Jotul GF3 DVII manual High Altitude Adjustment, High Altitude Orifice Chart, U.S, Canada

Page 17

ALWAYS TEST PRESSURES WITH VALVE CONTROL KNOB SET ON HIGH.

The appliance must be isolated from the gas supply line by closing its individual manual gas shutoff valve (gas cock) during any pressure testing of the gas supply piping system that is equal to or exceeds pressures of 1/2 psig. (3.5 kPa).

High Altitude Orifice Chart

Elevation

Fuel

Orifice

Part No.

 

Size

 

 

 

 

0 - 2000 ft.

Natural Gas

#38

129130

 

(0 - 610 m)

Propane

1.5 mm

129146

 

 

 

 

 

 

2001 - 4500 ft.

Natural Gas

#38

Do Not Derate

(611 - 1370 m)

Propane

#54

754517P

 

 

 

 

 

High Altitude Adjustment

Installation at high altitude locations (above 2500'), makes it necessary to compensate for the thinner air (less volume of air per cubic foot). Higher altitudes affect the atmospheric pressure and heat value of some gaseous fuels. The Allagash DVII requires adjustment for Propane fuel at high altitude, but not for Natural gas.

In the U.S.

THE DERATING KIT MUST BE INSTALLED BY AN AUTHORIZED SERVICE TECHNICIAN IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS AND ALL CODES AND REQUIREMENTS OF THE AUTHORITY HAVING JURISDICTION. THE INFORMATION STICKER MUST BE FILLED OUT BY THE INSTALLER AND AD- HERED TO THE APPLIANCE AT THE TIME OF THE CONVERSION. THE QUALIFIED SERVICE AGENCY PERFORMING THIS WORK ASSUMES RESPONSIBILITY FOR THIS DERATING.

For installations from 610 - 1370 meters (2000- 4500 ft.) the orifice size for natural gas is #38 and for propane gas #54.

SEE THE HIGH ALTITUDE ORIFICE CHART ON THIS PAGE.

See the stove Rating Plate for additional informa- tion. For high altitude installations consult the local gas distributor or the authority having jurisdiction for proper rating methods. If the installer must convert the unit to adjust for varying altitudes, the informa- tion sticker must be filled out by the installer and applied to the appliance at the time of the conversion.

In Canada:

This unit has been tested for installation at high altitudes in accordance with Canadian test standard CAN/CGA-2.17.

THE DERATING SHALL BE CARRIED OUT IN ACCOR- DANCE WITH THE REQUIREMENTS OF THE PROVIN- CIAL AUTHORITIES HAVING JURISDICTION AND IN ACCORDANCE WITH THE REQUIREMENTS OF THE CAN1-B-149.1 AND .2 INSTALLATION CODE.

Derating Procedure

To derate this unit, install the appropriate orifice per the High Altitude chart.

1.Remove the two ¼” hex head screw that holds the burner tube/log support to the bottom of the stove.

2.Remove the burner tube/log support to expose the main burner orifice.

3.Remove the orifice and replace with the appropri- ate one from the high altitude kit.

4.Be sure to attach the high altitude conversion sticker provided with the kit to the rating plate on the appliance.

THIS STOVE HAS BEEN CONVERTED FOR USE AT AN ALTITUDE OF: ___________

Orifice Size: __________ Manifold Press. _____

Input Btu/Hr. _________ Fuel Type __________

Date of Conversion ___________

Figure 17. High Altitude Conversion Label.This sticker is included in all high altitude kits and must be applied to the stove when converted for high altitude .

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Jøtul GF3 Dvii Allagash Direct Vent Gas Heater Welcome to Jøtul Table of Contents Input Rates SpecificationsGlass Front StandardsGeneral Information Location Safety InformationElectrical Hazard Hearth RequirementsParallel Installation Alcove InstallationCorner Installation Clearance RequirementsSimpson Dura-Vent GS Amerivent Direct Venting RequirementsRestrictor Sliders Horizontal Venting RequirementsThese guidelines must be followed Co-linear Vent InstallationSimpson Dura-Vent Chimney Conversion Kit Mobile Home InstallationFeet Vent Termination Window= Clearance to inside corner 6 inches 16 cm min Vent Terminal ClearancesKit Contents Gas Conversion ProcedureFuel Conversion Tools requiredGAS Leaks Leak test Gas ConnectionGas Pressure High Altitude Orifice Chart High Altitude AdjustmentDerating Procedure U.SLog Set Installation Air Shutter & Flame Picture AdjustmentConnect the Blower Wiring Harness Optional Blower InstallationBlower Kit Contents Attach the BlowerRemote Control Optional Wall Thermostat or Remote ControlCorrect Pilot Flame System CheckGeneral Cleaning MaintenanceOperation Gasket InspectionDate of Purchase Name of Installer Illustrated Parts ListHardware List Jøtul GF3 Dvii Allagash PartsPage Control Valve Lighting InstructionsJøtul North America Jøtul ASA

GF3 DVII specifications

The Jotul GF3 DVII is a stunning gas stove that combines traditional craftsmanship with modern technology, making it a favorite among homeowners seeking both efficiency and aesthetic charm. This unit reflects Jotul's Norwegian heritage, which has a longstanding reputation for producing high-quality, durable heating products. With an inviting design and reliable performance, the GF3 DVII has become a popular choice for those looking to enhance their living spaces.

One of the standout features of the Jotul GF3 DVII is its captivating design. The stove boasts a classic cast iron body that not only provides exceptional heat retention but also adds a touch of timeless beauty to any room. The large, clear glass door offers an impressive view of the flames, creating a warm ambiance that can transform a cold evening into a cozy gathering. Furthermore, it is available in various finishes, such as matte black and green, allowing homeowners to choose a look that complements their interior decor.

In addition to its aesthetic appeal, the Jotul GF3 DVII incorporates advanced technologies for enhanced performance. The stove is equipped with a direct vent system that allows for efficient gas combustion while minimizing the release of exhaust gases into the home. This system ensures a constant supply of fresh air for combustion, improving the stove's efficiency and safety. The unit is capable of producing up to 20,000 BTUs, providing ample warmth for medium to large-sized spaces.

The GF3 DVII offers user-friendly controls, allowing for easy operation and adjustment of flame height and heat output with minimal effort. This feature ensures that users can quickly and effectively create the desired atmosphere in their home. Additionally, the stove can be operated with a remote control, providing convenience for adjusting settings without needing to leave the comfort of a chair.

Another key characteristic of the Jotul GF3 DVII is its adaptability to various installation configurations, including both natural gas and propane options. This flexibility makes it an excellent choice for a wide range of homes and preferences. Coupled with its impressive efficiency ratings, the GF3 DVII stands out as an environmentally conscious choice, producing lower emissions than traditional wood-burning stoves.

In summary, the Jotul GF3 DVII gas stove merges classic design with modern functionality, offering homeowners an efficient and aesthetically pleasing heating solution. With its advanced technologies, versatility, and stunning craftsmanship, the GF3 DVII is indeed a remarkable addition to any living space.
Top Page Image Contents