Vermont Casting 1610CE installation instructions Maintenance Schedule, Stove, Chimney Connector

Page 24

Defiant 1610CE Non-Catalytic Woodburning Stove

Clean the chimney connector by disconnecting the sec- tions, taking them outside, and removing any deposits with a stiff wire brush. Reinstall the connector sections after cleaning, being sure to secure the joints between individual sections with sheet metal screws.

If you cannot inspect or clean the chimney yourself, contact your local Vermont Castings dealer or a profes- sional chimney sweep.

Maintenance Schedule

The stove and chimney system should be inspected and maintained by a qualified engineer and include the

following:

The Stove

DAILY:

•Clear any ash build-up from around the air holes and combustion flow path in the lower fireback.

•Ashes should be removed before they reach the top of the ash pan. Check accumulation at least once a day.

•Keep the area around the stove clear of any com- bustible materials such as wood, furniture or cloth- ing.

TWO MONTHS:

•Check door handle to be sure it is working properly. Gasketing becomes compressed after a period of time. Adjust handle tightness if necessary.

•Check leg bolts and heat shield screws; tighten if necessary.

ANNUAL SPRING CLEANING:

•Check gasketing for wear, and replace if necessary.

•Remove ashes from the ash pan and replace with a moisture absorbing material (such as kitty litter) to keep the interior of the stove dry.

•Clean the dust from the inner sides of bottom, rear or pipe heat shields if your stove is equipped with them. Clean surfaces are better heat reflectors than dirty surfaces.

•Touch up the black paint.

•Inspect for and remove ash build-up behind the com- bustion package. This should be done in conjunction with annual cleaning of the chimney connector since this inspection is most conveniently done through the flue collar opening. Inspect the passages to either side of the combustion package (a mirror will be

helpful) and vacuum away ash using a flexible vacu- um hose inserted into each passage. Care should be taken not to damage the white fibrous material in this rear chamber. (Fig. 41)

Inspect and

Vacuum Both

Rear Corners

Ash Build-up

ST856

Fig. 41 Inspect and clean out ash accumulation on either side of the non-catalytic combustion system.

The Chimney Connector

TWO WEEKS:

•Inspect the chimney connector and chimney. Clean if necessary.

TWO MONTHS:

•Inspect the chimney and chimney connector. Pay particular attention to the horizontal runs of chimney connector, and the elbows. Clean the system if nec- essary.

ANNUAL SPRING CLEANING:

•Disassemble the chimney connector and take it outdoors for inspection and cleaning. Replace weak sections of connector.

•Inspect the chimney for signs of deterioration. Re- pairs to a masonry chimney should be made by a professional mason. Replace damaged sections of prefabricated chimney. Your local Dutchwest dealer or a chimney sweep can help determine when re- placement is necessary.

•Thoroughly clean the chimney.

24

30003846

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Defiant Welcome Save These Instructions for Future ReferenceTable of Contents Story of the DefiantSpecifications Defiant, Model 1610CEInstallation Outside AirChimney Height Chimney Connector Guidelines What Kind of Chimney to UseMasonry Chimneys Prefabricated ChimneysSingle-wall Chimney Connectors Securing the Single-wall Connector to a Masonry ChimneyFreestanding Installations Fireplace Installations Above the FireplaceThrough the Fireplace Wall Pass-ThroughsHearths Floor Protection for Fireplace Installation Keep the Stove a Safe Distance From Surrounding MaterialsClearances Summary of Clearances Assembly Set Up Your StoveInstall Stove Legs Install the Bottom Heat ShieldInstall the Optional Ash Door Heat Shield Adjust the Leg LevellersFan Kit Installation Reverse the Flue Collar If necessaryOperation Single Air Control Regulates Heat Output and Burn TimeDamper Directs Air Flow Within the Stove Two Ways to Add FuelInfra-Red Reflective Glass Panels For Clear Fire Viewing Andirons Help Protect the GlassBurn Only High-Quality Wood Surface Thermometer is a Valuable Guide to OperationUse the Air Control Settings that Work Best for You Defiant Control SettingsConditioning Your Stove Starting and Maintaining a Wood FireRefuel While the Embers Are Still Hot Add larger pieces of wood as the fire begins to burnAsh Disposal Draft Management Steel ChimneyIndoor/Outdoor Location Flue SizingDraft Testing Single VentingCreosote FuelMaintenance Adjust the Damper as Needed How to Adjust the Door LatchesTighten the Damper Handle as Needed Replace the Stove Gaskets as NeededChimney System All Gasketed Construction GasketsMaintenance Schedule Chimney ConnectorStove Defiant Woodburning Stove Defiant Woodburning Stove Model 1610CE Shell Enamel Parts Defiant Model 1610CE CFM Corporation

1610CE specifications

The Vermont Casting 1610CE is a remarkable addition to the world of wood stoves, known for its combination of efficiency, durability, and classic design. As a proud product of Vermont Castings, this model highlights the brand's dedication to high-quality craftsmanship and innovative technology.

One of the standout features of the Vermont Casting 1610CE is its construction. Made from solid cast iron, the stove not only adds an aesthetic appeal with its traditional styling but also ensures longevity and optimal heat retention. The cast iron construction allows for an even distribution of heat throughout the room, creating a comfortable environment during cold weather.

The 1610CE incorporates advanced heating technology with its efficient wood-burning capabilities. This model is designed to meet the strict EPA standards, ensuring lower emissions while maximizing heat output. The stove features a secondary combustion system that effectively burns off excess gases and particulates, leading to cleaner combustion and improved efficiency. As a result, users can enjoy longer burn times and reduced fuel consumption, making this an eco-friendly choice.

Additionally, the Vermont Casting 1610CE boasts a large firebox that can accommodate logs up to 18 inches long. This generous size allows for extended burn cycles, enabling users to enjoy a cozy fire without the need for frequent refueling. The firebox is also equipped with a ceramic glass door, allowing users to view the enchanting flames while providing an efficient seal when closed.

The features continue with an easy-to-use air control system that allows for simple adjustments to the burn rate and heat output. This level of control enables homeowners to maintain their desired temperature with ease. The stove also comes with a built-in ash pan, making cleanup and maintenance hassle-free.

In terms of aesthetics, the Vermont Casting 1610CE is available in a range of finishes, allowing homeowners to choose an option that best complements their home décor. The timeless design ensures it can seamlessly blend into both modern and traditional interiors alike.

In conclusion, the Vermont Casting 1610CE presents a fine balance of traditional craftsmanship and modern technology. With its solid construction, efficient heating capabilities, generous firebox size, and user-friendly features, it stands out as a reliable choice for anyone looking to invest in a high-quality wood stove that combines both form and function.
Top Page Image Contents