Manley Labs 50/50 owner manual Mains Connections, Brown Live

Page 4

MAINS CONNECTIONS

Your amplifier has been factory set to the correct mains voltage for your country. The voltage setting is marked on the serial badge, located on the rear panel. Check that this complies with your local supply.

Export units for certain markets have a moulded mains plug fitted to comply with local requirements. If your unit does not have a plug fitted the coloured wires should be connected to the appropriate plug terminals in accordance with the following code.

GREEN/YELLOW

EARTH

terminal

BLUE

NEUTRAL

terminal

BROWN

LIVE

terminal

As the colours of the wires in the mains lead may not correspond with the coloured marking identifying the terminals in your plug proceed as follows;

The wire which is coloured GREEN/YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured GREEN or GREEN and YELLOW.

The wire which is coloured BLUE must be connected to the terminal in the plug which is marked by the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal in the plug which is marked by the letter L or coloured RED.

DO NOT CONNECT/SWITCH ON THE MAINS SUPPLY UNTIL ALL OTHER CONNECTIONS HAVE BEEN MADE.

Image 4
Contents Manley Contents Introduction Thank YOUMains Connections Brown LiveConnecting Your Amplifier Output B+ Mains IEC Mains RCA Fuses Left Manley Bias Procedures Operational Notes Tube LifeSpecifications Warranty Warrantyregistration

50/50 specifications

Manley Labs has long been synonymous with high-quality audio equipment, and the Manley Labs 50/50 power amplifier is no exception. This remarkable amplifier is designed to deliver exceptional sound quality with a range of features and technologies that set it apart in the world of audio amplification.

At its core, the Manley 50/50 is a vacuum tube power amplifier, which means it utilizes vacuum tubes to amplify audio signals. This technology is beloved by audiophiles for its warm, rich sound reproduction. The 50/50 employs a unique combination of 6L6GC power tubes, providing an output of 50 watts per channel. This power output is ample for driving a wide variety of speakers, making it suitable for both home use and professional studio applications.

One of the standout features of the Manley 50/50 is its all-tube design, which ensures that the amplifier delivers a natural, musical sound that many believe cannot be matched by solid-state amplifiers. The 50/50 incorporates a push-pull configuration that results in low distortion and a wide frequency response. This means that listeners can experience a full spectrum of sound with incredible clarity.

The amplifier also boasts an impressive frequency response that ranges from 20 Hz to 20 kHz, allowing it to reproduce low bass tones and high frequencies with exceptional fidelity. This range is critical for achieving an accurate soundstage, making it a favorite among sound engineers and music enthusiasts alike.

Another notable aspect of the 50/50 is its user-friendly design. The front panel features a simple, yet elegant layout with power switches, LED indicators, and a robust set of speaker binding posts. This allows for easy connectivity and operation, making it accessible to both seasoned audiophiles and newcomers to high-end audio.

The build quality of the Manley 50/50 is equally impressive. Constructed in the United States, the amplifier features a sturdy chassis and a meticulous hand-wired design. This attention to detail ensures longevity and durability, making the amplifier a worthwhile investment for any serious audio enthusiast.

In conclusion, the Manley Labs 50/50 power amplifier stands out in the realm of audio amplification due to its all-tube design, impressive power output, and remarkable sound quality. With its combination of modern engineering and classic design, the 50/50 continues to be a favored choice for those seeking a high-fidelity listening experience.