Wet-vacuuming

Operating instructions

NT 65/2 Eco *VEX

English

!Remove the paper filter bag

!Insert power plug

!To deactivate Power Filter Clean

!Switch on the machine and start using it

To deactivate Power Filter Clean

Slider (1) position - up.

Note:

—It is advisable to deactivate the - Power Filter Clean - function when vacuuming with the upholstery or crevice nozzle or if predominantly water is to be sucked out of a container.

Upon reaching the maximum liquid level the unit automatically turns itself off.

!Switch the appliance off and empty the container.

Automatic shutoff is reset by turning off the unit.

!Clean and dry the flat pleat filter and the electrodes as well as the container after finishing wet vacuuming jobs.

!Drain dirty water using the drain (not provided for all units)

Warning!

—During vacuuming it is not permitted to ever remove the flat pleated filter.

—The paper filter bag and the membrane filter (optional accessories) respectively must always be removed for vacuuming wet dirt. The use of a special filter bag (wet type) is recommended

(see filter systems).

—The unit does not switch off when the container is full when non-conductive liquids (e.g. drilling emulsion, oils and greases) are vacuumed. The fill level must be regularly checked and the container emptied before it is too full.

—On request, the unit can be retrofitted by maintenance service with a shutoff for dielectric liquids.