Important Safety Instructions

CAUTIONATTENTION:

RISKOFELECTRIC		RISQUE DECHOCELECTRIQUE
SHOCK DONOTOPEN		NE PASOUVRIR

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Warning: To reduce the risk of fire or electric shock, do not

expose this unit to rain or moisture.

The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

Do not place this unit on an unstable cart, stand or tripod, bracket or table. The unit may fall, causing serious injury to a child or adult and serious damage to the unit. Use only with a cart, stand, tripod,

bracket or table recommended by the manufacturer or sold with the unit. Any mounting of the device on a wall or ceiling should follow the manufacturer’s instructions and should use a mounting

accessory recommended by the manufacturer.

An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.

1.“An apparatus with Class I construction shall be connected to a mains sockets outlet with protective earthing connection.”

2.“Where the mains plug or an appliance coupler is used as the disconnect device, the disconnection device shall remain readily operable.”

3.“1A fuse is used to US market, voltage will be set to 115V before shipment: 500mA fuse is used to European market, voltage will be set to 230V before shipment.”

Read and follow all the safety and operating instructions before connecting or using this unit. Retain this notice and the owners manual for future reference.

All warnings on the unit and in its operating instructions should be adhered to.

Do not use this unit near water; for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool.

The unit should be installed so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet, that may impede the flow of air through its ventilation openings.

The unit should be situated from heat sources such as radiators, heat registers, stoves or other devices (including amplifiers) that produce heat.

The unit should be connected to a power supply outlet only of the voltage and frequency marked on its rear panel.

The power supply cord should be routed so that it is not likely to be walked on or pinched, especially near the plug, convenience receptacles, or where the cord exits from the unit.

Unplug the unit from the wall outlet before cleaning. Never use benzine, thinner or other solvents for cleaning. Use only a soft damp cloth.

The power supply cord of the unit should be unplugged from the wall outlet when it is to be unused for a long period of time.

Care should be taken so that objects do not fall, and liquids are not spilled into the enclosure through any openings.

This unit should be serviced by qualified service personnel when: A. The power cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the unit; or C. The unit has been exposed to rain or liquids of any kind; or D. The unit does not appear to operate normally or exhibits a

marked change in performance; or

E. The device has been dropped or the enclosure damaged.

ATTENTION

POUR …VITER LES CHOC ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUíAU FOND.

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT.

If an indoor antenna is used (either built into the set or installed separately), never allow any part of the antenna to touch the metal parts of other electrical appliances such as a lamp, TV set etc.

CAUTION

POWER LINES

Any outdoor antenna must be located away from all power lines.

OUTDOOR ANTENNA GROUNDING

If an outside antenna is connected to your tuner or tuner- preamplifier, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

a. Use No. 10 AWG (5.3mm2) copper, No. 8 AWG (8.4mm2) aluminium, No. 17 AWG (1.0mm2) copper-clad steel or bronze wire, or larger, as a ground wire.

b. Secure antenna lead-in and ground wires to house with stand-off insulators spaced from 4-6 feet (1.22 - 1.83 m) apart.

c. Mount antenna discharge unit as close as possible to where lead- in enters house.

d. Use jumper wire not smaller than No.6 AWG (13.3mm2) copper, or the equivalent, when a separate antenna-grounding electrode is used. see NEC Section 810-21 (j).

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS CONTAINED IN ARTICLE 810 - RADIO AND TELEVISION EQUIPMENT.

NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the ground cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

DO NOT ATTEMPT SERVICING OF THIS UNIT YOURSELF. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

Upon completion of any servicing or repairs, request the service shops assurance that only Factory Authorized Replacement Parts with the same characteristics as the original parts have been used,

and that the routine safety checks have been performed to guarantee that the equipment is in safe operating condition.

REPLACEMENT WITH UNAUTHORIZED PARTS MAY RESULT IN FIRE, ELECTRIC SHOCK OR OTHER HAZARDS.

10S specifications

The KRK 10S is a powerful subwoofer designed specifically for professional studio and home audio applications, offering a compact solution for enhancing low-frequency performance in music production and mixing. Renowned for its exceptional sound quality, the KRK 10S is an ideal companion for KRK's renowned studio monitors, delivering deep, accurate bass that enriches both music and audio editing experiences.

One of the standout features of the KRK 10S is its impressive 10-inch woofer, which has been engineered to provide an expansive low-frequency response. This ensures that users can hear every nuance of their music, from the thundering lows of bass instruments to the subtle details in the mix. The subwoofer boasts a frequency response range of 29 Hz to 133 Hz, enabling it to reproduce the most profound bass frequencies with clarity and precision.

The KRK 10S also incorporates advanced technologies designed to optimize performance. One such feature is its built-in limiter, which helps prevent distortion and ensures that the subwoofer operates within safe limits even at high volume levels. Additionally, the subwoofer comes with a rear-panel volume control, phase switch, and a low-pass filter that allows users to tailor the bass response to their specific acoustic environment. This level of customization is crucial for achieving the best possible sound, as it enables audio professionals to match the subwoofer's output precisely with the main studio monitors.

Another significant characteristic of the KRK 10S is its robust construction. The cabinet is made from high-quality, durable materials that minimize unwanted vibrations and standing waves, enhancing the overall acoustic performance. The enclosure is designed to be both lightweight and sturdy, making it easy to transport while ensuring longevity in any studio environment.

The subwoofer features balanced XLR and TRS inputs, making it compatible with a wide range of audio interfaces and mixers. This versatility allows users to easily integrate the KRK 10S into their existing setups without any hassle.

In conclusion, the KRK 10S is a professional-grade subwoofer that excels in delivering deep, accurate bass for both studio and home listening applications. With its combination of exceptional sound quality, advanced technologies, and robust construction, the KRK 10S significantly enhances the audio experience for music producers, sound engineers, and audiophiles alike.