Lennox Hearth T150C Maintenance, Small Area Paint TOUCH-UP, ASH Removal and Disposal

Page 17

MAINTENANCE

SMALL AREA PAINT TOUCH-UP

The stove body is painted with a quality high- temperature stove paint. Use only model TSPK-B Stove Paint, Catalog # 70K99. Do not touch-up your stove with any other paint.

Using one small piece of 320 grit sand paper and lightly sand the blemish so that the edges are “feathered” or smooth to the touch between the painted and bare sur- faces. Do not let the sand paper gum up with paint, as this will cause scratches on the metal surface. If there are any scratches, use 600 grit sandpaper instead. Mask off surfaces you do not want painted. Paint lightly over the bare surface first as this will act as an under- coat. Then paint over a larger area in smooth even strokes to blend.

See Break-In Period on page 14 for information on curing the paint.

ASH REMOVAL AND DISPOSAL

CAUTION: MAKE SURE THAT THE FIRE IS OUT AND THE STOVE IS COLD BEFORE REMOVING ASHES FROM FIREBOX!

Ashes can hold live embers for several days, and must be disposed of with care.

NEVER place ashes in a cardboard box or any other combustible receptacle.

Proper Disposal of Ashes:

Ashes should be placed in a metal container with a tight fitting lid. The closed container of ashes should be placed on a noncombustible floor or on the ground, well away from all combustible materials, pending final dis- posal. If the ashes are disposed of by burial in soil or other wise locally dispersed, they should be retained in the closed container until all cinders have thoroughly cooled.

DOOR AND GLASS GASKETS

An 1/2" (13 mm) spun fiberglass gasket provides the seal around the fuel door, a 1/8” x 1” (3.2 mm x 25.4

mm)flat woven gasket glass provides the seal around the door glass and the side windows have a 1/8” (3.2

mm)thick lytherm gasket Should these gaskets become frayed or damaged, they should be replaced with the same size and type as the original gasket. Contact your dealer for ordering. Use high temperature silicone sealer as an adhesive for the fuel door gasket. The (door) glass gasket has a self-adhesive backing. The side window gasket does not require an adhesive (see Replacement Parts, pages 23-24).

WARNING: THE GASKETS MUST BE KEPT IN GOOD

CONDITION. DO NOT LEAVE THE STOVE BURNING WITH THE DOOR OPEN OR AJAR. THIS WILL CAUSE EXCESSIVE HEAT BUILD UP IN THE UNIT AND COULD IGNITE SURROUNDING COMBUSTIBLES AS WELL AS DAMAGE THE STOVE BY OVERFIRING IT. OVERFIRING IS A CONDITION WHERE EXCESSIVE TEMPERATURES ARE REACHED, BEYOND THE DESIGN CAPABILITIES OF THE STOVE (SUCH DAMAGE IS NOT COVERED BY THE MANUFACTURER'S WARRANTY).

SERVICING GLASS

CAUTION: BE CAREFUL NOT TO ABUSE DOOR ASSEMBLY BY STRIKING OR SLAMMING IT. IF THE DOOR ASSEMBLY OR GLASS IS BROKEN OR DAMAGED, THEY MUST BE REPLACED BEFORE HEATER CAN BE SAFELY OPERATED. USE ONLY COMPONENTS PROVIDED BY THE MANUFAC- TURER AS REPLACEMENT PARTS.

Cleaning Glass: Ensure stove is cold prior to cleaning glass. A commercial glass cleaner designed for stoves is recommended. Do not use abrasive cleaners.

Replacing Glass:

1.Remove door from stove by lifting door up and off hinge pins: Place the door on a flat protected (towel) clean flat surface with the inside of the door facing up. Remove the glass clips (by removing screws holding clips), then carefully remove broken glass one piece at a time (protective gloves are recom- mended).

2.Clean the area where the glass with gasket will be installed.

3.Install new glass with gasket (use only factory 5-mm glass with glass channel gasket. Do not substitute). Carefully reinstall glass clips. Be very careful not to overtighten screws.

4.Reinstall door.

PAGE 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Installation and Operation Manual Important Warnings Table of Contents Smoke Detectors Planning Your InstallationQuestions to ASK Local Building Official USA Requirements Floor ProtectionCanada Requirements Standard Parallel Hearth PAD ShownCombustible Wall Clearance Corner Installation Parallel InstallationSelecting a Location Installing Optional Marble Accents InstallationReduced Masonry Structure Clearance Alcove Protected Wall ClearanceChimney Inspection Acceptable Connector Pipe for INSTALLA- TionsTypes of Chimneys Draft Requirements Chimney Height RequirementsResidential Installation Diagram Page Primary AIR Control Product Features and ControlsPrimary Air Control Knob Catalytic CombustorFuel Door Primary AIR Control Care and OperationDoor Operation GlassBREAK-IN Period HOW to Start and Maintain a FireBypass Damper Control RefuelingBurn Recommended Fuel FuelSeasoning Guide Wood StorageSmall Area Paint TOUCH-UP MaintenanceASH Removal and Disposal Door and Glass GasketsCleaning Blower Intake Catalyst ReplacementCreosote Formation and Need for RE- Moval Stove SeamsCatalytic Combustor Troubleshooting Catalyst Substrate Catalyst Substrate CrackingCatalyst Peeling TAR and Liquid Creosote Leaking from Metal Flue JointsSpecifications Model T150C Model Description Replacement Parts for Model T150CPart Qty Dimensions FB-1 Component Diagrams T150CTop View Showing Brick Installed Firebrick 1 ¼ thickTemperature Probe TP-FS Optional Accessories T150CSAFETY/LISTING Label EPA Label Ownership Records Service and Maintenance LOGWest Taft Avenue Orange, CA

T150C specifications

The Lennox Hearth T150C is a premium heating solution that epitomizes efficiency, reliability, and modern design. This wood-burning fireplace insert is crafted to enhance both the aesthetic appeal and functional warmth of any living space. With its elegant look and cutting-edge technologies, the T150C provides homeowners with an exceptional heating experience.

One of the standout features of the Lennox Hearth T150C is its high-efficiency combustion system. This system is designed to maximize heat output while minimizing emissions, making it an environmentally friendly choice for wood burning. The insert boasts an impressive efficiency rating, allowing homeowners to utilize less wood while still achieving a warm and cozy atmosphere. This efficient burning technology also means that less smoke and ash are produced, making it easier to maintain and keep clean.

The T150C features a large viewing window, framed by a sleek cast iron door, which allows for an unobstructed view of the mesmerizing flames. The design not only enhances the fireplace’s aesthetic appeal but also provides an effective heat radiating feature. The ceramic glass window can withstand high temperatures, ensuring both safety and durability while allowing the beauty of the fire to be enjoyed from several angles.

Additionally, the T150C is designed with adjustable air controls that allow users to customize the fire's heat output and burn time. This feature provides flexibility in managing the environment and comfort levels in the home. Its intuitive design makes it easy for anyone to operate, ensuring that users can enjoy a warm fire with minimal effort.

Another highlight of the Lennox Hearth T150C is its compact design, making it suitable for various room sizes. Its streamlined look and modern finish allow it to seamlessly integrate with both traditional and contemporary home decors.

Overall, the Lennox Hearth T150C wood-burning fireplace insert combines efficiency, elegance, and advanced heating technology, making it an ideal choice for anyone looking to enhance their home with a reliable and attractive source of warmth. With its blend of functionality and style, the T150C sets a standard for wood-burning fireplaces in the market.
Top Page Image Contents