Pilot Flame Adjustment

PILOT ADJUSTMENT

Locate the pilot adjustment screw on the valve. The pilot flame should surround at least the top 3/8” of the powerpile (pilot generator) or thermocouple (see below). The pilot is unregulated so it will be operating at inlet line pressure (Max. 7” w.c. for natural gas and 11” w.c. for propane). To decrease the pilot flame, turn the screw clockwise (approximately seven to nine full turns to bottom of pilot light channel) until you produce sufficient flame at the minimum noise level.

3/8 TO 1/2 INCH

PILOT FLAME SHOULD ENVELOP 3/8 TO 1/2 INCH

OF THE TIP OF THE GENERATOR.

MAINTENANCE INSTRUCTIONS

1.Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a professional service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that control compartments, burners, pilot burners, circulating air passageways and venting systems of the appliance be kept clean.

2.If the appliance has been equipped with the optional WFF81-C fan kit assembly, the bearings of the motor should be oiled every six months with approximately 2 drops of S.A.E. 20 oil.

3.The appliance area must be kept clear and free of any combustible materials, gasoline and other flammable vapors and liquids.

4.It is essential that the flow of combustion and ventilation air not be obstructed.

5.Periodic examination of the entire ventilation system as a routine part of the safety performance check is recommended on an annual basis.

BURNER FLAME ADJUSTMENT - STAINLESS STEEL BURNER

123

Air

Shutter

1.FLAMETOO SOFT -Yellow Flame. Open air shutters until yellow tipping disappears.

2. FLAME TOO HARD - Deep Blue	3. NORMALFLAMES
Coloration. Closing air shutters
to a point where yellow tipping
begins, re-open slightly to
eliminate yellow tipping. Air
shutter adjustment is now correct.

NOTE: It is advised that the burner flames be checked at least twice during the heating season for any changes in burner characteristics. Vacuum burner compartment at start of heating season or as often as needed.

Page 12

W506F, W505F, W255F, W256F specifications

Louisville Tin and Stove, a well-respected name in the hearth products industry, has made significant strides in delivering high-quality wood and gas stoves. Among their impressive lineup, the models W256F, W505F, W506F, and W255F stand out for their exceptional features, advanced technologies, and distinctive characteristics.

The W256F model is renowned for its traditional design paired with modern efficiency. This stove is equipped with a large firebox that allows for longer burn times, ensuring a consistent heat output that effectively warms your living space. Its easy-to-use air control system provides users with optimal combustion, allowing you to adjust the flame intensity for a customized heating experience. The W256F also comes with a sleek glass door, enabling a beautiful view of the fire while maximizing heat retention.

Next in line, the W505F model showcases a more contemporary aesthetic. This stove features an innovative linings technology that promotes even heating and increases fuel efficiency. Its built-in catalytic combustor ensures that most of the smoke and particulate matter generated during combustion is burned off, making it an environmentally friendly choice. The W505F offers customizable trim options, allowing homeowners to match the stove seamlessly with their interior decor.

The W506F is another gem in this collection, notable for its impressive heating capacity. Designed for larger spaces, this model combines power with versatility. It features an advanced convection system that circulates warm air more effectively throughout the room. Additionally, the W506F incorporates a high-efficiency wood-burning design that offers reduced emissions and greater fuel economy, making it a sustainable option for eco-conscious consumers.

Finally, the W255F model caters to those who appreciate a compact yet powerful stove. Ideal for smaller homes or cabins, the W255F delivers robust heat output in a space-saving design. Its quick-response heating capabilities are enhanced by a reliable draft control system that ensures efficient fuel use. This stove also prioritizes safety, equipped with a heat shield to protect surrounding surfaces.

In summary, the Louisville Tin and Stove W256F, W505F, W506F, and W255F models lead the market with their distinctive features and innovative technologies. Together, they offer a range of options for consumers seeking efficiency, aesthetic appeal, and reliable performance. Whether you prefer a traditional classic, contemporary design, or a compact solution, these stoves are engineered to deliver warmth and comfort while upholding environmental standards.

PILOT ADJUSTMENT