Specifications, Ventilation, Contents | Gas-Fired Products HS125LP

SPECIFICATIONS

MODEL NO	MH125LP/HS125LP		..........HS125NG
GAS TYPE		LP-Gas	....... Natual Gas
MAX. INLET PRESSURE	14	IN. W.C.	...... 14	IN. W.C.
MIN. INLET PRESSURE	11	IN. W.C.	........ 7	IN. W.C.
MANIFOLD PRESSURE	9.5	IN. W.C.	......... 6 IN.W.C.

WARNING

DO NOT EXCEED ½ psi (14” w.c.) GAS PRESSURE TO THE GAS CONTROL VALVE.

VENTILATION

WARNING

THIS APPLIANCE IS UNVENTED AND MUST BE USED ONLY IN A WELL VENTILATED AREA.

The flow of combustion and ventilation air must not be obstructed. DO NOT use in a tightly enclosed area.

Any combustion process requires and consumes oxygen, and may produce carbon monoxide. This heater must be operated with adequate ventilation. Two openings directly to the outdoors must be provided, one low and one high, preferably on opposite sides of the area to be heated. Each of these openings must provide at least three square inches of combustion air-intake area and exhaust outlet area for every 1000 BTUs per hour of heater input rate in order to complete the combustion/ventilation process. Provide additional ventilation for any additional fuel- burning appliances and/or additional occupants.

CLEARANCE (Minimum clearances to combustible materials)

Do not exceed the gas supply pressures shown on rating plates. The maximum inlet gas supply pressures and minimum inlet supply pressures (for purposes of input adjustment) for LP-Gas and Natural gas are shown as follows:

MODEL NO.	BTU/HR RATING		NORMAL OPERATING		CLEARANCES TO
	TYPE GAS		POSTION		COMBUSTIBLES

	NATURAL	LP-GAS		TOP		SIDES	BACK

MH125LP/
HS125LP		125,000*	VERTICAL	48”		60”	60”

HS125NG	125,000		VERTICAL	48”		60”	60”

*Tank size and tank temperature can directly affect BTU output

CONTENTS
Installation Instructions	3
Location	3
Piping	3
Operating Instructions	4
Lighting and Shut Down	4
Maintenance Instructions	5
Replacement Parts List	6
Service and Parts Ordering Information	8

FOR YOUR SAFETY

Do not use this heater in a space where gasoline or other liquids having flammable vapors are stored or used.

The heater is designed and approved for use as a construction heater under ANSI Z83.7 / CGA 2.14 - 2000

We cannot anticipate every use which may be made of our heaters. CHECK WITH YOUR LOCAL FIRE SAFETY AUTHORITY IF YOU HAVE QUESTIONS ABOUT APPLICATIONS.

Other standards govern the use of fuel gases and heat producing products in specific applications. Your local authority can advise you about these.

This appliance is intended to be used primarily for the heating of buildings under construction, alteration or repair.

THE STATE OF CALIFORNIA REQUIRES THE FOLLOWING WARNING:

WARNING

Combustion by-products produced when using this product contain carbon monoxide, a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm).

Enerco Group, Inc. Gas-Fired Infra-Red Portable Construction Heater

Operating Instructions and Owner’s Manual

HS125LP, HS125NG, MH125LP specifications

Gas-fired products are a popular choice for heating and energy needs due to their efficiency and reliability. Among the various models available, the HS125LP, MH125LP, and HS125NG stand out for their advanced features and technologies tailored to meet diverse consumer demands.

The HS125LP and MH125LP models are designed specifically for use with propane, providing flexible installation options and consistent heating performance. Meanwhile, the HS125NG is optimized for natural gas, allowing users to tap into a more sustainable energy source. Each product features a robust construction, ensuring longevity and resistance to wear under different operating conditions.

One of the main features of these models is their high-efficiency ratings. They are engineered to maximize energy conversion, which translates to lower operational costs and reduced environmental impact. This is achieved through innovative burner designs that ensure complete combustion and minimized emissions. The incorporation of advanced heat exchanger technology enables these units to transfer heat effectively while also maintaining safety standards.

These gas-fired products are also equipped with user-friendly controls that enhance the overall user experience. Digital thermostat systems provide precise temperature management, allowing users to maintain desired comfort levels while optimizing energy usage. Additionally, many models include smart connectivity options, enabling remote access and control through mobile devices.

Safety is a paramount concern with gas-fired products, and the HS125 series does not compromise in this regard. They come equipped with multiple safety features, including flame failure protection, pressure regulators, and multiple sensors that monitor operational parameters. These features work in tandem to prevent any potential hazards and ensure peace of mind for the user.

Furthermore, the HS125LP, MH125LP, and HS125NG models are designed for quiet operation, making them suitable for a variety of environments, from residential to commercial applications. Their compact designs also facilitate easy installation in tight spaces without the need for extensive modifications.

In conclusion, the HS125LP, MH125LP, and HS125NG gas-fired products represent a blend of efficiency, safety, and modern technology. With their specialized designs catering to both propane and natural gas, these models offer reliable heating solutions for today's energy-conscious consumers. Whether for warming homes, powering appliances, or supporting industrial processes, these gas-fired units stand out in the market for their innovative approach to heating technology.

SPECIFICATIONS

VENTILATION

CONTENTS

FOR YOUR SAFETY

HS125LP, HS125NG, MH125LP specifications