Bryant 313AAV/JAV manual Dimensions

DIMENSIONS
(664mm)	(733mm)
	28-7/8"
26-1/8"
(FLUE COLLAR)
	(641mm)
	25-1/4"
	22-9/16"
	(573mm)
	JUNCTION BOX
5-15/16"	LOCATION
(135mm)
(22mm)
7/8" DIA
ACCESSORY	1/2" (13 mm) DIA.
	THERMOSTAT WIRE ENTRY
	3-15/16" (84mm)
	LEFT HAND GAS
33-5/16"	ENTRY
		24-7/8"
(846mm)
		(632mm)
	7/8" (22mm) DIA.
	ACCESSORY
11/16"	(549mm)	5-1/2"
(17mm)		(140mm)
	21-5/8"
		1-11/16"
	BOTTOM INLET	(43mm)
	24"
	CASING
	(610mm)

A			2-7/16"
			(62mm)	AIRFLOW
			1-5/16"
D	13/16"		(33mm)	19"	13/16"
			1-1/8"	(483mm)	(21mm)
F	(21mm)	4-13/16"	(29mm)	OUTLET
		(122mm)
				1/2" DIA. K.O.THERMOSTAT		9-5/8"
				WIRE ENTRY (13mm)	11/16" 7-3/4"
		8-9/16"		1-3/4" DIA.RIGHT HAND		(244mm)
		(217mm)			(17mm)(197mm)
				GAS ENTRY (44mm)		11-1/2"
						(292mm)
				7/8" DIA. K.O. WIRE ENTRY
		ALTERNAT E		(22mm)
	JUNCTION BOX
	LOCATIONS (TYP)
	VENT OUTLET
	5 PLACES (TYP)				14-7/8"
				7/8" DIA. ACCESSORY	(378mm)
	5-1/2" (140mm)			(22mm)
E	11/16"	3-3/4"		1-1/2" (38mm)	1-1/4"
	(17mm)			(560mm)
		(95mm)			(32mm)
				22-1/16"	1"
				SIDE INLET	(25mm)

313AAV/JAV

A04037

1.Two additional 7/8-in. (22 mm) dia. knockouts are located in the top plate.

2.Minimum return-air openings at furnace, based on metal duct. If flex duct is used, see flex duct manufacturer’s recommendations for equivalent diameters.

3.Minimum return-air opening at furnace.

a.For 800 CFM-16-in. (406 mm) round or 14-1/2 x 12-in. (368 x 305 mm) rectangle.

b.For 1200 CFM-20-in. (508 mm) round or 14-1/2 x 19-1/3 in. (368 x 491 mm)rectangle.

c.For 1600 CFM-22-in. (559 mm) round or 14-1/2 x 22-1/16-in. (368 x 560 mm) rectangle.

d.For airflow requirements above 1800 CFM, see Air Delivery table in Product Data literature for specific use of single side inlets. The use of both side inlets, a combination of 1 side and the bottom, or the bottom of single side inlets. The use of both side inlets, a combination of one side and the bottom, or the bottom only will ensure adequate return air openings for airflow requirements above 1800 CFM.

		A		D		E		F	VENT	MEDIA CABINET
313AAV/JAV	CABINET				BOTTOM		TOP VENT		CONNECTION
			SUPPLY WIDTH							SIZE
UNIT SIZE		WIDTH			RETURN WIDTH			OUTLET	SIZE
				IN (MM)						IN (MM)
		IN (MM)				IN (MM)		IN (MM)	(see Notes 1 & 2)
024045
	14---	3/16 (360)	12---	9/16 (319)	12---	11/16 (322)	9---	5/16 (237)	4	16 (406)
048070	17	--- 1/2 (445)	15---	7/8 (403)	16	--- 1/8 (410)	11---	9/16 (294)	4	16 (406)
048090		21 (533)	19---	3/8 (492)	19	--- 1/2 (495)	13---	5/16 (338)	4	20 (508)
060110		21 (533)	19---	3/8 (492)	19	--- 1/2 (495)	13---	5/16 (338)	4	20 (508)
060135	24	--- 1/2 (622)	22---	7/8 (581)		23 (584)	15---	1/16 (383)	4 (Note 1)	24 (610)

1.135 size furnaces require 5---in. (127 mm) vents. Use a 4---5 in. (102---127 mm) vent adaptor between furnace and vent stack.

2.See installation instructions for complete installation requirements.

9