Enerco MH12CS owner manual Thermocouple Face Gaurd Heater Relector, HOOK-UP Information

Page 3

HOOK-UP INFORMATION

1.1Heater models MH12C and MH12CS are packaged completely assembled except for metal stand. Propane cylinders are not included with models MH12C and MH12CS.

1.2Remove heater from carton.

1.3Hold heater in one hand and with the other hand hold propane cylinder vertically and carefully turn clockwise into heater valve-regulator until snug. (Careful not to cross-thread)

– Fig. 1 and Fig. 2.

1.4Use only LP-gas cylinders constructed for use with propane only (HD-5) and marked in accordance with the specifications for LP-gas cylinders of the U. S. Department of Transportation (DOT Spec. 39).

1.5Use propane fuel cylinders of not more than 75 cubic inches (2-1/2 pounds nominal water capacity) and connect to cylinder valve outlet connection No. 600 as specified in the Compressed Gas Associations Limited Standard Cylinder Valve Outlet Connection for propane-small valve series.

2.1Grasp heater model by cylinder and hold wire stand with other hand. Slide mounting clip on back of heater onto chrome plated wire stand. Fig. 1 and 2.

2.2Push igniter lead onto end of Sparklite Igniter on Model MH12CS-Figure 2.

2.3Make sure wire stand is on a flat surface in the outdoors. See paragraph 5 for additional assembly procedure.

2.4 WARNING

Never touch heater while in operation to avoid injury. Move heater by grasping the propane cylinder carefully.

2.5 Read pages 3 and 4 before lighting heater.

THERMOCOUPLE

FACE GAURD

HEATER

RELECTOR

MODEL MH12C

VALVE/REGULATOR/#F273607

PUSH BUTTON

SAFETY SHUTDOWN VALVE

KNURLED LOCK NUT

CYLINDER - NOT SUPPLIED

WIRE STAND

Figure 1

IGNITER LEAD

SPARKLITE IGNITER

MODEL MH12CS

Figure 2

Mr. Heater Gas-Fired Infra-Red Portable Heater

3

Operating Instructions and Owner’s Manual

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model MH12CS MH12C MH12CSGeneral Hazard Warning ContentsHOOK-UP Information Thermocouple Face Gaurd Heater RelectorOdor Fade Warning General InformationFor Safe Operation Model MH12C Model MH12CS Assembly ProcedureVentilation Cooking PositionsLighting Instructions Model MH12CModel MH12CS Replacement Parts List for Heater Models MH12C and MH12CS ALL Warranty Claims Require Proof of PurchaseREF.# ITEM# Description For Information Regarding Service Limited WarrantyParts Ordering Information

MH12CS, MH12C specifications

The Enerco MH12CS and MH12C are highly regarded portable heaters designed for both residential and commercial settings. Renowned for their durability, efficiency, and user-friendly features, they have become popular choices for those seeking reliable heating solutions.

One of the standout features of the MH12CS and MH12C is their powerful heating capability. With an output of up to 12,000 BTUs, these heaters can efficiently warm spaces of various sizes, making them suitable for garages, workshops, job sites, and even outdoor events. Their robust heating performance ensures that users stay comfortable in colder temperatures, significantly enhancing productivity in work environments.

In terms of design, both models are built with a strong emphasis on portability. The heaters are lightweight and equipped with convenient carrying handles, allowing for easy movement from one location to another. The compact design also means that they can be stored away neatly when not in use, without taking up much space.

Another notable characteristic is the dual-fuel capability of the MH12CS. This model can operate on either propane or natural gas, providing flexibility depending on the available fuel source. Users can switch between fuel options as needed, ensuring uninterrupted heating even if one fuel supply runs low. The MH12C, on the other hand, focuses on natural gas operation, making it a cost-effective solution for those with gas lines already installed.

Safety is a primary concern with any heating device, and Enerco addresses this with multiple features to ensure user security. Both the MH12CS and MH12C are equipped with a built-in safety shut-off system that activates in the unlikely event of overheating, preventing potential hazards. Additionally, their construction includes a sturdy housing designed to withstand rugged usage, enhancing overall durability.

Another technological advancement is the variable heat settings. Users have the flexibility to adjust the heat output to their preference, enabling them to manage fuel consumption effectively while maintaining comfort. This feature allows for efficient heating without unnecessary energy waste.

In conclusion, the Enerco MH12CS and MH12C portable heaters stand out for their powerful performance, versatility, and safety features. Whether for work or leisure, these heaters provide reliable warmth, making them a valuable addition to any heating toolkit.
Top Page Image Contents