Vanguard Heating VP2000BB, VGP30B specs

OPERATING HEATER

Continued

4.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety information at the top of page 17. If you don’t smell gas, go to the next step.

5.Press in control knob and turn counterclockwise C-clockwiseto the PILOT position. Keep control knob pressed in for five (5) seconds (see Figure 16, page 17).

Note: You may be running this heater for the first time after hooking up to gas supply. If so, the control knob may need to be pressed in for 30 seconds. This will allow air to bleed from the gas system.

•If control knob does not pop up when released, contact a qualified service person or gas supplier for repairs.

6.With control knob pressed in, push down and release ignitor button. This will light pilot. The pilot is attached to the front of burner. The burner and pilot are located behind the heat shield. If needed, keep pressing ignitor button until pilot lights.

Note: If pilot does not stay lit, refer to Troubleshooting, pages 21 through

24.Also contact a qualified service person or gas supplier for repairs. Until repairs are made, light pilot with match. To light pilot with match, see Manual Lighting Procedure, page 19.

	Ignitor Electrode
Thermocouple	Pilot Burner
	Pilot Burner

Pilot Figure 17 - PilotGRH/OV 007G

7.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob.

Note: If pilot goes out, repeat steps 3 through 7.

8.Turn control knob counterclockwise C-clockwiseto the LOW position. The main burner should light. Set control knob to any heat level between HIGH and LOW. To turn control knob from LOW to a higher setting, press in the

control knob and turn counterclockwise C-clockwise .

Note: Both HIGH and LOW are locked positions. You must press in control knob before turning it from these positions.

CAUTION

Do not try to adjust heating levels by using the manual shutoff valve.

Continued

100100

VGP30B, VP2000BB specifications

The Vanguard Heating VGP30B and VP2000BB are remarkable units designed to provide efficient, reliable heating solutions for various environments. With a focus on performance, durability, and user convenience, both models are engineered to meet a range of heating needs for residential and commercial applications.

The Vanguard VGP30B features advanced combustion technology that ensures optimal fuel efficiency and reduced emissions. This model operates on propane or natural gas, which allows for flexible installation options. The heat output ranges from 30,000 to 100,000 BTU, making it suitable for larger spaces while still maintaining a compact design. One of its standout features is the intuitive control system, which includes a programmable thermostat for easy temperature regulation and energy management.

Additionally, the VGP30B is built with a durable steel construction that enhances its longevity and performance. This model includes a built-in safety shutoff mechanism that provides peace of mind by ensuring the heater operates safely. The easy-access design not only simplifies maintenance but also minimizes downtime, making it a favorite among professional installers.

On the other hand, the VP2000BB is specifically designed for larger areas, with an impressive heating capacity of up to 200,000 BTU. This model is equipped with multiple heat output settings, allowing users to customize warmth according to their specific needs. The VP2000BB uses state-of-the-art infrared heating technology that effectively warms objects and surfaces in the room rather than merely heating the air, resulting in a comfortable and consistent heat distribution.

A key benefit of the VP2000BB is its energy-efficient design, which helps reduce heating costs over time. Its built-in fan system enhances heat circulation, ensuring that even the farthest corners of an area receive adequate warmth. The robust construction and weather-resistant materials also make this unit ideal for outdoor applications, such as workshops or temporary outdoor gatherings.

In summary, both the Vanguard VGP30B and VP2000BB encapsulate the brand's commitment to quality, energy efficiency, and user-friendly features. Whether for residential or industrial use, these heaters provide reliable performance that can be tailored to meet individual heating requirements. With their advanced technologies and durable design, they are excellent choices for ensuring a warm and comfortable environment.