Operating Instructions, FCC Statement | Holmes HAPF624R specification

P L E A S E R E A D A N D S AV E T H E S E

I M P O R TA N T S A F E T Y I N S T R U C T I O N S

F E AT U R E S - O P E R AT I O N S

C L E A N I N G / M A I N T E N A N C E

When using electrical appliances, basic safety precautions should always be taken including the following:

1.	Read all instructions before using this appliance.
2.	Use fan only for purposes described in the instruction
	manual.
3.	To protect against electrical shock do not immerse
	unit, plug or cord in water or spray with liquids and
	plug the appliance directly into a 120V AC electrical
	outlet.
4.	Close supervision is necessary when any appliance is
	used by or near children.
5.	Unplug from outlet when not in use, when moving
	fan from one location to another, before putting on
	or taking off parts and before cleaning.
6.	Avoid contact with moving parts.
7.	Do not operate in the presence of explosive and/or
	flammable fumes.
8.	To avoid fire hazard, NEVER place the cord under
	rugs or any parts near an open flame, cooking or
	other heating appliance.
9.	Do not operate any appliance with a damaged cord

12.	Do not let the cord hang over the edge of a table,
	counter or come in contact with hot surfaces or leave
	exposed to high traffic areas.
13.	Do not use outdoors.
14.	To disconnect, grip plug and pull from wall outlet.
	Never yank on cord.
15.	Always use on a dry, level surface.
16.	Do not operate fan until fully assembled with all
	parts properly in place.
17.	This product is intended for household use ONLY and
	not for commercial or industrial applications.
18.	WARNING: To reduce the risk of electrical shock
	and injury to persons, do not use in window.
19.	WARNING: To reduce the risk of fire or electric
	shock, do not use this fan with any solid-state speed
	control device.
20.	This product employs overload protection (fuse). A
	blown fuse indicates an overload or short-circuit
	situation. If the fuse blows, unplug the product from
	the outlet. Replace the fuse as per the user servicing
	instructions (follow product marking for proper fuse

OPERATING INSTRUCTIONS

1.Set the fan on a dry, level floor.

2.Plug cord into any standard 120 volt AC outlet.

3. To turn the fan on, press the On/Off button ( ).

4.Press the Fan Speed button () to select the desired speed setting:

1-Low2-Medium3-High

5. Press the Timer button ( ) to begin the timer sequence to off setting. Continue to press until the desired time remaining is selected. The time settings cycle in durations of 1,2,4 or 8 hours and will be indicated by the appropriate LED illumination. The timer can be set up to 8 hours.

6.Press the Sleep/Breeze button () to randomly mimic the natural feeling of the wind.

7.Press the Oscillation button () to operate the rotating front grill. When rotating, the airflow will cover a wider area and help to circulate air throughout the room.

8.To stop the fan, press the On/OFF button ().

Fig. 2

FCC STATEMENT

Potential for Radio/Television interference

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. The product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the product on or off, the user is encouraged to try to correct the interference by one or more of the following

REMOTE CONTROL

This remote control (see Fig. 2) requires 2 AAA batteries, 1.5V (not included).

Battery Replacement:

a)Remove battery cover from remote control.

b)Remove old batteries from the remote control.

c)Insert two new batteries, pressing them firmly into their slot.

d)Replace the battery cover.

e)For your convenience, a remote control holder is integrated into the back of the fan housing.

NOTE:

• Replace all batteries of a set at the same time.

• Being careful not to bend or damage the contact spring,

clean the battery contacts and devices' contacts prior to

installing the batteries.

• Remove the batteries from the equipment when it is not

being used for an extended period of time.

• Remove the used batteries promptly.

• Do not mix old and new batteries. Do not mix alkaline,

or plug after the appliance malfunctions, or has been

dropped/damaged in any manner. Discard fan or

return to an authorized service facility for

examination and/or repair.

10. Do not run cord under carpeting. Do not cover cord

with throw rugs, runner, or similar coverings. Do not

route cord under furniture or appliances. Arrange

cord away from traffic area and where it will not be

tripped over.

11. The use of attachments not recommended or sold by

the appliance manufacturer may cause hazards.

rating) and check the product. If the replacement fuse

blows, a short circuit may be present and the product

should be discarded or returned to an authorized

service facility for examination and/or repair.

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS

	Fig. 1	3
	Fig. 1	See Fig.2
		See Fig.2
	1

4.Power Button

5.Oscillation Button

6.3-Speed Button

7.Adjustable Timer

8.2-Breeze Mode Button

9.Remote Control

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the product and the

receiver.

• Connect the product into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

• Changes or modifications not expressly approved by the

party responsible for compliance could void the user’s

standard (carbon-zinc), or rechargeable batteries.

• Do not discard used batteries into household trash

containers. Contact your local government for disposal

or recycling practices in your area.

CLEANING/MAINTENANCE INSTRUCTIONS

Follow these instructions to correctly and safely care for your fan. Please remember:

REPLACEABLE FUSE

THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.

DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS

SAFETY FEATURE IN ANY WAY.

Fig. 3

1. Rotating Grill

2.Blade (not shown)

3.Fan Handle

10.Remote Control Storage

authority to operate the equipment.

If your (5 Amp, 125 Volt) replaceable fuse blows, please order a new fuse at 1-800-546-5637. Follow the below instructions to replace the fuse on the plug.

User Servicing Instructions

1.Unplug your fan. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.

2.Open fuse cover, located on the top of the plug, by using your thumb or a flathead screwdriver to slide the cover down towards the prongs.

HAPF624R specifications

The Holmes HAPF624R is a modern air purifier designed to improve indoor air quality, making it an essential device for those concerned about allergens and pollutants. This model is equipped with advanced features that cater to various purification needs, ensuring a cleaner and healthier living environment.

One of the standout characteristics of the HAPF624R is its 3-stage filtration system. The first layer is a pre-filter that captures large particles such as dust and pet hair, which helps prolong the life of the subsequent filters. The second stage consists of a true HEPA filter, recognized for its ability to trap 99.97% of airborne particles as small as 0.3 microns. This includes common allergens like pollen, mold spores, and smoke. The final stage is an activated carbon filter that effectively reduces odors and harmful gases, making it particularly beneficial for homes with pets or smokers.

The HAPF624R incorporates Holmes’ innovative technologies to enhance its performance. The unit features a built-in air quality sensor that monitors the purity of the air in real-time. This intelligent technology allows the air purifier to automatically adjust its fan speed based on detected air quality levels, optimizing energy efficiency while ensuring effective purification. This feature is particularly appealing to those who prefer a set-it-and-forget-it approach to air cleaning.

Another notable aspect of the Holmes HAPF624R is its sleek and compact design. This makes it suitable for various room sizes, including bedrooms, living rooms, and offices. Despite its powerful performance, the device operates quietly, ensuring that users can enjoy clean air without disruptive noise.

Ease of maintenance is also a key consideration in the design of the HAPF624R. The filters are easy to access and replace, ensuring that users can maintain optimal performance with minimal effort. The filter replacement indicator eliminates guesswork, alerting users when it’s time to change the filters.

In summary, the Holmes HAPF624R air purifier combines advanced filtration technology, user-friendly features, and a stylish design to deliver a comprehensive solution for indoor air quality. Whether dealing with allergies, pet dander, or everyday pollutants, this air purifier is an excellent choice for creating a healthier living space. Its efficient performance, coupled with intuitive technology, makes it a worthwhile investment for any household.