Installation Instructions, Installation Guide

PRE-INSTALLATION INSTRUCTIONS:

Carefully unpack all contents of carton.

•This window fan comes fully assembled and is ready for immediate installation.

•PLEASE NOTE: There are separate sets of extender panels at each end of the box, packed in the styrofoam. For this model there are a total of two, measuring 3.5” each.

•Before installation, familiarize yourself with the built-in side exten- der (B) and the 2 additional extenders (A) provided to assist you in achieving the perfect fit for your window fan (see figure #1).

INSET OF CONTROL PANEL		(Figure 1)
E	A	B
D
D
C

WE RECOMMEND KEEPING THE WINDOW SCREEN IN PLACE. A. SLIDE-ON EXTENDERS (TWO 3.5”)

B. BUILT-IN SLIDE-OUT EXTENDER (PULLS OUT 7”) not shown

C. 3 SPEED CONTROL

D.THERMOSTAT CONTROL DIAL

E.INTAKE/EXHAUST SWITCH

INSTALLATION INSTRUCTIONS:

This window fan has been designed to fit double-hung or vertical slider/windows with minimum openings of 19” wide and 14” high. As noted above, it is also designed and recommended for use with your window screen in place.

FOR DOUBLE-HUNG AND SLIDER WINDOWS:

NOTE: On SLIDER WINDOWS the bottom section must be the side you add extenders to (left side). The controls should face toward the window.

STEP 1. With the window open, take an accurate measurement of the opening where the unit will be placed.

STEP 2. Match your window measurement with the installation guide on page 2; adding the appropriate extender panel(s) (3.5” each) to the left side, while using the built-in extender on the right side (up to 7”).

STEP 3. Once you have added extender panels (if necessary), set the fan in the window and complete the installation process with the built-in extender. Pull out both clips on the right side (top to bottom) of the fan, then adjust the built-in extender to fill the remaining space. After obtaining a snug, safe fit, lock the extender in place, by pushing the clips down.

Page2

STEP 4. Carefully close the window onto the top of the fan so that the bottom edge of

the window rests behind the top line of the fan housing. This helps hold the fan in place.

(Figure 2)

CASEMENT WINDOWS:

For a safe, secure fit in your casement window, you will need a special bracket system. For easier installation in a casement window, we will provide you with two brackets and screws at no additional cost. Please keep in mind, your casement window must to be at least 19” high and 14” wide to use this window fan. Please call our customer service department, 1-800-5-HOLMES, for further assistance.

INSTALLATION GUIDE:

For 19” to 22” Use up to 3” of right side, pull out extender.

For 23” to 26” Use one 3.5” extender panel on the left side. Adjust the pull out extender on the right for a tight fit (from .5” to 7”)

For 27” to 33” Use two 3.5” extender panels on the left side. Adjust the pull out extenders on the right for a tight fit (To 7”)

Larger than 33” Additional extender panels will be required. (See attached mail order offer or call 1-800-5-Holmes.)

	TOP LINE OF FAN		(Figure 3)
LEFT		RIGHT
EXTRA EXTENDER PANELS		BUILT-IN, PULL OUT EXTENDERS

22”			PULLS OUT UP TO 7”

UNIT’S LENGTH

Two 3.5” extenders, (Included in your box packed at both ends)

window fan, HAWF-1013 specifications

The Holmes HAWF-1013 is a versatile and energy-efficient window fan that provides an effective solution for maintaining optimal airflow in your living space. Designed to fit most standard window sizes, this fan combines convenience with advanced technology to enhance indoor comfort during the warmer months.

One of the standout features of the HAWF-1013 is its twin fan design, which allows for both intake and exhaust capabilities. This feature enables users to draw fresh air from the outside while expelling hot air from the interior, promoting a refreshing cross-ventilation effect. With two speed settings, users can easily adjust the airflow intensity according to their preferences and the ambient conditions. The quiet operation of the fan ensures a peaceful environment, allowing for relaxation or uninterrupted sleep.

The HAWF-1013 incorporates an adjustable extender panel, accommodating various window sizes and making installation straightforward and user-friendly. This panel ensures a secure fit, preventing any external elements from intruding into your home. The fan is also equipped with a removable and washable mesh filter, which effectively captures dust and allergens, contributing to improved indoor air quality.

Another impressive characteristic of the Holmes HAWF-1013 is its energy-efficient design. Operating on low power consumption, this fan not only cools your space efficiently but also helps reduce electricity bills, making it a cost-effective option for households. The fan is designed with a durable and lightweight frame, ensuring longevity and ease of use.

For enhanced safety, the HAWF-1013 features a built-in safety grill, protecting fingers from the rotating blades, making it a suitable choice for families with children and pets. Its stylish and modern design allows it to blend seamlessly with any interior decor, adding both functionality and aesthetic appeal to your home.

In summary, the Holmes HAWF-1013 window fan is an ideal choice for those seeking an efficient, durable, and user-friendly option for cooling their living spaces. With its twin fan capabilities, adjustable extender panel, washable filter, and energy-efficient operation, it stands out as a reliable solution for maintaining comfortable indoor temperatures while ensuring clean air circulation. Whether you're relaxing at home or hosting guests, this window fan is designed to enhance your overall comfort and satisfaction.