Vermont Casting 1610CE installation instructions Ash Disposal

Page 18

Defiant 1610CE Non-Catalytic Woodburning Stove

operating temperature quickly. Use this sequence as a guide to successful refueling:

NOTE: Door handles can be hot. A glove has been included with your stove. We recommend using this glove whenever operating door or damper controls and especially when operating the top griddle.

1.Open the damper.

2.De-ash the stove as described above. Open the ashdoor and check the level of ash in the ash pan. Empty the pan if necessary and replace it in the stove. Close the ash door.

3.Open the griddle, load the wood (smaller pieces first), and close the griddle.

4.Close the damper.

5.When the surface temperature reaches 230° C (450° F), adjust the air control for the amount of heat you desire.

NOTE: If the remaining charcoal bed is relatively thick (51-76 mm/2-3”) and if your fuel is well seasoned, it is possible to add fresh fuel (smaller pieces first), close the door and damper, and reset the primary air control for the desired heat output within five minutes.

CAUTION: The Defiant will be hot while in opera- tion. Keep children, clothing and furniture away. Contact may cause skin burns.

DO NOT OVERFIRE THIS HEATER. Overfiring may cause a house fire, or can result in permanent damage to the stove. If any part of the Defiant glows, you are overfiring.

Ash Disposal

Routine ash removal is important for ease of maintenance, and is important for the stove’s durability. Remove ash be- fore it reaches the top of the ash pan. Check the level at least once a day. Every few days, clear any ash from the outer edges of the firebox. Most of the ash will fall through the grate. Slice or stir the ash with a shovel or poker so that it falls through the grate slots.

IMPORTANT: Check the level of ash in the ash pan before reloading the stove. If the ash level is close to the top edge of the pan, empty the pan according to this procedure:

Open the damper.

Open the griddle or front doors, and use a shovel or poker to stir excess ash through the ash slots in the grate down into the ash pan.

Close the griddle or doors, and unlatch the ash door. (Fig. 34) It will pivot, swinging the ash pan out of the stove.

Slide the cover onto the pan, making sure it is securely closed. (Fig. 35)

Remove the ash pan, making sure to keep it level.

To keep the cover from sliding off and to keep ash from falling on the floor, do not tilt the ash pan forward.

Open

Close

ST545

Fig. 34 Turn the ashdoor handle clockwise to open and coun- terclockwise to close.

If the stove is in operation, close the ash door while dis- posing of the ash. You may need to lift the latch end of the door slightly to align the latch with the mating part on the stove bottom.

Properly dispose of the ash in a metal container with a tight-fitting lid. Store the container outdoors away from all combustible material.

Return the ash pan to its original position in the stove, and close and latch the ash door. (Fig. 35)

Do not operate the stove with the ash door open. This will result in over-firing, and could cause damage to the

stove, void the warranty, or even lead to a house fire. Empty the ash pan regularly, typically every one to three days. The frequency will vary depending on how you oper- ate your Defiant: ash will accumulate faster at higher heat outputs.

Remove ash frequently and place it outdoors in a metal container with a tight-fitting lid. Place the closed container of ash on a noncombustible floor or on the ground, well away from all combustible materials, pending final dispos- al. If the ash is disposed of by burial in soil or otherwise locally dispersed, it should be kept in the closed container until all cinders have thoroughly cooled.

You can use wood ash as a garden fertilizer.

CAUTION: Never use your household or shop vacuum cleaner to remove ash from the stove; always remove and dispose of the ash properly.

ST566

Fig. 35 Be sure the cover is securely attached before remov- ing the ash pan.

18

30003846

Image 18
Contents Defiant Welcome Save These Instructions for Future ReferenceTable of Contents Story of the DefiantSpecifications Defiant, Model 1610CEInstallation Outside AirChimney Height Masonry Chimneys Chimney Connector GuidelinesWhat Kind of Chimney to Use Prefabricated ChimneysSingle-wall Chimney Connectors Securing the Single-wall Connector to a Masonry ChimneyFreestanding Installations Fireplace Installations Above the FireplaceThrough the Fireplace Wall Pass-ThroughsHearths Floor Protection for Fireplace Installation Keep the Stove a Safe Distance From Surrounding MaterialsClearances Summary of Clearances Install Stove Legs AssemblySet Up Your Stove Install the Bottom Heat ShieldFan Kit Installation Install the Optional Ash Door Heat ShieldAdjust the Leg Levellers Reverse the Flue Collar If necessaryDamper Directs Air Flow Within the Stove OperationSingle Air Control Regulates Heat Output and Burn Time Two Ways to Add FuelBurn Only High-Quality Wood Infra-Red Reflective Glass Panels For Clear Fire ViewingAndirons Help Protect the Glass Surface Thermometer is a Valuable Guide to OperationConditioning Your Stove Use the Air Control Settings that Work Best for YouDefiant Control Settings Starting and Maintaining a Wood FireRefuel While the Embers Are Still Hot Add larger pieces of wood as the fire begins to burnAsh Disposal Indoor/Outdoor Location Draft ManagementSteel Chimney Flue SizingCreosote Draft TestingSingle Venting FuelMaintenance Tighten the Damper Handle as Needed Adjust the Damper as NeededHow to Adjust the Door Latches Replace the Stove Gaskets as NeededChimney System All Gasketed Construction GasketsMaintenance Schedule Chimney ConnectorStove Defiant Woodburning Stove Defiant Woodburning Stove Model 1610CE Shell Enamel Parts Defiant Model 1610CE CFM Corporation

1610CE specifications

The Vermont Casting 1610CE is a remarkable addition to the world of wood stoves, known for its combination of efficiency, durability, and classic design. As a proud product of Vermont Castings, this model highlights the brand's dedication to high-quality craftsmanship and innovative technology.

One of the standout features of the Vermont Casting 1610CE is its construction. Made from solid cast iron, the stove not only adds an aesthetic appeal with its traditional styling but also ensures longevity and optimal heat retention. The cast iron construction allows for an even distribution of heat throughout the room, creating a comfortable environment during cold weather.

The 1610CE incorporates advanced heating technology with its efficient wood-burning capabilities. This model is designed to meet the strict EPA standards, ensuring lower emissions while maximizing heat output. The stove features a secondary combustion system that effectively burns off excess gases and particulates, leading to cleaner combustion and improved efficiency. As a result, users can enjoy longer burn times and reduced fuel consumption, making this an eco-friendly choice.

Additionally, the Vermont Casting 1610CE boasts a large firebox that can accommodate logs up to 18 inches long. This generous size allows for extended burn cycles, enabling users to enjoy a cozy fire without the need for frequent refueling. The firebox is also equipped with a ceramic glass door, allowing users to view the enchanting flames while providing an efficient seal when closed.

The features continue with an easy-to-use air control system that allows for simple adjustments to the burn rate and heat output. This level of control enables homeowners to maintain their desired temperature with ease. The stove also comes with a built-in ash pan, making cleanup and maintenance hassle-free.

In terms of aesthetics, the Vermont Casting 1610CE is available in a range of finishes, allowing homeowners to choose an option that best complements their home décor. The timeless design ensures it can seamlessly blend into both modern and traditional interiors alike.

In conclusion, the Vermont Casting 1610CE presents a fine balance of traditional craftsmanship and modern technology. With its solid construction, efficient heating capabilities, generous firebox size, and user-friendly features, it stands out as a reliable choice for anyone looking to invest in a high-quality wood stove that combines both form and function.