LDVR Series Direct Vent Gas Fireplace
Installation of Logs, Lava Rock & Ember Material
The logs are fragile and should be handled with care. Keep the packaging material out of the reach of children and dispose of the material in a safe manner.
The individual logs can be easily identified by the numbers cast on the underside of each log.
Log Identification Chart
Location | 33LDVR | 36LDVR | 39LDVR | 43LDVR |
Front Left | A43 | B136 | BC15 | BD16 |
Front Right | B137 | BC16 | BD17 | |
Front Center | B138 | B138 | B138 | |
Rear | B135 | BC14 | BD15 | |
Rear Left | A41 | |||
Rear Right | A42 | |||
Top Center | A44 | BD18 |
Log Installation
1.Remove the top louvre assembly.
2.Open the bottom louvre.
3.Remove the window frame assembly.
4.Remove log box from inside firebox.
5.Unpack the logs from packaging and remove each log from its wrapping material. Set aside the ember and the lava rock bags.
As with all plastic bags - these are not toys and should be kept away from children and infants.
33LDVR
1.Place rear log left (A41) on rear bracket (ensure the notch on the left end locates against the bend up on the left side of rear bracket.)
2.Place rear log right (A42) on rear bracket (ensure the notch on the right end locates against the bend up on the right side of rear bracket) and just rest the cut out from front log onto the front support.
3.Place front log left (A43). Use the logʼs bottom hole to locate it onto rear log left (A41) and just rest bot- tom cut out log onto the front support.
4.Place top log center (A44). Use the logʼs bottom hole to locate it onto the knob on the rear log right (A42) and the top log center rest onto rear log left.
5.Place ember material on top of burner. Scatter the ember material over the tiles on the front area of the burner housing. (Fig. 48) Do not pack the ember material. Separate it when unpacked and keep it in a fluffy and loose condition for a more realistic ember effect.
6.Scatter the lava rock material around the firebox base.
Do not place any of the lava rock material on the burner housing assembly.
Rear Left | Top Center | Rear Right |
(A41) | (A44) | |
| (A42) | |
|
|
Front Left |
|
(A43) | LG382 |
Fig. 41 Correct log placement for 33LDVR.
36LDVR
1.Place rear log (B135) on rear bracket (ensure log is seated properly to the bracket and located to the two pins), so it will not move from side to side and is firmly positioned on the bracket.
2.Place front left log (B136). Use the logʼs bottom hole to locate it onto the front support and just rest on top of the rear log.
3.Place front right log (B137). Use the logʼs bottom hole to locate it onto the front support and the top hole to the knob onto the rear log.
4.Place front center log (B138) on top of the two small shelves at the front log support and between the left and right logs.
5.Place ember material on top of burner. Scatter the ember material over the tiles on the front area of the burner housing. (Fig. 49) Do not pack the ember material. Separate it when unpacked and keep it in a fluffy and loose condition for a more realistic ember effect.
6.Scatter the lava rock material around the firebox base.
Do not place any of the lava rock material on the burner housing assembly.
10007317 | 23 |