Lennox Hearth 50692101 Secure Connection Recommended, Enable Wi−Fi To enable the Wi−Fi feature to

Enabling the thermostat’s Wi-Fi feature from the Home screen
network security key or passphrase			press any line to edit it					Secure Connection Recommended!
								Make sure the router is capable of, and set to operate
displays information here as keys pressed		network name (SSID)		5.2			none
	6				security			in wireless network
		press here to enter network name					WEP	program or contact service provider for help. A se-
					is WPA2
					5.2		WPA	cure wireless network is recommended over an open
		password						(unsecured) network. You will need the homeowner’s
					a
								approval and router password to enable Wi−Fi in a se-
	6		press here to enter Wi−Fi AP (router) password			WPA2
								cured connection.
			7 END	connect				Enable Wi−Fi To enable the Wi−Fi feature to
								communicate with a wireless router:
			type the network security key or passphrase for					1.	Press and release n the l	ower left corner of the
			(locked Wi−Fi Access Point [AP])						HOME screen (see START HERE). The screen
	6 press here to enter Wi−Fi AP (router) password								changes from the Home Screen to the WI−FI SET-
									TINGS screen.
WI−FI SETTINGS			7 END	connect				2. Press the Wi−Fi enable button.
								3. Press next as necessary; then press accept after
			NETWORK						reading the User Agreement.
Wi−Fi					5.1			4.	Press NETWORK SETTINGS; this screen shows a
disable									graphical view of buttons representing Wi−Fi options
7 END
			5.0					5.2	OPEN and SECURE wireless networks and a button
			5.0 UNSECU-						for creating a new access point (AP).
			RED ACCESS	5.1 SECURE				5.	Decide which of these buttons you need to select:
			POINT
				Access Points					5.0
				5?					5.1
				5.2 CREATE NEW AP					5.2
									5.2a, you have the option
				User Agreement					of selecting a security level (default is none; choose
1									from WEP, WPA, WPA2, depending on the security
	WI−FI SETTINGS								defined in the homeowner’s router); the password field
START				next...					appears.
HERE	4			next...				6. When you touch in one of the input fields (press here
Wi−Fi				3					to enter...), the keyboard tool appears. Enter password
									(if simply logging into an existing network) or enter the
	NETWORK		Wi−Fi
				accept	decline				network name if creating a new AP. If you mistype the
	SETTINGS		enable
1			2						password or if you cannot access the selected net-
									work, a message will alert you to retry.
								7. Press connect to complete the connection. Note that
									changes to

Figure 22. Wi−Fi setup

Page 17

icomfort Wi−Fit 7−Day Programmable Communicating Thermostat