Vermont Casting JUVSR 3096, JUVSM 3096 operation manual Assembly Procedures, Unpack the Stove

Page 9

Vermont Castings Jefferson Vent Free Gas Heater

Assembly Procedures

Unpack the Stove

Remove the stove assembly from the shipping carton and inspect it for loose or damaged parts. Do not install this appliance if any parts are loose or if there is any visual or suspected damage resulting from shipping or handling. Report damage to your dealer/distributor immediately. The log set is packaged in the box shipped inside the firebox.

To remove the packaged log set from the firebox:

•Lift the stove front up and then swing the bottom out and away to disengage it from the stove body. (Fig. 4) Cut the wire tie securing the screen.

•Remove the screen frame. (Fig. 5)

•Remove box and set aside.

Contact your dealer if the burner is loose or damaged in any way.

ST229b

Fig. 4 Remove stove front.

Screen Hooks

ST208b

Fig. 5 Lift screen from firebox.

20003447

WARNING

Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved for use with this heater may result in property damage or personal injury.

CAUTION

Porcelain enamelled surfaces are fragile. Handle porcelain enamelled castings tenderly. Familiarize yourself with the assembly steps before you begin and proceed with deliberation and care. If possible, have assistance available.

Place enamelled castings on a soft, cushioned surface until you are ready to assembly.

Avoid contact between the castings and other hard surfaces or objects.

Optional Fan Kit Installation (2960/FK28)

1.Attach the fan to the rear shroud by engaging the upper flange of the fan skirt under the lower edge of the shroud and secure the skirt with the four screws and one star washer provided. (Fig. 6,7)

Upper

Flange

To Control

Valve

Star Washer

ST240

Fig. 6 Place upper flange behind lower edge of shroud.

 

ST241

Fig. 7

Correct position of fan skirt installation.

 

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Jefferson Table Of Contents Carbon Monoxide Poisoning MAY Lead to Death Installation & Operating InstructionsJefferson Vent Free dimensions Juvs DimensionsMinimum Clearances to Combustible Materials Hearth RequirementsMantel Mantel from Shelf Depth Stove Top Gas Inlet and Manifold Pressures Gas SpecificationsHigh Elevations Odor During OperationFresh Air Requirements for Combustion Ventilation Vent Free FeaturesProvide for Adequate Ventilation Unusually Tight ConstructionSupplementing ventilation air Optional Fan Kit Installation 2960/FK28 Assembly ProceduresUnpack the Stove To remove the packaged log set from the fireboxModels only Install ON/OFF SwitchThermostat Connection optional Install the Log SetConnect the Gas Supply Line Maximum RunEngage with side ribs Install the Stove FrontFlame Characteristics Flame & Temperature AdjustmentYour First Fire Pilot and Burner InspectionWhat to do if YOU Smell GAS To Turn Off Gas To HeaterTroubleshooting No spark at pilot when Ignitor is operatedIgnitor Electrode sparks, but Pilot does not light Pilot lights but Main Burner does not Main Burner shuts off and PilotFlame goes out while in operation Firebox Cleaning and Inspection MaintenanceCleaning Procedure Care of Cast IronJefferson Vent Free Gas Heater Juvs Juvs DescriptionOptional Accessories Remote ControlsFan Kits Limited Lifetime Warranty Vermont Castings, Majestic Products

JUVSR & JUVSM 3095, 3096, 3097, 3100, 3101, 3102, 3105, 3106, 3107, 3110, 3111, 3112, JUVSR 3096, JUVSM 3096, JUVSR, JUVSM, 3095, 3096, 3097, 3100, 3101, 3102, 3105, 3106, 3107, 3110, 3111, 3112 specifications

Vermont Castings is renowned for its commitment to quality and craftsmanship in the realm of home heating, with its JUVSR and JUVSM series standing out as premier options for wood-burning stoves. The JUVSR and JUVSM models, including the 3095, 3096, 3097, 3100, 3101, 3102, 3105, 3106, 3107, 3110, 3111, and the 3112, are designed for optimal performance, efficiency, and aesthetics, showcasing the brand's dedication to both traditional and contemporary design.

These stoves are constructed from high-quality cast iron, ensuring durability and improved heat retention. The JUVSR uses a more traditional design appeal, while the JUVSM series leans towards a sleek, modern aesthetic, catering to diverse homeowner preferences. Each model has a variety of size options, making them suitable for both small and large spaces.

One of the standout features of these models is their innovative air wash system that keeps the glass clean, providing a clear view of the beautiful fire within. This technology not only enhances the visual experience but also ensures a more efficient burn by promoting better air circulation.

The JUVSR and JUVSM stoves are equipped with Vermont's patented dual-air control system, which allows users to manage the burn rate effectively. This flexible system gives users the ability to choose between a high-output burn for quick warmth or a slower, longer-lasting heat. The JUVSR and JUVSM series also include advanced emissions technology that adheres to stringent environmental standards, making them an eco-friendly choice for heating.

Another significant characteristic of these models is their versatility in fuel choice, as they can efficiently burn seasoned wood, enhancing their functionality and appeal. The range is designed with ease of use in mind, featuring a straightforward loading door and a convenient ash pan for hassle-free cleaning and maintenance.

The Vermont Castings JUVSR and JUVSM stoves, including models like the 3095, 3096, and beyond, succeed in combining efficiency, ease of use, and aesthetic appeal. Their reliability and superior heating capabilities make them a preferred choice for environmentally conscious homeowners seeking comfort in the colder months. Ultimately, whether you opt for the JUVSR's traditional elegance or the JUVSM's modern functionality, you are investing in quality craftsmanship that stands the test of time.
Top Page Image Contents