Vanguard Heating GVB35P, GVB50P installation manual OWNER’S Operation and Installation Manual

Page 1

®

VENTED PROPANE

GAS HEATERS

OWNER’S OPERATION AND INSTALLATION MANUAL

Models: GVB35P and GVB50P

WARNING: If the information in this manual

WARNING: Improper installation,

is not followed exactly, a fire or explosion

adjustment, alteration, service, or

may result causing property damage, per-

maintenance can cause property

sonal injury, or loss of life.

damage, personal injury or loss of

 

FOR YOUR SAFETY

life. Refer to this manual for cor-

— Do not store or use gasoline or other

rect installation and operational

flammable vapors and liquids in the

procedures. For assistance or

vicinity of this or any other appliance.

additional information consult a

— WHAT TO DO IF YOU SMELL GAS

qualified installer, service agency,

 

• Do not try to light any appliance.

or the gas supplier.

•Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your gas supplier from

a neighbor’s phone. Follow the gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire department.

®

— Installation and service must be per- formed by a qualified installer, service agency, or the gas supplier.

Save this manual for future reference.

Page 1 Page 2
Image 1
Page 1 Page 2
Contents For Your Safety OWNER’S Operation and Installation ManualWhat to do if YOU Smell GAS Contents Information SafetyElectrical shock, and carbon monoxide poisoning Carbon monoxide poisoning may lead to deathSafety Information Product Identification Installing Heater FeaturesUnpacking ProductLocating Heater Installing HeaterVenting Heater Do not vent heater in any of the following ways see Figure Venting HeaterVenting Heater Proper Size Vent Connecting to GAS Supply InstallingQualified service person must connect heater to gas Supply. Follow all local codesGas Connection Checking GAS Connections Pressure Testing Gas Supply Piping SystemRemoving Lower Front Access Panel Installing Glass PanelInserting Glass Panels Fresh AIR for Combustion and Ventilation Ventilation CombustionDetermining FRESH-AIR Flow for Heater Location Draft Hood Spillage TestVentilation Air from Outdoors Fresh AIR for17 to make sure fresh air ventilation is adequate Confined area has an air volume of less than 50 cubicOperating Heater For Your Safety Read Before LightingLighting Instructions Viewing Pilot To Turn OFF GAS to Appliance Manual Lighting ProcedureShutting Off Heater Shutting Off Burner Only pilot stays litPilot Flame Pattern Inspecting Pilot and Burner FlameBurner Flame Pattern Correct Burner Flame Pattern Cleaning and Maintenance Son should service and repair heater and venting system Trouble ShootingTrouble Cleaning and MainteTROUBLE- Shooting Shut off gas supply If you smell gasDo not try to light any appliance Gas leak. See WarningRemoving Control Valve and Burner Tube Service ProceduresRemoving Burner Orifice Location 35,000 BTU/Hr Burner Shown Changing Burner OrificeService Hints Technical ServiceSpecifications 35,000 BTU/HrParts Under Warranty Ordering ReplacementParts Not Under Warranty PartsValve GA5010 AccessoriesIllustrated Parts List QTY Cabinet Assembly 100354 International Warranty Information

GVB50P, GVB35P specifications

The Vanguard Heating GVB35P and GVB50P models represent a significant advancement in home heating technology, designed to cater to the needs of residential spaces with varying heating demands. These gas-fired boilers not only ensure optimal warmth but also focus on energy efficiency and user-friendly operation.

One of the main features of the GVB35P and GVB50P is their impressive heating capacity. The GVB35P is suitable for smaller homes or apartments, with a heating output of around 35,000 BTU, while the GVB50P is designed for larger spaces, offering an impressive 50,000 BTU. This versatility allows homeowners to select the most appropriate model for their specific requirements, ensuring efficient heating without unnecessary energy consumption.

Both models incorporate advanced condensing technology, which significantly enhances their efficiency ratings. By capturing and reusing heat that typically escapes through the flue in traditional boilers, the GVB35P and GVB50P achieve high Annual Fuel Utilization Efficiency (AFUE) ratings. This not only reduces the overall energy bill but also contributes to a lower carbon footprint, making these models an environmentally conscious choice.

The construction of the GVB35P and GVB50P features robust, durable materials aimed at maximizing longevity and reliability. The heat exchangers are designed to withstand high temperatures and pressures, ensuring safety and durability. Additionally, these models are equipped with a modulating gas burner, which allows for precise temperature control and minimizes energy wastage during operation.

User convenience is further enhanced by the inclusion of a built-in digital control system. This allows homeowners to easily adjust the heating settings remotely, ensuring homes are warm upon arrival without requiring constant manual input. Moreover, the low maintenance requirements of these models make them appealing to busy homeowners, as regular service intervals are reduced.

In summary, the Vanguard Heating GVB35P and GVB50P models combine advanced technology, high efficiency, and user-friendly features to deliver exceptional heating performance. Their durable construction, energy-saving capabilities, and modern controls make them an excellent choice for homeowners looking to enhance comfort while minimizing environmental impact. Whether for a small apartment or a larger home, these boilers stand out as a reliable heating solution.
Top Page Image Contents