Napoleon Fireplaces BGNV42P, BGNV42N LOG Placement, Charcoal Embers, Vermiculite, Charcoal Lumps

Page 9

LOG PLACEMENT

PHAZERTM logs and glowing embers, exclusive to Napoleon Fireplaces, provide a unique and realistic glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect. Log colours may vary. During the initial use of the fireplace, the colours will become more uniform as colour pigments burn in during the heat activated curing process.

FIGURES 19a-e

#1

1.Place the back log (#1) onto the log support tray and in front of the tabs. The tabs maintain an air space between the log and firebox back to facilitate combustion air flow. Ensure that the back of the log rests against the brackets on the back wall of the firebox.

#2#3

2.Move the two small logs (#2 & #3) into position, lining up the studs located on the

GLOWING EMBERS

burner with the holes on the bottom of the logs.

3.Tear the glowing embers into pieces and place along the front row of ports covering all of the burner area in front of the small logs (#2 & #3). Care should be taken to shred the embers into thin, small irregular pieces as only the ex- posed edges of the fibre hairs will glow. The ember material will only glow when exposed to direct flame; however, care should be taken to not block the burner ports. Blocked burner ports can cause an incorrect flame pattern, carbon deposits

9

#5

#4

4.Place the bottom of the left crossover log (#4) against the left outermost grate post and the top into the pocket provided on the back log. Position the notch located on the end of the center log (#5) against the middle grate post with the other end of the log resting in the pocket of the left crossover log.

#6

5.Place the bottom of the right crossover log (#6) against the right outermost grate post and the top into the pocket provided on the center log (#5).

CHARCOAL EMBERS

Randomly place the charcoal embers along the front and sides of the log support tray in a realistic manner. Fine dust found in the bottom of the bag should not be used.

VERMICULITE

Sprinkle vermiculite around the charcoal embers.

Note: Both charcoal embers and vermiculite are not to be placed on the burner.

CHARCOAL LUMPS

Place the lumps between the logs in a realistic manner taking care not to block any of the burner ports.

W415-0377 / C / 09.23.05

Image 9
Contents Millivolt System Table of Contents Napoleon GAS Fireplace Presidents Lifetime Limited Warranty General Instructions Care of GLASS, and Plated PartsGeneral Information High Limit Switch Vent Safety SwitchPlunger HI Limit Switch VentingGAS Installation Framing InstallationWire Size MAX. Length Flexible CONNECTOR. FigureMantle Clearances Nailing TAB InstallationL42 Louvre Installation Door Installation Louvre Bracket InstallationGDL42 Louvre Installation Logo PlacementCharcoal Embers LOG PlacementVermiculite Charcoal LumpsInstallation to be Done by a Qualified Installer Optional Blower InstallationThermostatic Sensor Control Optional FAN InstallationOperating Instructions Operation / MaintenanceMaintenance AdjustmentsPilot Burner Adjustment Venturi AdjustmentfigureReplacement Parts ReplacementsAccessories # Part NO. DescriptionSymptom Problem Trouble Shooting GuideDo not Clean Glass When HOT Test Solution

BGNV42P, BGNV42N specifications

Napoleon Fireplaces has long been a trusted name in the world of heating solutions, and their BGNV42N and BGNV42P models continue to uphold that reputation with advanced features and innovative technologies. These versatile gas fireplaces are designed to deliver both aesthetic appeal and high-performance heating, making them an ideal choice for homeowners seeking warmth and ambiance.

One of the standout features of the BGNV42N and BGNV42P is their impressive heating capacity. With up to 35,000 BTUs, these fireplaces provide substantial warmth, ensuring that your living space remains cozy even during the coldest months. The large viewing area, combined with the fireplace's stylish design, allows for a beautiful flame presentation that enhances the ambiance of any room.

Both models come equipped with Napoleon's patented PHAZER heat exchanger technology, which maximizes heat output while improving efficiency. This system captures and recirculates warm air, allowing the fireplace to heat your space effectively without significant loss of energy. Additionally, the fireplaces are designed to operate quietly, ensuring a peaceful environment as you enjoy the flickering flames.

The user-friendly features of the BGNV42N and BGNV42P also stand out. With intuitive controls, homeowners can easily adjust the flame height and temperature settings to suit their preferences. The models include a forced air circulation fan option, which helps distribute heat evenly throughout the room, enhancing comfort levels.

In terms of design, the Napoleon BGNV42N and BGNV42P are customizable to fit a range of décor styles. The sleek, modern lines and various decorative media options, including logs, stones, and crystals, allow homeowners to create a distinctive look that complements their interior design. Both models are available in natural gas and propane configurations, providing flexibility based on existing home systems.

Safety is a top priority for Napoleon, and the BGNV42N and BGNV42P come equipped with advanced safety features, including a safety shut-off system that activates in the event of a malfunction. The glass front ensures that flames are contained, providing peace of mind for families with children and pets.

In conclusion, the Napoleon Fireplaces BGNV42N and BGNV42P models combine powerful heating capabilities with stylish design and innovative technology. Whether you're looking to enhance the comfort of your home or create a stunning focal point, these gas fireplaces efficiently deliver warmth and elegance, making them an excellent choice for today’s homeowners.