Goodman Mfg Multi-Position, Two-Stage/Variable-Speed Gas Furnace Specifications, GMV95, GCV9

PRODUCT SPECIFICATIONS

SPECIFICATIONS

	GMV95	GMV95	GMV95	GMV95-	GCV9	GCV9	GCV9
	0453BXB	0704CXB	0905DXB	1155DXB	0704CXB	0905DXB	1155DXA
Heating Capacity
High Fire Input¹	46,000	69,000	92,000	115,000	69,000	92,000	115,000
High Fire Output¹	45,000	67,000	90,000	109,000	65,000	87,000	109,000
Low Fire Input¹	32,000	48,000	64,000	80,000	48,000	64,000	80,000
Low Fire Output¹	30,800	46,400	61,700	77,400	45,000	60,100	77,400
AFUE²	95	95	95	95	93	93	93
Tons AC @ 0.5” ESP	1.5 - 3.0	1.5 - 4.0	2.0 - 5.0	2.0 - 5.0	1.5 - 4.0	2.0 - 5.0	2.0 - 5.0
Temperature Rise Range (°F)	30 - 60	30 - 60	30 - 60	30 - 60	30 - 60	30 - 60	40-70
Circulator Blower
Size (D x W)	10” X 7”	10” X 10”	11” X 10”	11” X 10”	10” x 10”	11” X 10”	11” X 10”
Horespower @ 1750 RPM	½	¾	1	1	¾	1	1
Speed		Variable				Variable
Vent Diameter³	2”	2”	3”	3”	2”	3”	3”
No. of Burners	2	3	4	5	3	4	5
Filter Size (in²)
Disposable	288	384	480	486	384	480	486
Permanent	576	768	960	972	768	960	972
Electrical Data
Min. Circuit Ampacity (amps)4	10.4	12.8	14.6	14.6	12.8	14.6	14.6
Max. Overcurrent Protection5	15 amps	15 amps	15 amps	15 amps	15 amps	15 amps	15 amps
Ship Weight (lbs)	133	135	172	175	135	172	175

1– Natural Gas BTU/h

2– DOE AFUE based upon Isolated Combustion System (ICS)

3– Installer must supply one or two PVC pipes: one for combustion air (optional) and one for the flue outlet (required). Vent pipe must be either 2” or 3” in diameter, depending upon furnace input, number of elbows, length of run and installation (1 or 2 pipes). The optional Combustion Air Pipe is dependent on installation/code requirements and must be 2” or 3” diameter PVC.

4– Minimum Circuit Ampacity = (1.25 x Circulator Blower Amps) + ID Blower amps. Wire size should be determined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes.

5– Maximum Overcurrent Protection Device refers to maximum recommended fuse or circuit breaker size. May use fuses or HACR-type circuit breakers of the same size as noted.

Notes:

•All furnaces are manufactured for use on 115 VAC, 60 Hz, single-phase electrical supply.

•Gas Service Connection ½” FPT

•Important: Size fuses and wires properly and make electrical connections in accordance with the National Electrical Code and/or all existing local codes.

SS-GMV95 www.goodmanmfg.com 3