Fujitsu R410A operation manual Weekly timer setting, Day of the week setting, Time setting

Page 8

WEEKLY TIMER

Weekly timer setting

1

SU MO TU WE TH FR SA

3 6 9 12 15 18 21

Press the timer mode button to select the weekly timer.

2

Press the SET button for 2 sec- onds or more.

3 • Day of the week setting

1

2

ALL SU MO TU WE TH FR SA

SU MO TU WE TH FR SA

Press the DAY button to select the day of the week, and then press the SET button to confirm the setting.

For ALL, all of the days can be set together when a appears around each day.

3 6 9 12 15 18 21

4 • Time setting

1

2

3

ON-1 OFF-1 ON-2 OFF-2

When the operating time is set, the mark appears.

SU MO TU WE TH FR SA

3 6 9 12 15 18 21

ex. The timer is set for 7:00-18:00.

Press the set time buttons to set the time, and then press the SET button to confirm the setting and proceed to the next ON or OFF time setting. Up to two ON and OFF times can be set per day.

Press the DAY button to complete the time setting and return to the day of the week setting.

5

Repeat steps 3 and 4.

To complete the weekly timer settings, press the SET button for 2 seconds or more.

•To delete the operating time

If the DELETE button is pressed during

steps 3 or 4, the operating time for the selected day will be deleted.

If all the days are selected, the operating times for all of the days will be deleted.

NOTES

•The operating time can be set in 30-minute increments only.

•The OFF time can be carried over to the next day.

•The ON timer and the OFF timer functions cannot be set using the weekly timer. Both an ON and OFF time must be set.

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operating Manual Contents Safety PrecautionsRemote controller Name of PartsPreparatory Operation Set the current day and timeTo start/stop operation To set the operation modeOperation Room temperature sensor selection Child lock functionTimer Functions ON/OFF TimerTime setting Weekly timer settingDay of the week setting Weekly Timer Weekly timer operationNormal Next day setting To set the DAY OFF for a holidayTemperature SET Back Timer Temperature SET Back timer settingTemperature SET Back timer operation Day setting Operating time settingCleaning the Air Filter Cleaning and CareTroubleshooting Check Once Operating Tips Mode operation Auto About Mode OperationEvent of Power Interruption Auto RestartTemperature and Humidity Range SELF-DIAGNOSISFujitsu General Limited

R410A specifications

Fujitsu R410A is a state-of-the-art refrigerant commonly used in air conditioning systems and heat pumps. Recognized for its superior thermal efficiency and environmental considerations, R410A has become a popular choice among manufacturers and consumers alike.

One of the standout features of Fujitsu R410A is its high energy efficiency. This refrigerant operates on a higher pressure than traditional refrigerants like R22, which allows for better heat exchange and thus improves the overall performance of HVAC units. The efficiency is evident in both cooling and heating capacities, which contributes to reduced energy costs for end users. As energy efficiency becomes increasingly important, R410A meets the demands of modern consumers looking for sustainable solutions without sacrificing comfort.

Fujitsu incorporates advanced technologies in their R410A systems to enhance performance further. The variable speed inverter technology found in many Fujitsu air conditioning systems allows for more precise temperature control and improved efficiency. By adjusting the compressor speed according to the cooling or heating demand, these systems can operate at a lower capacity when required, reducing energy consumption and maintaining indoor comfort more effectively.

Another characteristic of Fujitsu R410A is its low global warming potential (GWP). While traditional refrigerants have raised concerns about their impact on climate change, R410A has a significantly lower GWP, making it a more environmentally friendly option. The use of R410A helps meet international regulations aimed at reducing greenhouse gas emissions, positioning it as a sustainable choice in the HVAC industry.

Additionally, Fujitsu units utilizing R410A are known for their quiet operation. Advances in design and engineering minimize noise levels, contributing to a more pleasant indoor environment. Noise-reduction technologies, combined with efficient airflow management, ensure that users can enjoy comfort without disruptive sounds.

Furthermore, Fujitsu provides robust support and maintenance services for R410A systems, ensuring optimal performance over their lifespan. Their commitment to reliability is reflected in the build quality and design of the units, which are engineered for longevity and dependability.

In summary, Fujitsu R410A is a premium refrigerant characterized by high energy efficiency, advanced inverter technology, low global warming potential, and quiet operation. These features make it a preferred choice for modern air conditioning and heating solutions, affirming Fujitsu's commitment to innovation in the HVAC industry while prioritizing environmental responsibility.
Top Page Image Contents