Teledyne LLD dimensions 3B-2. Model LLG Standing Pilot, What to do if YOU Smell GAS

Page 16
PILOT BURNER

Page 16

3B-2. Model LLG (Standing Pilot)

FOR YOUR SAFETY READ BEFORE OPERATING

WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

A.This appliance has a pilot which must be lighted by a push button sparker. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING, smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

•If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don't try to repair it. Call a qualified service technician. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

OPERATING INSTRUCTIONS

1.STOP! Read the safety information above.

2.Set the thermostat to lowest setting and turn appliance ON/OFF switch to "OFF".

3.Turn gas control knob clockwise until it stops at "OFF" position.

4.Wait five (5) minutes to clear out any gas. If you then smell gas, STOP! Follow "B" in the safety information above. If you don't smell

gas go to the next step.

5. To find pilot—follow gas line from gas valve to pilot

location.

6. Turn knob on gas valve

counterclockwise to

"PILOT" then push control

knob all the way and hold down. TO VALVE

7.Push the button of the sparker, repeating until confirming that pilot lights, by observing reflection on burner tray mirror.

8.Continue to hold the control knob down for about one (1) minute after the pilot is lit. If it goes out, repeat steps 3 through 8.

•If knob does not pop out when released, stop and immediately call your service technician or gas supplier.

•If the pilot will not stay lit after several tries, turn the gas control knob to "OFF" and call your service technician or gas supplier.

9.Turn gas control knob counterclockwise to "ON".

10.After replacing control compartment access panel, set thermostat to desired setting and turn appliance ON/OFF switch to "ON". Valve has built-in delay before coming on.

11.If the appliance will not operate, check that the filter pump is on, that the filter is clean and water is flowing to the pool. Otherwise, follow the instructions "To Turn Off Gas To Appliance" and call your service technician or gas supplier.

TO TURN OFF GAS TO APPLIANCE

1.Set the thermostat to lowest setting and turn appliance ON/OFF switch to "OFF".

2.Turn gas control knob clockwise until it stops at "PILOT". Then press down slightly on

knob while turning clockwise to "OFF". Do not force.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Section 1A. Introduction1C. Warranty 2B. Field Assembly1B. Description 1D. Technical Assistance2C-2. Outdoor Installation 2C-1. Installation Information2C. Site Location 2C-3. Flooring Typical Installation 2D. Combustion and Ventilation Air SupplyUnited States Canada2E. Gas Supply and Piping 2E-1. General Instructions2F. Electrical Wiring 2E-2. Special Precautions for Propane Gas LLG Only2F-2. Auxiliary Time Clock Wiring LLD or LLG 2F-1. General Information LLD OnlyLLD Connection/Schematic Wiring Diagram LLG Connection/Schematic Wiring Diagram 2G-1. Flange Installation 2G. Water Flow System2G-2. Reversible Water Connections Heat exchanger reversalTemperature sensing bulb 2G-3. Check Valve Installation 2G-6. Adjusting the Pressure Switch2G-4. Chlorinators, Ozone Generators Sanitizing Chemicals 2G-5. Pressure Relief Valve2G-8. Temperature Rise 2G-7. Automatic Flow Control Valve3B. Lighting and Shutdown Procedures 2G-9. Adjusting the Manual Bypass Valve3A. General Information 3B-1. Model LLD see 3B-2. Model LLG see3B-1. Model LLD Direct Ignition Do not try to light any appliance3B-2. Model LLG Standing Pilot What to do if YOU Smell GAS3C. Setting the Temperature Control 3D. Seasonal Care3D-1. Spring and Fall Operation 3D-2. Winterizing3E. Water Chemistry 3F. Spa/Hot Tub Safety Rules3D-3. Spring Start-up 3H. Periodic Inspection 3G. Swimming Pool Energy Saving Tips3H-1. Owner Inspection 4A. General Information 4B. Parts List3H-2. Professional Inspection LLD Direct Ignition **-LLG Standing Pilot See For detail Detailed view of Heat Exchanger Assembly D Detailed view of LLG Burner Tray Assembly EDetailed view of LLD Burner Tray Assembly E Page Laars Lite Limited Warranty

LLD, LLG specifications

Teledyne LLG, LLD is a prominent player in the field of advanced measurement and inspection systems. Based in the heart of the technology sector, Teledyne LLG combines cutting-edge engineering with innovative technologies to deliver high-performance solutions, particularly in the realms of optics and imaging.

One of the main features of Teledyne LLG is its commitment to precision. The company specializes in providing high-resolution sensors and imaging systems that cater to a variety of applications, including scientific research, industrial inspection, and aerospace. These sensors are designed to meet stringent performance standards, ensuring reliable data acquisition and analysis across diverse environments.

The technologies employed by Teledyne LLG are at the forefront of optical engineering. Their systems often utilize sophisticated algorithms and advanced signal processing techniques to enhance image quality and measurement accuracy. Innovations such as spectral imaging enable users to capture and analyze information beyond the visible spectrum, offering valuable insights for applications in fields like remote sensing and environmental monitoring.

Another characteristic that sets Teledyne LLG apart is its focus on integration and customization. Understanding that each application has unique requirements, the company offers tailored solutions that cater to specific needs. This flexibility allows clients from various sectors to leverage Teledyne LLG's technologies effectively, optimizing their operational workflows.

Teledyne LLG’s commitment to research and development ensures that its products continually evolve. The company invests significantly in exploring new materials, sensor designs, and imaging techniques. This proactive approach not only keeps them ahead of market trends but also ensures that their customers benefit from the latest technological advancements.

Moreover, Teledyne LLG places a strong emphasis on sustainability and efficiency. By developing systems that require less energy and produce less waste, the company not only addresses environmental concerns but also helps clients reduce operational costs.

In summary, Teledyne LLG, LLD stands out in the field of measurement and inspection through its precision, innovative technology, customized solutions, and commitment to sustainability. As industries continue to seek advanced solutions to meet modern challenges, Teledyne LLG remains dedicated to providing high-quality imaging and measurement systems that drive progress and innovation across multiple fields. With its strong focus on R&D and customer-centric solutions, Teledyne LLG is well-positioned to lead the future of optical technology and sensor development.
Top Page Image Contents