Placing Glowing Embers
Remove the door (refer to Figure 6 ) by grasping the door firmly at the bottom and supporting the top. Lift up and away.
Place the orange plastic glowing ember coals along the back of the ember bed, behind and below the logs. Refer to Figures 13 and 14.
Reinstall the door. Catch all four tabs in the slots located at the four corners of the unit inside of the outer frame. Ensure the slots on the tabs engage the face frame as the door drops into place downwards.
Figure 13
Figure 14
Accessory Parts and components For The MPE-27
The accessory parts and components listed on this page are to be used only with your
If you encounter any problems or have questions concerning the installation or application of this system, please contact your distributor. For the name of your nearest distributor contact:
LENNOX Hearth Products
1110 West Taft Avenue
Orange, CA 92865
Model | Catalog Number | Weight |
H3428 | 78 lbs. |
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Accessory Components
The following items are available for use with this appliance.
Cabinet Surround Kit, Mantel |
|
|
- Honey Oak | h3432 |
H5093 |
Touch-Up Paint Kit
Repair of minor scratches and discoloration of the appliance's painted surfaces may be accom- plished with the use of this