Swing Operation, Coil DRY Operation | Fujitsu AOU18RLQ, ASU15RLQ

SWING OPERATION

Begin air conditioner operation before performing this procedure.

To select SWING Operation

Press the SWING button (Fig. 6 T).

The SWING Display (Fig. 7 b) will light.

In this mode, the Air Flow Direction Louvers will swing automatically to direct the air flow both up and down.

To stop SWING Operation

Press the SWING button (Fig. 6 T) once again.

The SWING Display (Fig. 7 b) will go out.

Airflow direction will return to the setting before swing was begun.

About Swing Operation

During cooling/Dry mode :		Swings between 1 and 3.
During heating mode	:	Swings between 3 and 7.

●The SWING operation may stop temporarily when the air conditioner’s fan is not operating, or when operating at very low speeds.

COIL DRY OPERATION

The Indoor unit can be dried by pressing the COIL DRY button on the Remote Control Unit so as to avoid going moldy and restrain the breed of bacterium.

The COIL DRY Operation will operate for 30 minutes after pressing the COIL DRY button and it will stop automatically.

To select COIL DRY Operation

Press the COIL DRY button (Fig. 6 P) during operation or when it stops.

The COIL DRY Indicator Lamp (orange) (Fig. 3 8) and the COIL DRY Display (Fig. 7 c) will light. Then it will disappear after 30 minutes.

To cancel COIL DRY Operation

Press the START/STOP button (Fig. 6 N) during COIL DRY

Operation.

The COIL DRY Indicator Lamp (orange) (Fig. 3 8) and the COIL DRY Display (Fig. 7 c) will go out . Then the operation stops.

About COIL DRY Operation

●Press the COIL DRY button again during COIL DRY Operation, COIL DRY Opera- tion can be reset.

●The COIL DRY Operation cannot get rid of the existed mould or bacterium, and it has no sterilization effect either.

MANUAL AUTO OPERATION

Use the MANUAL AUTO operation in the event the Remote Control Unit is lost or otherwise unavailable.

How To Use the Main Unit Controls

Press the MANUAL AUTO button (Fig. 2 2) on the main unit control panel.

To stop operation, press the MANUAL AUTO button (Fig. 2 2) once again. (Controls are located inside the Open Panel)

En-11

●When the air conditioner is operated with the controls on the Main Unit, it will operate under the same mode as the AUTO mode selected on the Re- mote Control Unit (see page 6).

●The fan speed selected will be “AUTO” and the thermostat setting will be standard.(76 °F)

AOU18RLQ, AOU15RLQ, ASU18RLQ, ASU15RLQ specifications

Fujitsu is a prominent name in the HVAC industry, known for its innovative air conditioning solutions that combine efficiency, comfort, and advanced technologies. Among its popular models are the AOU15RLQ, AOU18RLQ, ASU15RLQ, and ASU18RLQ. These units are designed to meet diverse cooling and heating needs for residential and commercial spaces.

The AOU15RLQ and AOU18RLQ are outdoor units that serve as the backbone of Fujitsu's multi-split air conditioning systems. One of their main features is their ENERGY STAR certification, which ensures superior energy efficiency. Both models incorporate inverter technology, allowing them to adjust their cooling and heating output based on the current demand. This leads to reduced energy consumption and increased comfort.

Moreover, these outdoor units operate quietly, providing a peaceful environment for users. They are designed with a compact footprint, making them suitable for various installation locations. The AOU series also supports multi-zone configurations, allowing homeowners to control different areas of their space independently, thereby enhancing comfort and efficiency.

On the other hand, the ASU15RLQ and ASU18RLQ are the corresponding indoor units that work seamlessly with their outdoor counterparts. These models feature a sleek design that can effortlessly blend into any décor. They utilize advanced air filtration systems that capture dust, allergens, and other pollutants, promoting indoor air quality.

Both indoor models offer multiple fan speeds and adjustable airflow direction, ensuring optimal distribution of conditioned air. The ASU series is equipped with user-friendly remote controls and includes programmable timers, allowing for customizable operation that aligns with users' schedules.

Fujitsu has also integrated smart technology into these units. The models can be connected to Wi-Fi, enabling users to control their air conditioning systems remotely through their smartphones. This integration facilitates monitoring and adjusting settings from anywhere, enhancing convenience.

In summary, the Fujitsu AOU15RLQ, AOU18RLQ, ASU15RLQ, and ASU18RLQ represent a harmonious blend of innovation and efficiency. With their advanced inverter technology, energy-saving features, and smart connectivity, these air conditioning systems are well-suited for modern homes looking for reliable and effective climate control solutions. Whether for residential use or light commercial applications, these models cater to a broad spectrum of comfort needs, ensuring a pleasant indoor environment year-round.