AOR240FC06EM1.qxd 4/20/06 14:12 Page 2
P L E A S E R E A D A N D S A V E T H E S E |
| F E A T U R E S - O P E R A T I O N S |
| F E A T U R E S - O P E R A T I O N S | C L E A N I N G A N D |
I M P O R T A N T S A F E T Y I N S T R U C T I O N S |
|
| F E A T U R E S - | ||
|
|
|
| ||
|
|
|
|
|
|
M A I N T E N A N C E O P E R A T I O N S
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1.Read all instructions before using the appliance.
2.To avoid fire or shock hazard, plug the appliance directly into a 120V AC electrical outlet.
3.If the filter is covered by a bag when shipped: Remove plastic bag before use.
4.Keep the cord out of heavy traffic areas. To avoid fire hazard, NEVER put the cord under rugs, near heat registers, radiators, stoves, or heaters.
5.To protect against electrical hazards, DO NOT immerse in water or other liquids. Do not use near water.
6.Close supervision is necessary when any appliance is used by or near children, or disabled persons.
7.Always unplug the appliance before moving it, changing the filters, cleaning, or whenever the air purifier is not in use. Be sure to pull by the plug and not the cord.
8.NEVER drop or insert any object into any openings.
9.DO NOT operate any appliance with a damaged cord or plug, if motor fan fails to rotate, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Return appliance to manufacturer for examination, electrical or mechanical adjustment, or repair.
10.Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended by the manufacturer may cause hazards.
11.DO NOT use outdoors.
12.Never block the air openings, or place on soft surface, such as bed or sofa, as this could cause the unit to tip over thus blocking the air intake opening.
13.Keep unit away from heated surfaces and open flames.
14.DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by qualified personnel only.
15.WARNING: To reduce the risk of fire or electrical shock, DO NOT use this appliance with any
16.DO NOT place anything on top of the unit.
17.Never place the unit in a pet carrier, kennel, or cage with an animal.
18.As with any appliance, make sure you locate the Fresh 'n Clean™ Odor Grabber Max™ appliance away from pets and out of the reach of children.
19.Locate the Fresh 'n Clean™ Odor Grabber Max™ appliance so that the power cord is not accessible to pets.
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
CORD AND PLUG INSTALLATION SAFETY INSTRUCTIONS
The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in or tripping over a longer cord. If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the appliance. Care must be taken to arrange the extension cord so that it will not drape over the countertop or
PLEASE SAVE THESE INSTRUCTIONS
Congratulations on your purchase of the Fresh 'n Clean™ Odor Grabber Max™ appliance. Your Fresh 'n Clean™ Odor Grabber Max™ appliance has an attractive design that can sit horizontally on a table or desk. It is quiet and safe for use around household pets and ideal for use around litter boxes, pet beds, and small animal cages.
The Fresh 'n Clean™ Odor Grabber Max™ appliance features Triple Filtration Technology, an optional ionizer, and HI (III), MEDIUM (II), and LO (I) speed settings.
The best way to reduce odors is to remove the source. Since most odors originate from pet waste, moisture, and water, it is important to keep a pet’s habitat and litter area dry and clean. This will help reduce the occurrence of odors and maximize the benefit of using the Fresh 'n Clean™ Odor Grabber Max™ appliance.
IONIZER
Your Fresh 'n Clean™ Odor Grabber Max™ appliance has an optional ionizer, which, when turned on, releases negative ions into outgoing filtered air. Ions are tiny particles that carry a positive or negative charge. These ions exist naturally around us, in the air, water, and ground. Both positive and negative ions are colorless, odorless, and completely harmless. Negative ions help the air purification process by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles such as dust, pollen, smoke, and pet dander to form larger particles that are then more readily captured by the Fresh 'n Clean™ Odor Grabber Max™ filter, or they may be attracted to positively charged surfaces like walls or floors. This may occur more frequently when the filter is nearing the end of its functional life expectancy and is able to capture less of the changed particles.
You may also note after extended use, that dust may have collected around the grills or front panel. This is from the ionization affect caused by the negative ions exiting from the air outlet. This is additional evidence of the air cleaning effectiveness of negative ions. The dust can be easily
NOTE: It is important to replace the filter at the recommended intervals. Using the ionizer in conjunction with dirty filters may result in dirty particles exiting the unit and being attracted to walls, carpets, furniture, or other household objects. These dirty particles may prove very difficult to remove. Homes with excessive amounts of pet dander, dust, or smoke may decrease the life expectance of the Fresh 'n Clean™ Odor Grabber Max™ filter and may interfere with the ionization process. You may want to run the ionizer less often and/or check the condition of the Fresh 'n Clean™ Odor Grabber Max™ filter more frequently in order to reduce particles from being attracted to surfaces throughout your home, as mentioned above.
The ionizer in the Arm & Hammer® Fresh 'n Clean™ Odor Grabber Max™ appliance produces less ozone than the UL established limits of 50ppb. However, if concentrated, ozone can be harmful to birds and small pets. To prevent ozone
PRE-OPERATING INSTRUCTIONS
1.Carefully unpack your Fresh 'n Clean™ Odor Grabber Max™ appliance and place it vertically on a firm, level surface.
2.Grasp the sides of the air inlet grill and pull up to remove it.
3.Slide the Fresh 'n Clean™ Odor Grabber Max™ filter out and remove the protective plastic bag.
NOTE: Once the filter has been removed from the
NOTE: Since the filter absorbs odors even when the unit is off, we recommend that you place the unit in a plastic bag when it is not being used. If you have additional filters, keep them in their protective bags until you are ready to install them in your Fresh 'n Clean™ Odor Grabber Max™ appliance.
Figure 1 |
|
|
| ||
A. INLET GRILL | C | E | F | ||
B. WASHABLE FOAM | |||||
D |
| ||||
|
|
| |||
| G |
|
| ||
C. SPEED CONTROL |
|
| |||
D. POWER INDICATOR |
|
|
| ||
E. | FILTERED AIR OUTLET |
|
| I | |
F. | IONIZER CONTROL |
| B | H | |
G. IONIZER LIGHT | A | ||||
| |||||
H. FILTER |
|
|
| ||
I. | POWER CORD |
|
|
| |
OPERATING INSTRUCTIONS
1. Place the Fresh 'n Clean™ Odor Grabber Max™ |
appliance on a table or desk in a central location of your |
room, about 1 foot away from the wall. Never place the |
unit in a pet carrier, kennel, or cage with an animal. As |
4.To release negative ions into the filtered air, slide the ionizer switch to ON (I). The ionizer indicator light illuminates when the ionizer is on.
5.For optimum air filtration, operate the Fresh 'n Clean™ Odor Grabber Max™ appliance continuously. Its rugged motor has been designed to give many years of use.
For continuous use, we recommend that you operate the Fresh 'n Clean™ Odor Grabber Max™ appliance on the HI
(III)setting. For quieter operation or for use in a bedroom, select the LO (I) setting.
CLEANING AND MAINTENANCE
INSTRUCTIONS
Always turn off and unplug the unit before cleaning.
1.Clean the outside of the Fresh 'n Clean™ Odor Grabber Max™ appliance with a soft, damp cloth.
2.Remove and wash the air inlet grill in warm, soapy water (not dishwasher safe). Dry before replacing on the unit.
3.Remove dust from the top air outlet grill with a small, soft brush.
WARNING: Do not allow moisture to come in contact with the main housing of the Fresh 'n Clean™ Odor Grabber Max™ appliance.
FILTER REPLACEMENT INSTRUCTIONS
Check the condition of the filter every two weeks. If you notice a reduction in odor removal and/or a significant amount of dust or lint, replace the filter. We recommend changing the filter every
1.Turn off and unplug the unit.
2.Remove the air inlet grill and examine the filter.
3.Slide the Fresh 'n Clean™ Odor Grabber Max™ filter into the unit and replace the grill.
DO NOT attempt to wash and
Replacement filters are available from your local supplier or by calling
TRIPLE FILTRATION TECHNOLOGY
removed with a clean, damp cloth or soft brush.
Finally, using your ionizer may result in an occasional
protective plastic bag, it will start to absorb odors and should be installed in the Fresh 'n Clean™ Odor Grabber Max™ appliance.
with any appliance, make sure you locate the Fresh 'n |
Clean™ Odor Grabber Max™ appliance away from pets |
and out of the reach of children. |
Model Number | Number of Filters Needed | Filter Number |
THIS PRODUCT IS EQUIPPED WITH A POLARIZED PLUG (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet.
DO NOT DEFEAT THE SAFETY PURPOSE OF THIS
POLARIZED PLUG IN ANY WAY
The Fresh 'n Clean™ Odor Grabber Max™ filter combines zeolite, baking soda, and activated carbon to eliminate pet odors. The zeolite neutralizes acidic odors, while the Arm & Hammer® baking soda absorbs organic odors and the activated carbon battles gaseous odors. The optional ionizer also aids in the removal of pet dander and other airborne contaminants from the air passing through the filter for fresher, cleaner air in your home.
popping or cracking sound. This is a normal sound, generally caused by a small
4.Slide the Fresh 'n Clean™ Odor Grabber Max™ filter back into the unit and replace the air inlet grill (Figure 1).
2. | Plug the unit into a 120V AC electrical outlet. Particular |
| care should be taken to locate the Fresh 'n Clean™ Odor |
| Grabber Max™ appliance so that the power cord is not |
| accessible to pets. |
3. | Slide the speed switch to HI (III), MEDIUM (II), or LO (I). |
| The power indicator light illuminates when the power is |
| on. |
1 |