Vermont Casting MEAD3BS, MEAD3EB Left Corner Trim Center Trim Hex Head Bolt Right Corner Trim

2.Attach the left corner trim to the mantel assembly using one (1) 1/4-20 x 5/8” hex head bolt and one (1) flat washer. (Fig. 12)

3.Attach the right corner trim to the mantel assembly using one (1) 1/4-20 x 5/8” hex head bolt and one (1) flat washer. (Fig.

12)

4.Attach the center trim to the mantel as- sembly between the left and right ends using one (1) 1/4-20 x 5/8” hex head bolt and one (1) flat washer in the center of the mantel. (Fig. 12)

5.Using four (4) flat washers and four (4) 1/4-20 x 3/8” hex head bolts, attach the left corner trim and right corner trim to the center trim. (Fig. 12)

Figure 12

Left Corner Trim

Center Trim 3/8” Hex Head Bolt

Right Corner Trim

5/8” Hex Head Bolt

KT663a

6.Using a straight edge gently placed

against the front edge of the mantel assembly, align the left, right and center mantels. Tighten all fasten- ers snugly. Be careful not to over-tighten.

7.Using four (4) flat washers and four (4) 1/4-20 x 3/8” hex head bolts, attach the trim columns to the left and right corner trims finger tight only. (Fig. 13)

8.Using the measuring tape, measure between the columns to assure equal distance within the opening. First check the distance between columns near the top of the unit and then at the bottom of the columns. Adjust accordingly and securely tighten.

Figure 13

Left Trim Column

Right Trim Column

3/8” Hex Head

Bolts

Mantel Assembly

KT669

8 30004451