Accessibility Clearances Minimum, Flame Sensor

Accessibility Clearances (Minimum)

WARNING

To avoid death, personal injury or property damage due to fire, clearances to combus- tible surfaces listed as below must be observed.

36 inches front clearance is required for servicing or clean- ing.

NOTE: In all cases, accessibility clearance must take precedence over clearances from the enclosure where accessibility clearances are greater.

CLEARANCES TO COMBUSTIBLE SURFACES

GUD_ MODEL FURNACES (Inches)

FRONT	3	TOP	1

RIGHT	1	FLUE	0

LEFT	1	FLOOR	C

REAR	0	----	----

C = If placed on combustible floor, floor MUST be wood only.

High Altitude Installations

For installations above 4000 feet, please refer to your Amana distributor for required kit(s).

Gas	Altitude	Kit	Orifice	Manifold
Gas	Altitude	Kit	Orifice	Pressure
				Pressure
Natural	0-4000 Ft.	None	#43	3.5" W.C.
Propane	0-4500 Ft.	LPTK09	#55	10.0" W.C.

NOTE: In Canada, gas furnaces are certified to 4,500 feet only.

IMPORTANT NOTES:

1.All furnaces have a redundant gas valve and blower door interlock switch.

2.All furnaces are manufactured for use on 115 VAC, 60 Hz, single phase electrical supply.

3.IMPORTANT: While the data is presented as a guide, it is very important to properly size fuses and wires and make electrical connections in accordance with the National Electrical Code and/or all existing local codes.

4.Performance figures are based on Department of En- ergy information and requirements under continuous operating conditions. Performance will vary with weather conditions and use.

5.Drain connections must conform to local codes.

6.Installer must supply the following gas line fittings according to which entrance is used:

Top	Two 90° Elbows
	One Close Nipple
Left	One 90° Elbow
Right	One 90° Elbow
	One 45° Elbow
	One Close Nipple

Flame Sensor

Flame sensor output is 1 to 4 microamps at 115 volts.

Filters

Side Return Filters

Minimum Recommended Size

Size_Air Flow	Disposable*	Permanent*
045_30	1 - 24x24 (576)	1 - 16x25 (280)
070_30	1 - 24x24 (576)	1 - 16x25 (280)
070_40	2 - 16x25 (768)	1 - 16x25 (372)
090_35	2 - 14x25 (692)	1 - 16x25 (342)
090_50	2 - 20x25 (960)	2 - 16x25 (465)
115_50	2 - 20x25 (960)	2 - 16x25 (465)

*Quantity - Inches (Total Minimum Surface Area in Square Inches) Permanent filter sizes are as shipped with furnace. The minimum permanent filter size area is based on allowable face velocity of 620 feet per minute.

Bottom Return Filter Sizes

Model	Filter Size (Inches)	Type
45	14 x 25 x 1	P
70	16 x 25 x 1*	P
90	20 x 25 x 1	P
115	20 x 25 x 1	P

P = Permanent

* As Shipped With Furnace

The figure below shows how the filter is retained over the bottom return air opening.

Filter Retainer

Filter

Furnace Bottom

Filter Retainer

GUD-X specifications

The Amana GUD-X is a top-tier washer and dryer combo, designed for households seeking a reliable and efficient laundry solution without compromising on space. This model stands out not just for its streamlined appearance but also for its robust features and innovative technologies, making laundry day a breeze.

One of the primary characteristics of the Amana GUD-X is its compact yet powerful design. It is ideal for apartments, small homes, or any setting where space is at a premium. The combination of washer and dryer into a single unit allows users to maximize their laundry capabilities without the need for separate machines.

The GUD-X boasts a generous capacity, typically around 3.5 cubic feet for washing and 5.9 cubic feet for drying, which means it can handle substantial loads, accommodating families and busy lifestyles. The washer features multiple wash cycles, including options for delicate fabrics, heavy-duty loads, and quick wash settings, catering to a variety of laundry needs. The dryer complements this flexibility with a similar range of drying cycles, ensuring that clothes come out perfectly dry and fresh.

Efficiency is one of the hallmark features of the Amana GUD-X. It is designed with energy-saving technologies, including a high-efficiency wash system that reduces water usage without sacrificing cleaning performance. The energy-efficient dryer also incorporates moisture sensors that help prevent over-drying, thereby saving energy and extending the life of your garments.

The control panel of the GUD-X is user-friendly, featuring simple settings and clear indicators that make selecting cycles straightforward. Additionally, it often includes a self-cleaning feature, which helps maintain the interior and keep it odor-free.

Another notable feature is its quiet operation, allowing users to run laundry at any time of day without disturbing the peace in their homes.

Overall, the Amana GUD-X presents a perfect blend of functionality, efficiency, and space-saving design, making it an excellent choice for anyone looking to streamline their laundry process while ensuring quality and performance in every load. Whether you're washing delicate items or heavy towels, the Amana GUD-X rises to the occasion, making it a worthwhile investment for modern living.