Karcher RC 3000 manual Cleaning the brush

Page 13

Maintenance and Care

Removing the brush

•Open the dirt receptacle.

•Then, pull the brush out of the right-handed guide (1).

•Afterwards, pull the brush out of the lateral support (2).

Cleaning the brush

The dirty brush is automatically cleaned during each cleaning operation in the station. You can manually remove remaining hairs and wrapped up threads.

•Use a pair of scissors to cut along the cutting edge of the brush roll.

•Remove the wrapped up threads/hairs.

Exchanging the brush

If the bristles are worn out, you must replace the brush.

Inserting the brush

•Insert the brush into the support on the left side (1).

•Press the brush into the right-hand guide until it locks into place (2).

Figure 20: Removing the brush

Figure 21: Cleaning the brush

Figure 22: Inserting the brush

Cleaning the dust sensors

• Clean the dust sensors using a soft cloth or a paintbrush.

Figure 23: Cleaning the dust sensors

Finish all maintenance works of the robot with the following steps:

Installing the dirt receptacle cover

•Put the cover onto the dirt receptacle.

•Close both locking levers.

•In addition, press on the front side of the cover to ensure the dirt receptacle is closed safely.

Figure 24: Installing the dirt receptacle cover

Figure 25: Closing the locking lever

Exchanging the batteries

• Release the two screws on the two batteries, and remove the old batteries.

• Insert the new batteries, and fasten them with the screws.

Please arrange for the proper disposal of the batteries. Batteries contain substances that must not enter the environ- Figure 26: Exchanging the batteries ment. Please dispose of your batteries using appropriate collec-

tion systems. Use only original Kärcher batteries.

RC 3000

English – 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model RC 3000 Cleaning robot Operator Manual Manuel d’utilisation ContentsManual del Operador English Important Safety Instructions General Safety Instructions Quick Reference Assembling the RC Starting the RC Indicator lampsOperating Controls Hour-cleaningThis appliance is intended For household use only Installation Notes for the Station Installing the Access RampPreparation UnpackingIndicator lamps Turn on the station switchInitial Operation Turning the Robot OffQuiet Mode Selecting the Cleaning DurationOperation ParkingTips and Tricks Station Maintenance and CareRobot Open the filter coverCleaning the brush Problem Signal Consequence Solution TroubleshootingWarranty SpecificationsFor which type of floor coverings can I use the robot? Frequently Asked QuestionsHow do pets react to the robot?

RC 3000 specifications

The Karcher RC 3000 is a cutting-edge robotic cleaner designed to tackle various floor cleaning tasks with remarkable efficiency. Engineered to meet the needs of both residential and commercial spaces, this innovative cleaning solution seamlessly integrates advanced technology with user-friendly functionalities.

One of the standout features of the Karcher RC 3000 is its intelligent navigation system. Equipped with state-of-the-art sensors, the robotic cleaner autonomously maps its environment, allowing it to navigate complex spaces without human intervention. This technology enables the RC 3000 to efficiently avoid obstacles and adapt its cleaning path according to the layout of the area, ensuring comprehensive coverage.

Another key characteristic of the Karcher RC 3000 is its powerful suction capability. The device boasts a robust motor that generates optimal suction power, effectively picking up dirt, dust, and debris on various floor surfaces including carpets, tiles, and hardwood. The RC 3000 also features dual-side brushes that enhance its cleaning performance by reaching into corners and along edges where dust tends to accumulate.

The Karcher RC 3000 incorporates advanced filter technology to ensure that not only dirt and debris are captured, but also fine particles and allergens. This feature is particularly beneficial for households with allergy sufferers, as it creates a cleaner and healthier living environment.

Another highlight of the RC 3000 is its user-friendly interface. The device can be easily programmed via a mobile app, allowing users to customize cleaning schedules, choose specific cleaning modes, and monitor progress from their smartphones. This connectivity enhances the user experience, making it easy to control cleaning operations from anywhere.

The battery life of the Karcher RC 3000 is commendable, with a runtime sufficient to cover large areas on a single charge. When the battery runs low, the robotic cleaner automatically returns to its charging dock to recharge, ensuring it is always ready for the next cleaning session.

In summary, the Karcher RC 3000 stands out as an advanced robotic cleaner that combines intelligent navigation, powerful suction, advanced filtration, and user-friendly controls. Whether for home or business use, the RC 3000 delivers an efficient and effective cleaning solution, simplifying maintenance and enhancing cleanliness in various environments. Its blend of robust performance and smart technology makes it a valuable addition to any cleaning toolkit.
Top Page Image Contents