Operation

ON/OFF

Press to switch the unit on or to switch off. A buzzer will beep, and the LCD will display 12:00 o’clock as default.

Setting the clock

Press the -button for 3 seconds to set the clock. The 2 left digits of the 4 digits on the LCD-display will flash. Press or to adjust the hour. Press momentarily, the 2 right digits of the 4 digits will flash. Press or to adjust the minutes of the clock. Press the -button for 3 seconds again to activate the clock.

Setting the temperature

If you want to change the set temperature press the or -button. The 2 digit display will indicate the set temperature.

Note: Reaching the set temperature depends on the room and outdoor climatic conditions.

Mode

Pressing the -button to switch the operating mode between 'cooling' and 'fan only'.

Fan speed

If you prefer a constant fan speed instead of the auto fan speed, press the -button successively; the fan speed icon on the LCD-display will rotate accordingly.

• Fast	- for the turbo speed
• Normal - for the medium speed
• Slow	- for the slow speed
• Auto	- alternating fast and slow speed

Timer

For all of the following TIMER programming, proceed firstly with these standard steps:

•Press the -button briefly; the 2 left digits of the 4 digits on the LCD display are flashing.

•Press or to adjust the hour.

•Press the -button briefly again, the 2 right digits of the 4 digits are flashing.

•Press or to adjust the minutes of the clock in intervals of 5 minutes. The timer is set. After 10 seconds the time display returns.

The timer settings are visualised along the bottom of
the display.	Timer setting example