Karcher SHD-R 3000 manual Using the system for its intended purpose

Page 6

English

A. For your safety

SHD-R 3000

8.Using the system for its intended purpose

This system is used for pumping a cleaning liquid at high-pressure, for the purpose of:

„with the handgun attached – cleaning containers, boxes, cases and equipment parts, etc.

„with the interior cleaner attached – cleaning enclosed containers, drums, barrels, etc.

Cleaning the following is considered to be contrary to the intended purpose, and is strictly forbidden:

„Persons and animals

The high-pressure jet represents a serious injury hazard.

„Loose objects

Such items could be catapulted away by the high-pressure jet, causing damage to property or injury to persons.

If water is used as the cleaning liquid, the system must be protected against freezing temperatures. Damage could be caused if water freezes inside the system.

9.Special Conditions in a hazardous area

1.The pump may only be used in zones which correspond to the type of explosion protection given on the rating plate.

2.The cleaning liquid must not contain more than 1% by weight of undissolved solids.

3.The interior cleaner must be electrostatically grounded.

4.The cleaning liquid pump may only be run if it is filled with liquid.

5.The nominal pressure of the pump must not exceed 50 bar when used with solvents.

6.The pump's flow rate must not exceed

50l/min when used with solvents.

7.The operating temperature of the cleaning liquid, made up of water with cleaning agent, must not exceed 60 °C.

8.The operating temperature of the cleaning liquids must not exceed 20 °C where solvents, lyes (alkali solutions) and acids are used.

9.The pump must be inspected after a reasonable operating time to ensure it has a faultless condition and function (among other things, bearings for wear, pump for leaks, tension in the V-belt). Repair if necessary.

10.The pump may only be operated with cleaning liquids against which the materials from which the pump is made have adequate resistance.

11.Cleaning liquids, which contain combustible solvent fractions, must correspond to the temperature classes IIA and IIB. Solvents in the temperature class IIC must not be sprayed.

12.The pump may only be operated in Zone

1during cleaning. Ensure compliance with the conditions applicable within the scope of the BetrSichV (industrial safety regulations) and other national conditions.

13.Hoses must be electrostatically conductive (resistance R < 1 MΩ ).

14.Only use cleaning liquids with a conductivity G > 1000 pS/m.

15.All parts in contact with the media are to be connected to the earth connection system.

16.The electric motor used must have a prescribed type testing certificate to 94/9/EC.

A3

5.956-486 A2005937 (06/03)

Page 5 Page 7
Image 6
Page 5 Page 7
Contents SHD-R 3000 Betriebsanleitung 956-486 A2005937 06/03Operating Instructions For whom are these instructions intendedEnvironmental protection Table of contents Noise protection For your safetySafety information and instructions Authorized operatorsEmergency drill Safety devicesSafety valve Applicable regulationsUsing the system for its intended purpose Special Conditions in a hazardous areaSchematic diagram of area classification Area Classification ZoneSHD-R 3000 B. Types of system, and operating information Types of systemStatic or mobile systems Types of system, and operating information SHD-R 85/100 Pistons are made Alkali Solutions Solvents Types of system, and operating information SHD-RSystem start-up System shut-downSystem functions Drive for the high-pressure pump Features of the high-pressure pumpOperational sequence of the high- pressure pump Pulsation damperTechnical specifications Motor rating with„ Customer service Care and maintenanceWho is permitted to carry out maintenance tasks? „ Operator Maintenance agreementMaintenance schedule Frequency Type of pump SHD-R Action Procedure By whom?Care and maintenance Tightening the piston seals Maintenance tasksChanging the oil Relieving tension on piston sealBelt Troubleshooting Who is permitted to repair faults on the system? „ Operator„ Qualified electrician Troubleshooting Troubleshooting Pressure switch Mounting kits and accessoriesVolume control valve Pulsation damperDetergent metering at the suction side of the pump AccessoriesPressure-relief valve Detergent metering at the pressure side of the pumpFigure a 170/1 Figure a Mounting kits and accessories Mounting kits and accessories Mounting kits and accessories Warranty Connecting hoses for supply of cleaning liquid System installationPreparing the installation site Unpacking the systemDimensional diagram EC Declaration of Conformity Product High-pressure cleaner Type SHD-R 3000 F, S, SVADeclaration of Conformity 957-383 01/02EC Machinery Directive 98/37/EC EC Atex Directive 94/9/EC DIN EN 60 335 DIN EN 13463 1 PrEN 13463 5 EN 1127 1957-384 06/03 Test record

SHD-R 3000 specifications

The Karcher SHD-R 3000 is a powerful and versatile high-pressure cleaner designed for both professional and home use. This model stands out for its ergonomics, efficiency, and advanced technology, aimed at meeting the demanding cleaning needs across various environments.

One of the prominent features of the Karcher SHD-R 3000 is its robust motor, providing a high flow rate and pressure, making it capable of tackling tough grime, dirt, and grease. With an operating pressure of up to 3000 PSI, it excels in delivering exceptional cleaning results on a variety of surfaces, from vehicles and patios to industrial machinery.

Equipped with cutting-edge technology, the SHD-R 3000 includes an automatic pressure adjustment feature. This ensures that the machine adapts the pressure output according to the cleaning task at hand, enhancing efficiency and prolonging the lifespan of the machine. Additionally, it utilizes a unique detergent injector system that allows for the quick and easy application of cleaning agents. This feature not only boosts cleaning performance but also saves time and effort during the cleaning process.

In terms of design, the Karcher SHD-R 3000 is engineered with user comfort in mind. Its lightweight construction allows for easy portability, while the integrated wheeled cart provides stability and ease of movement. The ergonomic handle and trigger reduce operator fatigue, making it suitable for extended use.

Another noteworthy characteristic of this model is its versatility. Karcher offers a range of nozzles and attachments compatible with the SHD-R 3000, enabling users to customize their cleaning experience. Whether it's a wide fan spray for larger surfaces or a narrow jet for detailed cleaning, users can adjust their approach to fit the task effectively.

The SHD-R 3000 also incorporates an advanced cooling system that prevents overheating, ensuring uninterrupted operation even during prolonged use. Enhanced safety features, like thermal protection and a robust frame, guarantee a secure working environment.

Overall, the Karcher SHD-R 3000 is a combination of power, innovation, and user-friendly design. It's an ideal high-pressure cleaner for those looking to achieve professional-grade results while enjoying the convenience and ease of operation. Whether for car detailing, patio cleaning, or larger scale commercial jobs, the SHD-R 3000 is equipped to meet and exceed expectations, making it a valuable addition to any cleaning toolkit.
Top Page Image Contents