KT898
Fig. 7 Tranquility stones’ flame appearance.
12.Reinstall the glass frame.
13.Turn the gas supply ON and light the pilot. Turn valve to the “ON” position.
14.Reinstall valve cover.
15.Turn the electric power ON.
16.Turn fireplace on following lighting instructions in Homeowner’s Manual. Compare flame height to that shown in Figure 8. Check to see the flames are not touching the stones. If the flames impinge on the stones, turn the unit off, allow to cool and follow Steps 1 to 3. Adjust the stones and follow Steps 12 to 14.
Tranquility Stone installation complete.
20012693 | 5 |