Acroprint ES700 user manual Wall Mounting, Install Wall-Mount Screws, Hang Unit

Page 38

WALL MOUNTING

The ES700 should be mounted on 1/2 inch drywall using two ST 4x20 screws and fasteners.

1.Install the supplied wall-mount screws by using the template. Refer to Install Wall-Mount Screws below.

Be sure to keep about 6mm (1/4") of the screw head away from the wall. The recommended height from the floor to the bottom of the unit is 45".

:$//

Install Wall-Mount Screws

2.Open the unit. Refer to “Open Unit” on page 3.

3.Hang the unit on the wall and install Wall Mount Brackets. Refer to Hang Unit below.

Hang Unit

4. Close the unit. Refer to “Close Unit” on page 4.

32

Image 38

Contents ES700 Table of Contents Page Alert Definitions Precautions Features IntroductionES700 EquipmentOpen and Close Unit Open UnitClose Unit Close UnitPrint Position on Time Card Power the Unit/Print PositioningPower the Unit Important Things to Remember When Using the ES700 Set Time Zone -5 EST, -6 CST, -7 MST, -8 PST Automatically Receive Atomic SignalAtomic Synchronization Turn DST OFFAtomic Synchronization Time Zones Default = ES-05 ES-05Time Recorder Function Buttons Program the Time RecorderTime Recorder Menu Change Hour SettingsTime Change MinuteChange Month DateChange Year Hour Display Options 12/24 Hour FormatChange Date Print Order Refer to Print Order Options onPrint Order Options Year DigitChange Year Digit Year Digit Options Hour/MinuteChange Hour/Minute Type of Hour OptionsType of Minute Options Leading Zero Options Leading ZeroChange Leading Zero Change Comment Options Preset CommentsPreset Comment Options Language Language OptionsPrint Length Print Length ExamplesPrint Direction Options Print MethodChange Print Direction Press Push Bar Change Print ActivationPrint Activation Options Daylight Saving Time DST DSTManually Setting DST ExampleChange the Month End Date Set Password Change the First Two Digits Change the Last Two DigitsSet the First Two Digits Enter PasswordCancel the Password Set the Last Two DigitsReset Factory Default Settings Press Reset ButtonFactory Default Settings RcvdHang Unit Install Wall-Mount ScrewsWall Mounting Tighten Ribbon Cassette Replacing the Ribbon CassetteRemove Ribbon Cassette Install Ribbon Cassette Install Ribbon Cassette Between Print Head and Ribbon MaskClose the unit. Refer to Close Unit on Other Failures TroubleshootingError No. Appears Specifications Page Product Registration Card Page Page Departure Drive Raleigh, NC 27616 USA 919.872.5800

Related manuals

Manual 2 pages 57.57 Kb