Guidelines, Match Lighting | Vermont Casting UE181N, UC241L, UE241N

Guidelines

After your installer does the test burn, the log set should be operated either with the chimney open or, in the absence of a chimney, with a window open approxi- mately 1-2 inches. This operation should last for about 2-3 hours to cure the logs and dissipate any residual fumes from the new unit.

This unvented gas log heater must not be used with glass doors closed. If used with glass doors, the mesh curtain or panels must be closed. The glass doors must be open to allow combustion air to the appliance.

When used without glass doors, a fireplace screen or free standing screen must be in place. The screen must have openings for the introduction of combustion air.

Always maintain a clear area of at least 3 feet in front of the fireplace.

Periodically, check the pilot. The flame should be present if the main supply or safety control valve knob are not in the “OFF” position.

This unvented gas log set operates as a room heater when the flue damper is closed. It is equipped with an Oxygen Depletion Sensor pilot light system that will automatically shut off the entire unit if the oxygen level falls below a safe level. Open a window slightly to allow fresh air into the room when operating the gas log set as a heater.

NOTE: Unvented gas log owners usually prefer to operate their sets with the chimney damper closed. This will put all the heat into the room. However, there may be times you will desire the full flames of the Hi heat setting but will find the heat output excessive. You can open the chimney damper (if you have one) fully or partially to release some of the heat.

WARNING: Damper handle will be hot if heater has been operating.

Appliance Lighting Instructions

NOTE: Pilot assembly is mounted to the burner tube support channel.

1.STOP! Read the safety information on Page 8. If a fabricated firebox with a blower fan is used with this appliance, turn off electrical power to the fan before lighting. Turn the manual gas control knob clockwise to the full “OFF” positionDO. NOT FORCE.

2.Wait 5 minutes to clear out any gas. Then smell for gas including near the floor. If you smell gas, STOP! Follow instruction “B” in the safety information on Page 8. If you do not smell gas, go to the next step.

3.From the “OFF” position, turn the control knob

counterclockwise to “PILOT”.

4.Push in the control knob all the way and hold in. Immediately light the pilot by depressing the piezo ignitor button at least once every second until a flame appears at the pilot assembly. Continue to hold the control knob in for about 1 minute after the pilot is lit. Release the knob, and it will pop back up. The pilot should remain lit. If it goes out, repeat Steps 1 and 3.

5.Turn the control knob counterclockwise to the desired setting.

Match Lighting

1.If the pilot cannot be lighted with the piezo ignitor, it can be manually lit with a match.

2.Light the match and with the right hand, depress and turn the control knob to the PILOT” position.

3.With the lighted match, ignite the pilot.

4.Continue to hold the control knob in for an additional 30 seconds to ensure the pilot remains lighted.

Piezo Ignitor

Control

Knob

FP1500

Fig. 7 Control knob.

3311243

UE241N, UE181L, UE181N, UC241L, UC181N specifications

Vermont Casting is renowned for its commitment to quality and craftsmanship when it comes to wood stoves and outdoor fireplaces. Among their impressive lineup, the UE241N, UC181N, UC181L, UE241L, and UE181N models stand out, offering a range of innovative features and technologies designed to enhance your heating experience while maintaining an environmentally friendly footprint.

The UE241N and UE241L are versatile wood stoves with excellent heating capabilities. They feature an efficient combustion system that ensures maximum heat output while minimizing smoke emissions. Both models are designed with Vermont Casting's signature construction, providing durability and longevity. The easy-to-use air control system allows users to easily adjust airflow for optimal burning efficiency, making it suitable for various wood types and moisture levels.

On the other hand, the UC181N and UC181L models offer an elegant and stylish design that complements any home décor. These units come with a large glass door, providing a beautiful view of the fire and enhancing the ambiance of your living space. The UL-approved models are also equipped with an advanced secondary combustion system, which significantly reduces particulate emissions and promotes cleaner burning.

The UE181N is a compact yet powerful heating solution ideal for smaller spaces that require efficient warming. It features a high-efficiency design with a remarkable heating capacity that belies its size, ensuring that even the coldest rooms can be cozy and warm. Its modern, clean lines and black finish enhance its aesthetic appeal, while the efficient design means less time spent refueling and maintaining your fire.

All these models are built with quality craftsmanship and rigorous testing, ensuring they meet the highest standards for both performance and safety. Vermont Casting also prioritizes eco-friendly practices, with each unit adhering to EPA regulations for emissions, making it an ideal choice for environmentally conscious homeowners.

In summary, the Vermont Casting UE241N, UC181N, UC181L, UE241L, and UE181N wood stoves embody a perfect blend of style, efficiency, and sustainability. With their advanced combustion technologies, elegant designs, and durable materials, these stoves promise not just warmth but also a beautiful focal point for any home. With the perfect balance of form and function, these models are truly a testament to Vermont Casting's dedication to excellence in wood heating solutions.