Empire Comfort Systems SR-30 installation instructions On Solid Wall, On Sheet Rock Wall

Page 11

18”

(457mm)

14”

(356mm)

13/32”

(28mm)

OUTLINE OF

OUTER CASING

18 7/8”

22”

(559mm)

(479mm)

 

4 1/32” MIN

2 1/32” (52mm)

 

(102mm)

2” MIN (51mm)

 

FLOOR

 

MOUNTING HOLE LOCATIONS

 

VIEWED FROM FRONT OF HEATER

Figure 11 (SR-18)

24 1/8”

(613mm)

2”2”

(51)

20 1/8”

(51)

 

 

(511mm)

 

13/32”

(28mm)

On Solid Wall

1.After locating mounting holes, attach (4) #10 x 1" (25mm) screws provided into the wall. Do not completely tighten screwheads to the wall, leave a 1/8" (3mm) gap between screwheads and wall.

2.Mount heater onto the (4) screwheads and complete tightening screwheads into the wall.

Attention! Use the following steps to properly align the upper louver and the reflector with the heat shield.

a.When replacing upper louver, be sure the bottom lip of upper louver goes behind the heat shield.

b.When replacing reflector, be sure the top lip of reflector goes in front of the heat shield.

3.Connect the gas line.

On Sheet Rock Wall

1.After locating mounting holes, drill (4) 5/16" (8mm) diameter holes into the wall.

2.Insert (4) plastic expansion anchors provided into the holes.

3.Tighten (4) #10 x 1" (25mm) screws provided into the plastic expansion anchors. Do not completely tighten screwheads to the plastic expansion anchors, leave a 1/8" (3mm) gap between screwheads and plastic expansion anchors.

4.Mount heater onto the (4) screwheads and complete tightening the screwheads to the plastic expansion anchors.

Attention! Use the following steps to properly align the upper louver and the reflector with the heat shield.

a.When replacing upper louver, be sure the bottom lip of upper louver goes behind the heat shield.

b.When replacing reflector, be sure the top lip of reflector goes in front of the heat shield.

5.Connect the gas line.

18 7/8”

22”

(479mm)

(559mm)

 

4 1/32”

2 1/32” (52mm)

(102mm)

2” (51mm)MIN

MIN

 

Figure 12 (SR-30)

Figure 13

16942-5-0907

Page 11

Image 11
Contents Installation Instructions Table of Contents This is a Heating Appliance Important Safety InformationLP-GAS Warning Odor Safety Information for Users of LP-GASIntroduction SpecificationsWater Vapor a BY-PRODUCT of Unvented Room Heaters Checking Manifold Pressure GAS SupplyGas Supply Recommended Gas Pipe DiameterSR-10 Clearances SR-6 ClearancesSR-10 SR-18 ClearancesSR-30 Clearances Wall Mount InstallationOn Sheet Rock Wall On Solid WallSR-30 Shown Optional Floor Stand InstallationLighting Instructions For Your Safety Read Before LightingSR-6 SR-30 Shown Main Burner Flame CharacteristicsSR-6 Main Burner Flame Figure Oxygen Depletion Sensor Pilot Figure Pilot Flame CharacteristicsMain Burner Operation Troubleshooting Appliance MaintenanceSR-6 SR-10 Parts ListHOW to Order Repair Parts Index Part Description Number SR-6 Parts View SR-10 Parts View SR-18 Parts View SR-30 Parts View Excessive Blower Wheel Noise Optional Blower Installation InstructionsBlower Wheel WiringTo clean blower wheel Blower Motor

SR-30 specifications

Empire Comfort Systems has established itself as a leading manufacturer of heating appliances, and the SR-30 gas stove is a testament to its dedication to quality and efficiency. This model is designed to seamlessly blend comfort with modern aesthetic appeal, making it an ideal choice for various living spaces.

The Empire SR-30 boasts a compact design that measures 30 inches in height, making it suitable for both small and larger rooms. One of its main features is the ability to provide heat without the need for electricity, thanks to its reliable gas-burning technology. This characteristic ensures that the stove can function during power outages, providing peace of mind and warmth even in unpredictable weather conditions.

Equipped with state-of-the-art burner technology, the SR-30 delivers an impressive heat output, ranging between 20,000 and 30,000 BTUs, capable of effectively warming spaces up to 1,200 square feet. The unit is designed with a built-in thermostat and adjustable flame control, allowing users to customize the heat output according to their comfort preferences.

Safety is a priority with the SR-30, which features a safety shut-off system designed to prevent gas leaks and ensure safe operation. The unit is also equipped with a venting system that promotes effective heat distribution while minimizing draft issues, providing a consistent and cozy warmth throughout the room.

The aesthetic design of the SR-30 is another standout feature. With a range of attractive finishes and an array of customizable options, consumers can choose a style that complements their home décor. The large glass viewing area offers a warm, flickering flame, creating an inviting atmosphere that enhances any space.

In terms of installation, the SR-30 is versatile, as it can be direct-vented or installed using a one-pipe venting system, providing options for various home configurations. Additionally, the unit operates quietly, ensuring it will not disrupt conversations or relaxation.

In conclusion, the Empire Comfort Systems SR-30 gas stove is an excellent choice for homeowners seeking an efficient, reliable, and stylish heating solution. With its powerful heating capabilities, safety features, and elegant design, the SR-30 adds warmth and charm to any living environment.