Eureka 4750 manual HOW to Assemble

	G
	●
	FIG. 7b
	H
	●
	E
	●
	FIG. 7a
	FIG. 7
	FIG. 8a
	F
	●
	FIG. 8
	B
	●
	C
	●
	A
	●
12	FIG. 9

ENGLISH

HOW TO ASSEMBLE (continued)

Step 7: (FIG. 7) Then wrap the hose up and over the hose hook on the handle ●G as shown. Plug the end of the hose into the hose retainer hole on the base ●E (FIG. 7a) and then snap the hose into the hose holder on the tool caddy ●H (FIG. 7b).

Step 8: (FIG. 8) Place the bag container ●F on the vacuum by aligning the bottom groove of the bag container against the tab on cleaner base. Pivot the bag container up against cleaner and push to secure as it snaps into place.

Step 8A: (FIG. 8a) (some models only) Place Power Paw™ stair brush in slot in the special handle holder.

Step 9: (FIG. 9) Place the wand/crevice ●A /●B tool in the wand holder on the side of the vacuum. Store the dusting brush ●C on the brush holder on the back of the handle.

NOTE: Screws must be installed to properly secure the parts of the vacuum.