JVC GR-DVL9000 manual Pull OUT Viewfinder or Open LCD Monitor, Start Recording, Stop Recording

Page 21

1 SELECT OPERATION MODE

Set the Power Dial to “ A ” while pressing down the lock button located on the dial.

2 PULL OUT VIEWFINDER OR OPEN LCD MONITOR

Pull out the viewfinder fully or open the LCD monitor to approx. 90° degrees.

•The lens cover opens, the power lamp comes on and the scene you're aimed at appears.

•The Record-Standby mode is engaged.

3 START RECORDING

When “PAUSE” appears, press START/STOP. A beep signals the start of recording and the tally lamp comes on.

4 STOP RECORDING

Press START/STOP again to stop recording.

•The camcorder re-enters Record-Standby mode.

5 END RECORDING

When you’re finished recording, push back the viewfinder or close the LCD monitor until it clicks; the lens cover closes and the power lamp goes out.

•When transporting, make sure the viewfinder is pushed back and the LCD monitor is closed and locked.

•To turn power on again, pull out the viewfinder or open the LCD monitor.

OR

Set the Power Dial to “OFF”.

•When turning to “OFF”, it is not necessary to press down the lock button.

EN21

NOTES:

●The image will not appear simultaneously in the LCD monitor and the viewfinder. No image appears on the LCD monitor when the viewfinder is pulled out. It is not possible to shoot using both

LCD monitor and viewfinder. However, during Interface Shooting (☞ pg. 25) the image appears simultaneously in the LCD monitor and the viewfinder.

●If 5 minutes elapse in the Record-Standby mode, power shuts off automatically to conserve energy and protect the heads. To turn the camcorder on again, push back and pull out the viewfinder again or close and re-open the LCD monitor. As long as you don’t take out the tape you were using or play it back, you can continue from where you left off with no noticeable brake on the recorded video.

●When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors may occur when editing the tape.

Continue recording from where you stop so there

are no gaps by following "Recording from the middle of a tape" (☞ pg. 22).

●Record-Standby means that a tape is loaded and the camcorder is ready to record.

●During recording, sound is not heard from the speaker. If you want to hear the sound, connect optional headphones to the headphones jack. The sound volume at this point is the same as the level it was adjusted during playback.

●To make the indications disappear, press and hold the ON/OFF button for more than approx. 1 second. However, it is impossible to remove the

tape running indicator “ 444” and warning indications and so on (☞ pg. 83).

●Use the viewfinder when under direct sunlight or when reflections make it difficult to see the LCD monitor.

Page 20 Page 22
Image 21
Page 20 Page 22
Contents For Customer Use GR-DVL9000It is recommended that you Dear CustomerPower Cord Protection Ventilation Power SourcesPower Lines Grounding or PolarizationDamage Requiring Service AccessoriesReplacement Parts Safety CheckDV mark Safety PrecautionsDVM-30 M-DV30ME RM-V711UVIDEO/AUDIO cable Mini-plug 4RCA plugCD-ROM Video cable DC cordJlip Video Capture MGI PhotoSuite SESub-Code Area Video Area Audio AreaITI Insert and Tracking Information Area Contents Charging The Battery Pack Open Battery Cover Installing The Battery PackInsert Charged Battery Close Battery CoverAC Power Using The Power PackIndoor Use Attach to CamcorderSelect Operation Mode Date/Time SettingsInput Date and Time LCD monitorOpen LCD Monitor Loading/Unloading a CassetteOpen Cassette Cover INSERT/REMOVE TapeSET Recording Mode Recording Mode SettingSet depending on your preference Select DialGrip Strap Attachment Adjust LengthTripod Mounting Bottom of the camcorderAdjust Diopter Diopter AdjustmentShoulder Strap Attachment Attach Shoulder StrapInstalling The Battery Remote Control UnitRE-INSERT Holder FADE/WIPE Button pgOperation Mode Power Dial PositionFunction Display EN RecordingStart Recording Pull OUT Viewfinder or Open LCD MonitorStop Recording END RecordingPower lamp comes on Engage Still ModeRecording From The Middle Of a Tape Start SearchTime Code When blank portion is recorded on a tapeProper recording During shootingAdjust Brightness Tape Remaining IndicatorBrightness Control Select Dial ON/OFF buttonJournalistic shooting Interface ShootingTilt LCD Monitor Zoom Select Function Displaying The Date And Time During RecordingDissolves during 5 second mode recording Engage 5S ModePull out the viewfinder fully S Mode appears Scene 5-second recordingEngage SELF-TIMER Mode Self-TimerStop SELF-TIMER Recording END SELF-TIMER RecordingPro Snapshot Take PRO SnapshotPress the Progressive Button Snapshot Button Motor Drive mode Progressive ModeWhen you dont want to hear the shutter sound Frame Description of Progressive Scan CCDClose Recording Menu MenusRecording Menu allows you to set these functions Please refer to pages 34, 35 for detailsWide Mode REC Mode Recording modeDIS Digital Image Stabilizer Zoom Zoom magnificationAccess System Menu System MenuClose System Menu Return Sound signals can be sampled at 32 kHz or 48 kHzAccess FADER/WIPE Menu Accessmenu Manual Mode ItemTo Cancel FADE/WIPE Effects FADE/WIPE EffectsExample Fades and WipesFader White Example Wipe ScrollPicture Wipe/Dissolve Resume RecordingP and P of the Fader/Wipe Menu WH BK B W Random VariationsFade in or out with a black screen Fade in or out with a white screenOut from color to black and white ScreenDisappears New scene gradually appears as the old one graduallyNew scene wipes in over the previous one from the upper Right corner to the lower left cornerSelected mode appears Disable P.AE/EFFECTAE/Effects Press START/STOP. The image begins with the selected effectStrobe Classic FilmTwilight SepiaProgressive Video Recording Access Manual Focus Manual Focus AdjustmentAdjust Focus To Change To Auto FocusExposure Control Adjust ExposureBrightness control of the LCD monitor To Return To Automatic Exposure ControlIris Lock After , adjust the exposure rotatingTo Return To Automatic Iris Control IrisAccessment White Balance Adjust White Balance AdjustmentClosement White Balance Adjust Select Auto in . Or set the Power Dial toExit Manual White Balance Adjustment Enter SettingManual White Balance Operation To Change The Tint For RecordingRewind Tape Volume switchViewing Recording END PlaybackTo Perform High-Speed Search Press 2 or 3 after pressing 6/4. The tapeHigh-Speed Search. This is not a malfunction Activate Zoom Playback ZoomLocatescene Portion of Magnified END ZoomPlayback Effects Select P.AE/EFFECTRM-V711U Provided Playback Menu Access Playback MenuClose Menu Playback Menu allows you to set the following functionsPlayback Sound Displaying the Date During PlaybackDisplaying The Time Code During Playback VCR/TV Connection EN Playback Basic ConnectionsSelect TV’S Video Mode Turn on PowerConnection To a Personal Computer Supply PowerAC Power Adapter Charger Connection To a Video Unit Equipped With a DV ConnectorTo DV in connector While pressing down the lockMake Connections DubbingStart Playback Pause RecordingDigital Dubbing Brand Setting Operate the VCRRM-V711U 7 8 9 ` provided Execute FADE/WIPE in if Necessary Random Assemble EditingSET EDIT-IN Point SET EDIT-OUT PointUSE P.AE/EFFECT if Necessary Engagemode Vcrs RECORD-PAUSE Start EditingStop Editing Prepare for R.A. Edit Play Back Dubbed Scene For More Accurate EditingChoose a Scene Random Assemble Editing Menu appearsInput Correction Data Adjustment of VCR‘s against Camcorder TimingFind EDIT-IN Point Audio DubbingBegin Dubbing Pause During DubbingFind Edit OUT Point Insert EditingFind Edit in Point Pause During EditingDon’t work Tape END appearsFor editing was registered During Digital ZoomRed or black for an instant Mode is set to OFFThere are disturbances in audio and video When the LCD monitors Fluorescent light reachesAngle of the LCD monitor WhitishMonitor Precision technology LCD monitor Certain FADE/WIPE, P.AE Indications blinkLCD monitor or Camcorder’s functions If the indication remainsCleaning The Camcorder Pull this out to open Connector coverReset button pg External microphone input connector MIC Stereo pgOPEN/EJECT switch pg Power dial pgVideo OUT connector pg Cassette cover pg DV OUT connector pg , 61Battery cover pg Battery cover open switch Battery pgFunction LCD Monitor/Viewfinder Indications During RecordingLCD Monitor/Viewfinder Indications During Playback Indications Function Plug adapter To prolong service lifeTo avoid hazard During useAvoid using the unit For safety, do notDo not leave the unit To protect the unit, do notTrade Name Declaration of Conformity Model NumberResponsible party AddressPower consumption PowerSignal format Video signal recording formatAC Adapter Color temperatureAuto focus On-screen displaySecond Mode Fade-In/Out Motor Drive ModeAnimation Audio Dubbing Connections Pg , 58 Date/Time Display90ENMEMO Memoen GR-DVL9000
Related manuals
Manual 88 pages 43.66 Kb

GR-DVL9000 specifications

The JVC GR-DVL9000 is a standout product in the realm of digital camcorders, showcasing a blend of advanced technology and user-friendly features. Released as part of JVC's line of DV camcorders, it quickly gained popularity among consumers seeking high-quality video recording without compromising on style and functionality.

At the heart of the GR-DVL9000 is its impressive 1/4-inch CCD sensor, which delivers a resolution of 800,000 pixels. This sensor ensures that the camcorder captures vibrant colors and sharp details, allowing users to record their precious moments in stunning clarity. Its capability to offer a 16:9 aspect ratio enhances the cinematic experience, making it particularly appealing for filmmakers and enthusiasts looking to achieve a more professional look in their videos.

The GR-DVL9000 employs JVC's advanced DV format, which offers superior video quality compared to traditional analog formats. This digital advantage is further amplified with the incorporation of 3D Digital Noise Reduction technology, ensuring clean and smooth playback, even in low-light conditions. The camcorder also supports a range of recording modes, allowing flexibility for various shooting environments, whether indoors or outdoors.

One of the key characteristics of the GR-DVL9000 is its user-centric design. The camcorder features an easy-to-navigate menu system and an ergonomic grip that enhances comfort during prolonged use. The large 3.5-inch LCD screen provides real-time feedback, making it easy to frame shots accurately and review recordings without straining the eyes.

Additionally, the GR-DVL9000 includes a 20x optical zoom lens, enabling users to get close to the action without sacrificing image quality. This is particularly useful for nature documentaries, sports events, or any scenario where capturing distant subjects is vital.

Connectivity options are also a highlight of this device. The camcorder includes both FireWire (IEEE 1394) and USB ports, allowing for seamless transfer of videos to computers for editing and archiving. This ease of connectivity underscores the GR-DVL9000’s suitability for both casual users and those who take their videography seriously.

In conclusion, the JVC GR-DVL9000 stands out with its combination of a strong CCD sensor, advanced digital recording capabilities, user-friendly design, and robust connectivity options. Whether for personal use or professional projects, it remains a compelling choice among digital camcorders, epitomizing JVC's commitment to quality and innovation in videography.
Top Page Image Contents