Lennox Hearth MPE-36R warranty Important Safety and Warniing Information

Page 2

IMPORTANT SAFETY AND WARNIING INFORMATION

read THIS MANUAL IN ITS ENTIRETY and understand these Rules to follow for safety.

WARNING

If the information in this manual is not followed exactly, an elec- trical shock or fire may result causing property damage, per- sonal injury or loss of life.

IMPORTANT

Before starting your fireplace installation, read this instal- lation and operation manual very carefully to ensure you understand it completely and in entirety. Failure to follow these instructions may result in a pos- sible electric shock, fire hazard and/or injury or property damage and will void the warranty.

CAUTION

This appliance is mounted on rubber feet. The purpose of these feet is to ensure adequate air circulation beneath the fireplace. Do not remove these feet. Do not install the fireplace directly onto a carpet, rug, furniture or similar surfaces, which could hinder or block the airflow.

CAUTION

Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left oper- ating and unattended.

IMPORTANT

These fireplaces are designed as supplemental heaters. There- fore, it is advisable to have an alternate heat source when installed in a dwelling.

IMPORTANT

Cold climate installation recom- mendation: when installing this fireplace against a non-insulated exterior wall or chase, it is mandatory that the outer walls be insulated to conform to appli- cable insulation codes.

WARNING

To prevent contact with sag- ging or loose insulation, the appliance must not be installed againstvaporbarriersorexposed insulation. Localized overheat- ing could occur and a fire could result. Insulation and a vapor barrier should be placed a minimum of 2 inches from the appliance.

To prevent a possible fire, do not block air intakes or exhausts in any way. Do not use near soft surfaces, like a pillow, where openings may become blocked.

THIS APPLIANCE MAY BECOME HOT WHEN IN USE. TO AVOID BURNS, DO NOT LET BARE SKIN TOUCH HOT SUR- FACES. KEEP COMBUSTIBLE MATERI- ALS, SUCH AS FURNITURE, PILLOWS, BEDDING, PAPERS, CLOTHES AND CURTAINS AT LEAST 3 FEET (1 METER) FROM THE FRONT OF THIS APPLI- ANCE.

DO NOT OPERATE ANY HEATER WITH DAMAGED WIRING OR CONNECTORS, OR AFTER THE APPLIANCE MALFUNC- TIONS, OR IF IT HAS BEEN DROPPED OR DAMAGED IN ANY WAY.

ANY REPAIRS TO THIS FIREPLACE SHOULD BE PERFORMED BY A QUALI- FIED SERVICE TECHNICIAN.

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

UNDER NO CIRCUMSTANCES SHOULD THIS FIREPLACE BE MODIFIED. PARTS HAVING TO BE REMOVED FOR SERVIC- ING MUST BE REPLACED PRIOR TO OPERATING THE FIREPLACE AGAIN.

DO NOT USE THIS APPLIANCE OUT- DOORS. DO NOT EXPOSE FIREPLACE TO THE ELEMENTS (SUCH AS RAIN, ETC.).

THIS APPLIANCE IS NOT INTENDED FOR USE IN BATHROOMS, LAUNDRY AREAS OR SIMILAR INDOOR LOCA- TIONS. NEVER LOCATE THIS APPLI- ANCE WHERE IT COULD FALL INTO A BATHTUB OR OTHER WATER CON- TAINER.

DO NOT RUN ELECTRICAL WIRING OR POWER CORD UNDER CARPETING. OR COVER WITH THROW RUGS, RUNNERS OR SIMILAR MATERIALS.

FOR 120 VAC POWER CORD AVOID THE USE OF AN EXTENSION CORD BECAUSE THE EXTENSION CORD MAY OVERHEAT AND CAUSE A RISK OF FIRE. HOW- EVER, IF YOU HAVE TO USE AN EXTEN- SION CORD, THE CORD SHALL BE NO. 14 AWG MINIMUM SIZE AND RATED NOT LESS THAN 1800 WATTS, 15 AMPS. THE EXTENSION CORD MUST BE A THREE CONDUCTOR SHEATH CABLE WITH GROUNDING TYPE PLUG AND CORD CONNECTION.

THIS APPLIANCE HAS HOT AND ARCING OR SPARKING PARTS INSIDE. DO NOT USE IT IN AREAS WHERE GASOLINE, PAINT OR FLAMMABLE LIQUIDS ARE USED OR STORED.

THIS FIREPLACE SHOULD NOT BE USED AS A DRYING RACK FOR CLOTHING, NOR SHOULD CHRISTMAS STOCKINGS OR OTHER DECORATIONS BE HUNG NEAR IT.

USE THIS APPLIANCE ONLY AS DESCRIBED IN THIS MANUAL. ANY OTHER USE IS NOT RECOMMENDED BY THE MANUFACTURER AND MAY CAUSE A FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS.

IF APPLIANCE IS TO BE DISCON- NECTED, TURN OFF CONTROLS FIRST.

DO NOT INSERT OR ALLOW FOREIGN OBJECTS TO ENTER ANY VENTILATION OR EXHAUST OPENING, AS THIS MAY CAUSE AN ELECTRIC SHOCK, FIRE, OR DAMAGE TO THE APPLIANCE.

SAVE THESE INSTRUCTIONS.

Image 2
Contents Report # C1482763 Electric Fireplace 775,172M REV. G 04/2007Do not Block Airflow AT the Bottom AIR Intakes Important Safety and Warniing Information Congratulations Left Side Framing SpecificationsFireplace specifications Top ViewPRE-INSTALLATION Final Finishing Manual control Panel Main Power On/Off rear most switchFlame / Ember On/Off front most switch BREAK-IN PeriodRemote Control Operation HEATER/BLOWER Replacement PROCE- Dure MaintenanceCleaning the Glass Enclosure Panel optional kit Brick Panel Removal ProcedureReplacing Light Bulbs Bulb Replacement ProcedureAccess bulbs as follows Ember BedGround 120 v 1600 w Wiring Diagram 120 voltWiring 120 volt Ground 240 v 3000 w Wiring 240 voltGround GroundOptional kits, see Wall Thermostat & Wall Switch Wiring DiagramsInside Outside Inside OutsideBlack White Wall Thermostat Wiring 24 VACWall Thermostat White Left Side FireplaceRed Wire the wall switch prior to installing the fireplaceWall Switch Wiring 24 VAC Action Symptom Possible CausesCorrective Action Replacement Parts Description Mpe-36r Cat. No QtyReplacement Parts component diagrams Mpe-36r Wall Thermostat Accessory ComponentsWall Switch Kit Trim KitPage 775,172M REV.G 04/2007
Related manuals
Manual 18 pages 47.46 Kb

MPE-36R specifications

The Lennox Hearth MPE-36R is an innovative gas fireplace that exemplifies both modern aesthetics and cutting-edge technology. Designed to enhance any living space, this fireplace model combines efficiency and elegance, making it a popular choice among homeowners looking to create a cozy atmosphere.

One of the standout features of the MPE-36R is its realistic flame technology. The fireplace employs advanced burner technology that produces a beautiful, lifelike flame effect, simulating the flickering light and warmth of a traditional wood-burning fire. The adjustable flame height allows users to customize the ambiance to their preference, whether for a romantic evening or a lively gathering.

The MPE-36R also boasts a high-efficiency rating, ensuring that heat is effectively distributed throughout the room without wasting precious energy. It is designed with an insulated firebox, which aids in retaining heat and maximizing output. This efficiency not only contributes to lower energy bills but also makes it an environmentally friendly option for heating your home.

Another notable characteristic of the MPE-36R is its sleek design. The fireplace features a contemporary frame that can seamlessly blend into various interior styles, from modern to traditional. Optional aesthetic enhancements, such as decorative fire glass and logs, allow homeowners to personalize the look, making it a centerpiece in any room.

Incorporating smart technology, the MPE-36R can accommodate remote and Wi-Fi controls, ensuring that users can operate it effortlessly. This feature provides the convenience of adjusting the flames, heat settings, and even the timer from the comfort of their couch or via a smartphone app.

Safety is paramount, and the MPE-36R is equipped with several features to ensure peace of mind. The fireplace includes a safety shut-off system, which automatically turns off the unit in the event of a malfunction. Additionally, the glass front remains cool to the touch, significantly reducing the risk of burns, especially in homes with children or pets.

With its combination of exquisite design, efficiency, advanced technology, and safety features, the Lennox Hearth MPE-36R is a sophisticated choice for anyone looking to add warmth and style to their home. Perfect for both new constructions and renovations, it stands out as a leading option in the world of modern gas fireplaces.