G24MCE Parts Identification
|
| 7 |
1 |
|
|
|
| 4 |
2 |
|
|
3 |
|
|
| 1 - | COMBUSTION AIR FAN |
| 2 - | PRESSURE SWITCH |
| 3 - | GAS VALVE |
| 4 - CAPILLARY TUBE LIMIT | |
5 | 5 - | BURNERS |
6 - CONTROL BOARD | ||
| 7 - | HIGH LIMIT |
| 8 - | MAIN FAN |
6 |
|
|
8 |
|
|
UPFLOW POSITION
8 |
6 |
1 |
7 |
4 |
2 |
3 |
5 |
DOWNFLOW POSITION
WARNING
This appliance must be earthed.
WARNING
This product contains glass fibre insulation.If in, sulation is disturbed during installation, mainte, nance or repair, persons may be exposed to irrita, tion to the skin, eyes and lungs. Tears in the insula, tion should be repaired straight away.
WARNING
Do not use this furnace if any part has been under, water. Immediately call a qualified service techni, cian to inspect the furnace and to replace any part of the control system and any gas control which has been under water.
CAUTION
Before attempting to perform any service or mainte, nance, turn the electrical power to unit OFF at isola, tor switch.
WARNING
If overheating occurs or if gas supply fails to shut off, shut off the manual gas valve to the appliance before shutting off electrical supply.
IMPORTANT
Any additions, changes, or conversions required in order for the appliance to satisfactorily meet the ap, plication needs must be made by a Lennox service technician using factory specified and approved parts.
Page 2