Hubbell Electric Heater Company T manual Hubbell Electric Heater Company, Box, Stratford, Ct

Page 2

HUBBELL

ELECTRIC HEATER COMPANY

P.O. BOX 288

STRATFORD, CT 06615

PHONE: (203) 378-2659

FAX: (203) 378-3593

INTERNET: http://www.hubbellheaters.com/

-- IMPORTANT --

Always reference the full model number and serial number when calling the factory.

WARNING / CAUTION

1.Tank is to be completely filled with water and all air is to be vented before energizing.

2.Due to the rigors of transportation, all connections should be checked for tightness before heater is placed in operation.

3.Safety relief valve must be installed in tapping provided.

4.KEEP AWAY FROM LIVE ELECTRICAL CIRCUITS.

Do not perform any maintenance, make any adjustments, or replace any components inside the control panel with the high voltage power supply turned on. Under certain circumstances, dangerous potentials may exist even when the power supply is off. To avoid casualties, always turn the power supply safety switch to off, turn the charge or ground the circuit before performing any maintenance or adjustment procedure.

5.The unit is designed to operate at pressure not more than 150 psi.

6.Generalized instructions and procedures cannot anticipate all situations. For this reason, only qualified installers should perform the installations. A qualified installer is a person who has licensed training and a working knowledge of the applicable codes regulation, tools, equipment, and methods necessary for safe installation of an electric resistance water heater. If questions regarding installation arise, check your local plumbing and electrical inspectors for proper procedures and codes. If you cannot obtain the required information, contact the company.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Electric Heater Company STRATFORD, CT Hubbell Electric Heater CompanyBOX Table of Contents Section Title Page Tank Connections Section I General Description and ConstructionTank Outer Shell and InsulationBack-up Electric Heating Element Control ThermostatOptional BACK-UP Electric Heating System Control ThermostatTemperature High Limit Switch Water Heater Placement Install the Heat Exchanger CoilPiping Installation Page Final Checks Electrical InstallationFilling the Heater Freezing Section III Scheduled Maintenance and OperationMaintenance and Operation Quarterly InspectionAnnual Inspection Section IV Troubleshooting Symptom Probable Cause Corrective Action / RemedyPage Section V Servicing & Replacement of Parts Relief ValveHeating Coil Surface Temperature High Limit CUT-OFF if supplied Immersion Temperature High Limit CUT-OFF if supplied Heating Element if supplied Page Page Surface Mounted Thermostat if supplied Immersion Thermostat if supplied Section VI Miscellaneous Charts and Formulas Model Coil Curves

T specifications

Hubbell Electric Heater Company T is a renowned manufacturer in the heating industry, recognized for its innovative and high-quality electric heating solutions. Operating since the mid-20th century, the company has built a reputation for reliability and efficiency, catering to various markets, including industrial, commercial, and residential applications.

One of the main features of Hubbell Electric Heater Company T products is their robust construction. The heaters are designed to withstand extreme conditions, making them suitable for use in demanding environments. This durability is complemented by a wide range of wattage options, allowing users to select the appropriate heating capacity for their specific needs.

The technology behind Hubbell electric heaters showcases advanced engineering to enhance performance and energy efficiency. Many of their models are equipped with digital controls, allowing for precise temperature regulation and the ability to set timers for increased convenience. This smart technology not only improves comfort levels but also contributes to energy savings, making the heaters more eco-friendly and cost-effective over time.

Hubbell Electric Heater Company T employs various heating methods, including convection, radiant, and fan-forced systems. Convection heaters are particularly popular for their ability to heat an entire room evenly, while radiant heaters provide immediate warmth through infrared energy, ideal for spot heating. The fan-forced designs are perfect for large spaces, efficiently distributing heat quickly throughout the area.

Another key characteristic of Hubbell's products is their versatility in installation. The heaters can be mounted on walls, ceilings, or used as portable units depending on the model. This adaptability makes them suitable for different applications, from workshops and warehouses to residential homes and outdoor settings.

Safety is a paramount focus for Hubbell Electric Heater Company T. Their products come integrated with various safety features such as over-temperature protection and tip-over switches, ensuring peace of mind during operation. The company adheres to stringent industry standards and regulations, providing customers with products that not only perform well but also ensure user safety.

In summary, Hubbell Electric Heater Company T stands out in the market with its durable, efficient, and versatile electric heating solutions. By leveraging advanced technologies and prioritizing user safety, the company continues to innovate and meet the evolving needs of its diverse clientele. Whether for industrial or residential use, Hubbell electric heaters provide reliable warmth and comfort, making them a trusted choice in the heating industry.
Top Page Image Contents