Model 367AAN OIL Furnace | Bryant instruction

USER’S INFORMATION MANUAL

MODEL 367AAN

OIL FURNACE

NOTE TO INSTALLER:

This manual must be left with the equipment user.

!WARNING: If the information in this manual is not followed exactly, a ﬁre or explosion may result causing property damage, personal injury or loss of life.

—Do not store or use gasoline or other ﬂammable vapors and liquids in the vicinity of this or any other appliance.

—WHAT TO DO IF YOU SMELL OIL:

—Do not try to light any appliance.

—Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your fuel supplier from a neighbor’s phone. Follow the fuel supplier’s instructions.

•If you cannot reach your fuel supplier, call the ﬁre department.

—Installation and service must be performed by a qualiﬁed installer, service agency or the fuel supplier.

Do not use this furnace if any part has been under water. Immediately call a qualiﬁed service techni- cian to inspect the furnace and to replace any part of the control system and any oil control which has been under water.

367AAN specifications

The Bryant 367AAN is a highly efficient and reliable air conditioning unit designed for both residential and commercial applications. This model stands out in the market due to its impressive performance, advanced technologies, and energy-saving features that cater to varying climate conditions.

One of the principal features of the Bryant 367AAN is its SEER (Seasonal Energy Efficiency Ratio) rating, which can reach up to 17. This means that the unit operates efficiently, providing significant energy savings over time while delivering optimal cooling performance. With a high SEER rating, homeowners can enjoy a comfortable indoor environment without worrying about skyrocketing energy bills.

The 367AAN model is equipped with a two-stage compressor, which allows it to adjust its cooling capacity based on the current temperature demands. This feature promotes a consistent and comfortable indoor climate by ensuring that the system does not operate at full capacity when it is not needed. As a result, this air conditioning unit operates quietly while delivering consistent performance, making it an excellent choice for maintaining indoor comfort.

Another notable technology in the Bryant 367AAN is its use of environmentally friendly refrigerant, R-410A. This modern refrigerant is designed to minimize ozone depletion and is more efficient than older refrigerants. The use of R-410A not only makes this unit eco-friendly but also allows it to deliver high-efficiency cooling performance that meets stringent environmental standards.

Additionally, the 367AAN features a sound-dampening system, which includes a specially designed compressor compartment. This design minimizes operational noise, ensuring that the unit runs quietly, making it suitable for residential areas where noise can be a concern. Homeowners can enjoy peace and quiet while their air conditioning system is operating.

Furthermore, reliability is a key characteristic of the Bryant 367AAN, built with durable materials that can withstand various weather conditions. The unit is also equipped with a factory-installed filter drier and a protective coating that safeguards against corrosion, thus enhancing its longevity and performance.

In conclusion, the Bryant 367AAN air conditioning unit is a well-rounded choice for anyone seeking energy-efficient cooling with advanced technology and a quiet operation. Its two-stage compressor, environmentally friendly refrigerant, and robust design make it a dependable option for maintaining comfort in any environment. Whether for residential or commercial use, the 367AAN is sure to deliver throughout its service life.