Jotul GF3 DVII manual Fuel Conversion, Gas Conversion Procedure, Tools required, Kit Contents

Page 14

Fuel Conversion

The Allagash gas stove is shipped from the factory equipped as a NATURAL GAS unit; However, the stove is shipped with the necessary gas conversion kit to convert the stove to burn propane gas. The kit contains all the necessary components needed to complete the conversion and ensure safe operation, including Conversion Notice labels that must be affixed to the stove and stove Rating Plate.

WARNING:

THE CONVERSION KIT IS TO BE INSTALLED BY AN AUTHORIZED JØTUL SERVICE TECH- NICIAN IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTION AND ALL CODES AND REQUIREMENTS OF THE AU- THORITY HAVING JURISDICTION. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE. THE QUALIFIED AGENCY PER- FORMING THIS WORK ASSUMES RESPONSI- BILITY FOR THIS CONVERSION.

Tools required:

• 1/4” Nut driver

• 7/16” open end wrench

• 1/2” open end wrench

• Torx T-20 or slot head

 

screwdriver.

Kit Contents:

 

1, Regulator Tower labeled for propane 3, Regulator Tower screws

1, Burner Orifice (1.5 mm for LPG, #38 for NG) 1, Pilot Orifice ( #30 for LPG, #51 for NG)

1, 4 mm Hex Key

Label A - to be completed and applied to the back of the stove.

Label B - apply to the stove Rating Plate.

IMPORTANT: SHUT OFF THE GAS SUPPLY AT THE MAIN SUPPLY VALVE BEFORE BEGINNING THE CONVERSION.

If a blower is installed, be sure to disconnect the power cord before proceeding with this conversion.

IN CANADA: THE CONVERSION SHALL BE CARRIED OUT IN ACCORDANCE WITH THE REQUIREMENTS OF THE PROVINCIAL AUTHORITIES HAVING JURISDIC- TION AND IN ACCORDANCE WITH THE REQUIRE- MENTS OF THE CAN1-B149.1 AND .2 INSTALLATION CODE.

Gas Conversion Procedure

1.Turn off gas supply to the stove.

2.Open the front doors.

3.Remove the stove top plate.

4.Release the glass clips atop the stove and slowly lift glass panel up and off of the firebox.

5.Carefully remove the logs and set out of the way.

6.Remove burner tube: Lift out the log support plate. Using a ¼” nut driver remove the two screws secur- ing the burner tube (17, pg. 22) to the stove bottom. Lift out the burner tube.

7.Change the main burner orifice (32, pg 22 and Fig. 12). Using a ½” open end wrench, remove the burner orifice and replace with the appropriate orifice, supplied in the kit.

Natural gas - #38 Propane - 1.5 mm DMS

8.Adjust the air shutter on the burner tube to allow for the proper mixing of air and gas. See Fig. 12.

Natural - Three-quarters OPEN. Propane - FULL OPEN

NOTE: The Air Shutter should never be set LESS than 1/8” open.

Burner Tube

Air

 

 

Shutter

Burner Orifice

Figure 12. Burner Orifice and Air Shutter. Shutter is shown in the fully open position.

12

Image 14
Contents Jøtul GF3 Dvii Allagash Direct Vent Gas Heater Welcome to Jøtul Table of Contents Specifications Input RatesGlass Front StandardsGeneral Information Electrical Hazard Safety InformationLocation Hearth RequirementsCorner Installation Alcove InstallationParallel Installation Clearance RequirementsVenting Requirements Simpson Dura-Vent GS Amerivent DirectHorizontal Venting Requirements Restrictor SlidersCo-linear Vent Installation These guidelines must be followedMobile Home Installation Simpson Dura-Vent Chimney Conversion KitVent Termination Window FeetVent Terminal Clearances = Clearance to inside corner 6 inches 16 cm minFuel Conversion Gas Conversion ProcedureKit Contents Tools requiredGAS Leaks Leak test Gas ConnectionGas Pressure Derating Procedure High Altitude AdjustmentHigh Altitude Orifice Chart U.SAir Shutter & Flame Picture Adjustment Log Set InstallationBlower Kit Contents Optional Blower InstallationConnect the Blower Wiring Harness Attach the BlowerOptional Wall Thermostat or Remote Control Remote ControlSystem Check Correct Pilot FlameOperation MaintenanceGeneral Cleaning Gasket InspectionDate of Purchase Name of Installer List Illustrated PartsJøtul GF3 Dvii Allagash Parts Hardware ListPage Lighting Instructions Control ValveJøtul ASA Jøtul North America

GF3 DVII specifications

The Jotul GF3 DVII is a stunning gas stove that combines traditional craftsmanship with modern technology, making it a favorite among homeowners seeking both efficiency and aesthetic charm. This unit reflects Jotul's Norwegian heritage, which has a longstanding reputation for producing high-quality, durable heating products. With an inviting design and reliable performance, the GF3 DVII has become a popular choice for those looking to enhance their living spaces.

One of the standout features of the Jotul GF3 DVII is its captivating design. The stove boasts a classic cast iron body that not only provides exceptional heat retention but also adds a touch of timeless beauty to any room. The large, clear glass door offers an impressive view of the flames, creating a warm ambiance that can transform a cold evening into a cozy gathering. Furthermore, it is available in various finishes, such as matte black and green, allowing homeowners to choose a look that complements their interior decor.

In addition to its aesthetic appeal, the Jotul GF3 DVII incorporates advanced technologies for enhanced performance. The stove is equipped with a direct vent system that allows for efficient gas combustion while minimizing the release of exhaust gases into the home. This system ensures a constant supply of fresh air for combustion, improving the stove's efficiency and safety. The unit is capable of producing up to 20,000 BTUs, providing ample warmth for medium to large-sized spaces.

The GF3 DVII offers user-friendly controls, allowing for easy operation and adjustment of flame height and heat output with minimal effort. This feature ensures that users can quickly and effectively create the desired atmosphere in their home. Additionally, the stove can be operated with a remote control, providing convenience for adjusting settings without needing to leave the comfort of a chair.

Another key characteristic of the Jotul GF3 DVII is its adaptability to various installation configurations, including both natural gas and propane options. This flexibility makes it an excellent choice for a wide range of homes and preferences. Coupled with its impressive efficiency ratings, the GF3 DVII stands out as an environmentally conscious choice, producing lower emissions than traditional wood-burning stoves.

In summary, the Jotul GF3 DVII gas stove merges classic design with modern functionality, offering homeowners an efficient and aesthetically pleasing heating solution. With its advanced technologies, versatility, and stunning craftsmanship, the GF3 DVII is indeed a remarkable addition to any living space.