JVC GR-DVL9000 manual Mode is set to OFF, Red or black for an instant

74EN

TROUBLESHOOTING(Cont.)

SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION

18.The Picture Wipe and Dissolve functions don’t work.

18.•The last selected editing scene is ending.

•At the end of the last selected scene for editing, the Power Dial was set to “OFF”.

•The power is off.

18.• Select Picture Wipe or Dissolve before beginning recording. The effects are

then automatically activated (☞ pg. 40).

•Do not turn off the camcorder’s power after setting Edit-In and Edit-Out

points, as they will all be erased (☞ pg. 40).

•The camcorder automatically shuts off after 5 minutes have elapsed in the Record- Standby mode. Make sure you continue operations within

5 minutes after engaging

Record-Standby mode (☞ pg. 40).

19. The Picture Wipe function	19. •The Slow Shutter effect is	19. • Make sure the Squeeze
doesn’t work.	activated.	mode, Cinema mode, or
	•The Squeeze or Cinema	Slow Shutter effect is not
	mode is selected in the	activated when preparing
	Recording Menu.	to use the Picture Wipe
		function
		(☞ pg. 34, 45).
20. Even when Slow Shutter	20. •When shooting in the dark,	20. • If you want the lighting to
isn't selected, the image	the unit becomes highly	look more natural, set
looks like it is activated.	sensitive to light and the	GAIN UP to “AGC” or
	image takes on an effect	“OFF” in the Recording
	similar to Slow Shutter.	Menu (☞ pg. 34).
21. The Video Echo effect	21. •The Picture Wipe or	21. • Make sure the Squeeze
doesn’t work.	Dissolve functions are in use.	mode is set to “OFF”
	•The Squeeze mode is	(☞ pg. 34).
	selected in the Recording	• Do not try to use the Video
	Menu.	Echo effect during a
	•A Fade-In or Fade-Out is in	Fade-In or Fade-Out
	progress (White Fader, Black	(☞ pg. 38).
	Fader or Black & White
	Fader).
22. There is no strobe when	22. •The Picture Wipe or	22. • Do not try to use the
the Classic Film or Strobe	Dissolve function is in use.	Classic Film or Strobe
effect is activated.		effect during a scene
		transition (☞ pg. 45).
23. White Balance cannot be	23. •The Sepia or Monotone	23. • Turn off Sepia or Monotone
activated.	effect is activated.	before setting White
		Balance (☞ pg. 44).
24. When shooting a subject	24. •This is a result of	24.
illuminated by bright	exceedingly high contrast,	————
light, vertical lines appear.	and is not a malfunction.
25. When the screen is under	25. •This is not a malfunction.	25.
direct sunlight during		————
shooting, the screen becomes

red or black for an instant.