Empire Comfort Systems installation instructions SR-30 Clearances, Wall Mount Installation

Page 10

SR-30 CLEARANCES

When facing the front of the appliance the following

CEILING

minimum clearances to combustible construction must be

 

maintained.

SIDE WALL

 

Left side 8 inches (203mm). Right side 8 inches (203mm).

Do not install in alcove or closet.

Rear wall 0 inches (0mm). Ceiling 36 inches (914mm). Minimum vertical clearance from a projection above the appliance (shelves, window sills, etc.) 36 inches (914mm).

Floor (top surface of carpeting, tile, etc.) 2 inches (51mm).

Provide adequate clearances around air openings.

Adequate accessibility clearances for purposes of servicing and proper operation must be provided.

36” MIN

8” MIN.

8” MIN.

2” MIN

FLOOR

Figure 8 (SR-30)

WALL MOUNT INSTALLATION

Refer to Figures 9, 10, 11 and 12 for measurements in order to locate (4) mounting holes on wall. Figures 9, 10, 11 and 12 are the front

views of the heaters.

1.Remove lower louver from casing assembly (2 screws).

2.Remove reflector from casing assembly (2 screws).

3.Remove upper louver from casing assembly (2 screws).

1113/16”

(300mm)

 

 

7 13/16”

 

1 3/32”

2”

(198mm)

2”

 

(28mm)

 

(51mm)

 

(51mm)

18 7/8”

(479mm)22” (559mm)

OUTLINE OF

OUTER CASING

4 1/32”

 

(102mm)

2” MIN (51mm)

 

 

FLOOR

MOUNTING HOLE LOCATIONS

VIEWED FROM FRONT OF HEATER

Figure 9 (SR-6)

1113/16”

(300mm)

 

 

7 13/16”

 

1 3/32”

2”

(198mm)

2”

 

(28mm)

(51mm)

 

(51mm)

18 7/8”

22”

(479mm)

(559mm)

OUTLINE OF

OUTER CASING

4 1/32” MIN

 

(102mm)

2” MIN (51mm)

 

 

FLOOR

MOUNTING HOLE LOCATIONS

VIEWED FROM FRONT OF HEATER

Figure 10 (SR-10)

Page 10

16942-5-0907

Image 10
Contents Installation Instructions Table of Contents Important Safety Information This is a Heating ApplianceSafety Information for Users of LP-GAS LP-GAS Warning OdorSpecifications IntroductionWater Vapor a BY-PRODUCT of Unvented Room Heaters Recommended Gas Pipe Diameter GAS SupplyGas Supply Checking Manifold PressureSR-6 Clearances SR-10 ClearancesSR-18 Clearances SR-10Wall Mount Installation SR-30 ClearancesOn Solid Wall On Sheet Rock WallOptional Floor Stand Installation SR-30 ShownFor Your Safety Read Before Lighting Lighting InstructionsSR-6 Main Burner Flame Figure Main Burner Flame CharacteristicsSR-6 SR-30 Shown Main Burner Operation Pilot Flame CharacteristicsOxygen Depletion Sensor Pilot Figure Appliance Maintenance TroubleshootingHOW to Order Repair Parts Parts ListSR-6 SR-10 Index Part Description Number SR-6 Parts View SR-10 Parts View SR-18 Parts View SR-30 Parts View Optional Blower Installation Instructions Excessive Blower Wheel NoiseBlower Motor WiringTo clean blower wheel Blower Wheel

SR-30 specifications

Empire Comfort Systems has established itself as a leading manufacturer of heating appliances, and the SR-30 gas stove is a testament to its dedication to quality and efficiency. This model is designed to seamlessly blend comfort with modern aesthetic appeal, making it an ideal choice for various living spaces.

The Empire SR-30 boasts a compact design that measures 30 inches in height, making it suitable for both small and larger rooms. One of its main features is the ability to provide heat without the need for electricity, thanks to its reliable gas-burning technology. This characteristic ensures that the stove can function during power outages, providing peace of mind and warmth even in unpredictable weather conditions.

Equipped with state-of-the-art burner technology, the SR-30 delivers an impressive heat output, ranging between 20,000 and 30,000 BTUs, capable of effectively warming spaces up to 1,200 square feet. The unit is designed with a built-in thermostat and adjustable flame control, allowing users to customize the heat output according to their comfort preferences.

Safety is a priority with the SR-30, which features a safety shut-off system designed to prevent gas leaks and ensure safe operation. The unit is also equipped with a venting system that promotes effective heat distribution while minimizing draft issues, providing a consistent and cozy warmth throughout the room.

The aesthetic design of the SR-30 is another standout feature. With a range of attractive finishes and an array of customizable options, consumers can choose a style that complements their home décor. The large glass viewing area offers a warm, flickering flame, creating an inviting atmosphere that enhances any space.

In terms of installation, the SR-30 is versatile, as it can be direct-vented or installed using a one-pipe venting system, providing options for various home configurations. Additionally, the unit operates quietly, ensuring it will not disrupt conversations or relaxation.

In conclusion, the Empire Comfort Systems SR-30 gas stove is an excellent choice for homeowners seeking an efficient, reliable, and stylish heating solution. With its powerful heating capabilities, safety features, and elegant design, the SR-30 adds warmth and charm to any living environment.