TO DO IF YOU SMELL GAS

•Turn off all gas to the fireplace.

•Open windows.

•Do not try to light any appliance.

•Do not touch any electric switch; do

not use any phone in your building.

•Immediately call your gas supplier from a neighbour's phone. Follow the gas supplier's instructions.

•If you cannot reach your gas supplier, call the fire de-

partment.

	OL
		N	O
	HI	N	F
		O	F
			P
	FLAME		TOLI
TOLI	FLAME
TOLI	ADJUSTMENTPILOT
P
	KNOB	ON/OFF
	KNOB	KNOB
		KNOB

LIGHTING INSTRUCTIONS

WARNING: The gas valve has an interlock device which will not allow the pilot burner to be lit until the thermocou- ple has cooled. Allow approximately 60 seconds for the thermocouple to cool.

When lighting and re-lighting, the gas knob cannot be turned from pilot to off unless the knob is depressed slightly.

1.Stop! Read the above safety information on this label.

2.Turn off all electric power to the fireplace.

3.Turn the gas knob clockwise to off.

4.Wait five (5) minutes to clear out any gas. If you smell gas including near the floor. Stop! Follow "B" in the above safety information on this label. If you don't smell gas go the next step.

5.Turn gas knob counter-clockwise to pilot.

6.Depress slightly and hold gas knob while lighting the pilot with the push button ignitor. Keep knob depressed for one minute, then release. If pilot does not continue to burn, repeat steps 3 through 5.

7.With pilot lit, depress and turn gas knob counter-clock-

wise to on.

8.If equipped with remote on-off switch/thermostat, main burner may not come on when you turn valve to on. Remote switch must be in the on position to ignite burner.

9.Turn on all electric power to the fireplace.

TO TURN OFF GAS

1.Turn off all electric power to the fireplace if service is to 2. Push in gas control knob slightly and turn clock-

be performed.

wise

to off. Do not force.

W415-0377 / C / 09.23.05

BGNV42P, BGNV42N specifications

Napoleon Fireplaces has long been a trusted name in the world of heating solutions, and their BGNV42N and BGNV42P models continue to uphold that reputation with advanced features and innovative technologies. These versatile gas fireplaces are designed to deliver both aesthetic appeal and high-performance heating, making them an ideal choice for homeowners seeking warmth and ambiance.

One of the standout features of the BGNV42N and BGNV42P is their impressive heating capacity. With up to 35,000 BTUs, these fireplaces provide substantial warmth, ensuring that your living space remains cozy even during the coldest months. The large viewing area, combined with the fireplace's stylish design, allows for a beautiful flame presentation that enhances the ambiance of any room.

Both models come equipped with Napoleon's patented PHAZER heat exchanger technology, which maximizes heat output while improving efficiency. This system captures and recirculates warm air, allowing the fireplace to heat your space effectively without significant loss of energy. Additionally, the fireplaces are designed to operate quietly, ensuring a peaceful environment as you enjoy the flickering flames.

The user-friendly features of the BGNV42N and BGNV42P also stand out. With intuitive controls, homeowners can easily adjust the flame height and temperature settings to suit their preferences. The models include a forced air circulation fan option, which helps distribute heat evenly throughout the room, enhancing comfort levels.

In terms of design, the Napoleon BGNV42N and BGNV42P are customizable to fit a range of décor styles. The sleek, modern lines and various decorative media options, including logs, stones, and crystals, allow homeowners to create a distinctive look that complements their interior design. Both models are available in natural gas and propane configurations, providing flexibility based on existing home systems.

Safety is a top priority for Napoleon, and the BGNV42N and BGNV42P come equipped with advanced safety features, including a safety shut-off system that activates in the event of a malfunction. The glass front ensures that flames are contained, providing peace of mind for families with children and pets.

In conclusion, the Napoleon Fireplaces BGNV42N and BGNV42P models combine powerful heating capabilities with stylish design and innovative technology. Whether you're looking to enhance the comfort of your home or create a stunning focal point, these gas fireplaces efficiently deliver warmth and elegance, making them an excellent choice for today’s homeowners.