Field Controls UV-E IV. Maintenance, Replacement Procedure, VI. Troubleshooting Guide

Page 7

IV. MAINTENANCE

1.Inspect and clean lamp at least every 6 months.

2.Replace your UV-Aire™ Air Purifying System lamp once a year to maintain the lamps maximum output intensity. The lamp should operate continuously for maximum lamp life and light effectiveness.

V.REPLACEMENT PROCEDURE

VERY IMPORTANT: Turn switch on unit to ‘OFF’ position and disconnect from power source.

1.Remove wire tie or locking mechanism from latch on unit.

2.Unplug ballast plug from end of lamp.

3.Remove the wing nut on securing bracket. Swing out securing bracket to clear lamp.

4.Slide lamp out carefully.

NOTE: When replacing the lamp, always wipe off lamp before installing.

5.Replace lamp following the appropriate procedure based on bracket selection in the installation section.

6.UV lamps contain a small amount of mercury, like a typical fluorescent lamp. Check with your local waste management authority for local disposal or recycling requirements. According to the EPA’s Universal Waste Rule, these types of lamps may be disposed of into household waste

7.After replacing lamp, make sure a new Lamp Replacement Label (supplied with lamp replacement) is applied to the housing and dated with the date of installation.

8.Replace wire tie or locking mechanism to latch.

VI. TROUBLESHOOTING GUIDE

1.If unit does not light up replace bulb.

2.If unit still does not light up after replacing bulb, replace ballast.

VII. REPLACEMENT PARTS LIST

 

Lamp Length

 

LAMP

BALLAST

 

 

(Field Controls Part Number)

(Field Controls Part Number)

 

 

 

 

12”

46365401

46365506

 

 

 

 

 

18”

46365402

46365506

 

 

 

 

 

28”

46365403

46365506

 

 

 

 

 

For replacement parts, contact your local heating service company. Any questions, please contact Field Controls at:

Phone: 252-522-3031

Fax: 252-522-0214

Email: sales@fieldcontrols.com

WARNING: Never expose eyes or skin to UVC light from any source. Looking directly at the UVC light may cause permanent eye damage or blindness. Never operate the UV-Aire™ Air Purifying System out of the plenum. Avoid touching the glass portion of the lamp with your hands.

Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 120/240 volt application Safety ConsiderationsItems Included in KIT General Information II. InstallationPage Lamp Installation Page Diagram a III. Bulb Mounting Bracket Selection and InstallationVII. Replacement Parts List IV. MaintenanceReplacement Procedure VI. Troubleshooting GuideProvisions VIII. Flex Duct Installation

UV-E specifications

Field Controls has introduced the UV-E, a cutting-edge UV-C air purification system designed to enhance indoor air quality and mitigate harmful airborne pathogens. Engineered for residential and commercial applications, the UV-E utilizes advanced ultraviolet light technology that has proven effective in neutralizing viruses, bacteria, and mold spores that can pose health threats to occupants.

One of the standout features of the Field Controls UV-E is its high-efficiency UVC lamp, which emits at a germicidal wavelength of 254 nanometers. This specific wavelength is optimal for disrupting the DNA and RNA of microorganisms, rendering them inactive and incapable of reproduction. The UV-E operates continuously, providing 24/7 protection against airborne pathogens, ensuring a healthier indoor environment at all times.

The system is designed with ease of installation in mind, seamlessly integrating into most heating, ventilation, and air conditioning (HVAC) systems. With flexible mounting options, including duct and surface-mounted configurations, the UV-E can be tailored to fit a variety of spaces, making it an ideal solution for both residential homes and larger commercial facilities.

In addition to its practical benefits, the UV-E also incorporates innovative safety features. The lamp is equipped with a safety shield, which prevents UV radiation from escaping the housing and ensures it operates safely in occupied spaces. Furthermore, the system includes a simple to use indicator that notifies users when it's time to replace the UV lamp, ensuring optimal performance and peace of mind.

The UV-E is also notable for its energy efficiency. Utilizing low-energy UV-C lamps reduces energy consumption while offering high levels of purification. This not only contributes to lower utility bills but also aligns with environmentally friendly practices, making it a sustainable solution for indoor air quality management.

In summary, the Field Controls UV-E stands out for its effective air purification capabilities, ease of installation, user-friendly features, and energy efficiency. By employing advanced UV-C technology, the UV-E contributes significantly to creating safer indoor air environments for homes and businesses alike.
Top Page Image Contents