G. Mounting kits and accessories | English |
!Hazard!
The following mounting and accessory kits must not be used for operation with solvents or in a hazardous (potentially explosive atmosphere) area.
1.Mounting kits
Float tank with float valve
Function
The float valve fitted inside the float tank controls the level of liquid.
The float tank serves as a service reservoir for the cleaning liquid.
If water is used as the cleaning agent, the float tank corresponds to mains disconnection according to EN 1717.
In the case of the mobile systems, the float tank is fitted to the trolley.
Settings |
Closing force
Extending the length of L increases the amount of closing force, i.e. even when the cleaning liquid is fed in at quite high pressure the float valve is able to shut off the supply.
Technical specification
Capacity up to overflow: 30 litres.
Volume control valve
Function
If only a part of the pump delivery volume is required, the remainder is fed back to the suction side of the pump via the volume control valve.
This item is required when the system is used with handguns.
Pressure switch
!Danger!
Danger due to high voltage. The pressure switch has been
Function
The pressure switch
switches the system off if the working pressure is exceeded.
switches the system back on when the pressure drops again.
Pulsation damper
Caution!
As the membrane in the pulsation damper is not suitable for solvents, do not use the pulsation damper for operation with solvents.
Function
The pulsation damper evens out variations or peaks in pressure while the system is in operation.
i Important!
Volume control valve, pressure switch and pulsation damper are usually employed together as an automatic volume control system.
G1 |