Operating Instructions, Adjustment Instructions

Final Assembly

Step 1: Insert the neck of the fan head into the hollow end of the pole and turn the neck clockwise to lock into place.

Step 2: Attach the front of the 1 Touch™ control module by sliding the 2 tabs into the corresponding holes on the pole.

Step 3: Attach the rear of the 1 Touch™ control module to the front by inserting the 4 clips into the corresponding holes.

Step 4: For additional security, insert and tighten the thumbscrew into the top rear of the 1 Touch™ control module.

FIGURE 2

OPERATING INSTRUCTIONS

Your fan is equipped with the technologically advanced 1Touch™ thermostat. You can set the fan from either the main housing or the remote control to run continuously in manual mode ore set the 1Touch™ thermostat to your desired temperature setting. The 1Touch™ thermostat will automatically turn the fan ON or OFF depending on the preset comfort level. The comfort level ranges between 60° and 80° Fahrenheit.

•Set the fan base on a dry, level surface.

•Plug the fan into a 120V AC electrical outlet

•To start the unit and run continuously, push the button on the fan housing or on the remote control once for the High setting and press either button twice for the Low setting

•To stop the unit, press and hold the button on the fan housing or on the remote control for two seconds or keep pressing the button until all the speed and temperature indicators are OFF

•The OSCILLATION control knob is located on the top of the fan motor housing. To start oscillation, push knob down. To stop oscillation, pull knob up

1 Touch™ Thermostat Instructions

To take advantage of the 1Touch™ Thermostat, continue to press the button until the desired temperature is reached. When ambient temperature drops below the set temperature, the fan will stop. When the room temperature rises above the set point, the fan will turn on automatically.

Note: It is normal for the fan to cycle ON and OFF as it maintains the preset temperature. To prevent the unit from cycling, you need to raise the thermostat setting.

1Touch™ has memory. The 1Touch™ thermostat will remember the previous temperature setting after the unit has been turned off. However if the unit is unplugged, the 1Touch™ thermostat will be reset and will no longer remember the previous temperature setting.

Remote Control Handheld Unit

Your remote control requires 2 AAA batteries for operation. To install the batteries, simply depress the back of the remote with your thumb on the spot marked OPEN. Insert batteries according to the diagram shown inside. Replace Cover.

•Do not mix old and new batteries.

•Do not mix alkaline, standard (carbon-zine), or rechargeable (nickel-cadmium) batteries.

ADJUSTMENT INSTRUCTIONS

Tilt Adjustment:

Your fan is equipped with the Total Flex™ tilt adjustment mechanism. Total Flex™ allows you to angle the fan head to a straight up position. This position allows for whole room air circulation. Follow these instruc- tions to tilt the fan head for upward angled air movement or whole- room air circulation. You may use the oscillation feature in this position.

Step 1: To change the tilting angle of the fan head; simply loosen the Tilt Adjustment Knob (see figure 1).

Step 2: Move the fan head to the desired angle, and firmly tighten the knob to lock in place.

Height Adjustment

Step 1: Turn the base collar counter-clockwise to loosen the extension pole.

Step 2: Adjust the extension pole to the desired height, and firmly tighten the base collar in a clockwise direction.

CLEANING/MAINTENANCE INSTRUCTIONS

Follow these instructions to correctly and safely care for your Holmes stand fan. Please remember:

•Always unplug the fan before cleaning or disassembling.

•Do not allow water to drip on or into the fan motor housing.

•Do not use any of the following as a cleaner: gasoline, thinner, benzine (See instructions for fan head assembly)

Step 1: To access the fan blade, remove the front grill and the fan blade nut.

Step 2: Clean the fan blade, both front and rear grills with a soft cloth moistened with a mild soap solution.

Step 3: Replace blade, tighten the blade nut, and securely fasten the front grill.

Fan Head, Base, and Pole Cleaning

Using a soft, moist cloth, with or without a mild soap solution, carefully clean the fan base, pole, and head. Please use caution around the motor housing area. Do not allow the motor or other electrical components to be exposed to water.

FAN STORAGE

Your fan can be stored in the off-season either partially disassembled or assembled. It is important to keep it in a safe, dry location.

•If stored disassembled, we recommend using the original (or appropriately sized) box.

•If stored assembled or partially assembled, remember to protect the fan head from dust.

HASF1796RC specifications

The Holmes HASF1796RC is a prominent choice for those seeking effective air purification solutions in their homes or offices. This air purifier combines advanced technology with user-friendly features to improve indoor air quality, ensuring that you and your family breathe cleaner air.

One of the key characteristics of the Holmes HASF1796RC is its efficient HEPA filtration system. This feature captures up to 99.97% of airborne particles as small as 0.3 microns, including dust, pollen, pet dander, and smoke. This level of filtration is essential for individuals with allergies or respiratory issues, as it significantly reduces the presence of allergens in the air.

In addition to its HEPA filter, the HASF1796RC is equipped with a built-in activated carbon filter. This component is specifically designed to eliminate odors caused by cooking, pets, smoke, and other household activities. The combination of HEPA and activated carbon filtration makes this model exceptionally comprehensive in addressing a variety of air quality concerns.

The design of the Holmes HASF1796RC is another standout feature. It boasts a sleek and modern aesthetic that can easily blend into any home or office decor. The compact size makes it suitable for various rooms, including bedrooms, living rooms, and workspaces. Its portability allows users to move it from room to room as needed.

Another significant technological innovation in the HASF1796RC is its three-speed fan control. Users can easily adjust the fan speed depending on their air purification needs and preferences. When maximum purification is required, the high-speed setting can quickly circulate and clean the air, while the low-speed setting operates quietly, making it ideal for nighttime use.

For added convenience, the Holmes HASF1796RC comes with an easy-to-use filter replacement indicator. This feature alerts users when it is time to replace the filters, ensuring the air purifier operates at optimal efficiency. The overall maintenance is straightforward, making it a user-friendly option for anyone new to air purifiers.

In summary, the Holmes HASF1796RC air purifier is an excellent investment for anyone looking to improve their indoor air quality. With its powerful HEPA and activated carbon filtration, stylish design, adjustable fan speeds, and user-friendly features, it offers a comprehensive solution for cleaner air at home or in the office.